Kenroy Home 32551ACBZ Instructions / Assembly
Contents
1. WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED AVAILABLE PARTS ARE OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN 32551SHACBZ SHADE THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT HARP9 HARP CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 05 2014 32551ACBZ INSTRUCTIONS2. MODEL 52551 PACKING DIAGRAM lt ARDBOARD FINIAL HARP RUBBER WASHER STYROFOAM 12 KGS 2 CA TITLE 20 SOCKET ASSEMBLY STYROFOAM 12 KGS ASSEMBLY INSIRUCITIONS gt Swat READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO RUBBER ASSEMBLY WASHER IHIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE SHADE ASSEMBLY DIAGRAM 32551SHACBZ REPLACEMENT PART 3 SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY 2 PULL THE EXCESS POWER CORD THROUGH THE BASE HARP 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE ARP9 TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER REPLACEMENT 58 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATI MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED SoCKET 1 s 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE
Download Pdf Manuals
Related Search