Sea Gull Lighting 44661-839 Installation Guide
Contents
1. E sea gull lighting IMPORTANT SAFETY INSTRUCTIONS e Be sure the electricity to the system you are working on is turned off either the fuse removed or the circuit breaker set at off e Use of other manufacturers components will void warranty listing and create a potential safety hazard e f you are unclear as to how to proceed contact a qualified electrician e You don t need special tools to install this fixture e Be sure to follow the steps in the order given e Under no circumstances should a fixture be hung on house electrical wires nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system e Read instructions carefully e Save these instructions BEFORE YOU BEGIN Carefully remove the fixture from the carton and check that all parts are included as shown in figure 1 Be careful not to misplace any of the screws or parts which are needed to install this fixture OUTLET BOX OUTLET BOX SCREWS cS Nan a K WZ NK A G Y y UNIVERSAL MOUNTING BAR D FIXTURE MOUNTING FIGURE 1 SCREWS F Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to this fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM HC 1430 081908 CLEANING To clean wipe fixture with a soft cloth Clean glass with a mild s2. lated wire around the green grounding screw G on the universal mounting bar D and tighten the green grounding screw G to secure NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES OUTLET BOX HOUSE UNIVERSAL GREEN GROUND WIRE MOUNTING GROUNDING BAR D SCREW G FIXTURE GROUND WIRE H WIRE CONNECTORS OUTLET BOX SCREWS FIXTURE MOUNTING SCREWS F FINAL ASSEMBLY STEP 5 Make sure no bare wires can be seen outside wire connectors After wires are connected tuck them carefully inside outlet box Push the fixture firmly over the mounting screws F and against the wall Secure canopy I in place with cap nuts E STEP 6 Place shade A on socket cup B and secure by threading retaining ring C onto socket Install lamps not supplied CANOPY 1 NOT INCLUDED
3. oap Do not use abrasive materials such as scouring pads or powders steel wool or abrasive paper ORDERING PARTS Keep this sheet for future reference and in case you need to order replacement parts Parts for this fixture can be ordered from place of purchase Be sure to use exact wording from illustration when ordering parts INSTALLATION IMPORTANT DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX Insert fixture mounting screws F into universal mounting bar D and run fixture mounting screws F all the way down to the heads STEP 2 Using outlet box screws not supplied fasten universal mounting bar D to outlet box through slots in universal mounting bar D Make sure fixture mounting screws F are perfectly horizontal so fixture hangs straight NOT INCLUDED INSTALLATION continued HC 1430 STEP 3 A Use a listed connector to connect the fixture hot wire black wire or round and smooth tracer to the supply hot wire B Use a listed connector to connect the fixture common wire white wire or square and rigid to the supply common wire C Gently try to remove the wires from the connector If you can remove the wires carefully re do the wiring connection GROUNDING INSTRUCTIONS The green grounding screw G is to be inserted into the hole with two raised dimples provided on the universal mounting bar D Wrap the ground wire from the fixture H and the ground wire from the outlet box bare metal or green insu
Download Pdf Manuals
Related Search