AireRyder LK35454A/C-C Instructions / Assembly
Contents
1. fixture to the black or blue wire from the switch box The ridged unmarked wire from the fixture to the white wire from the switch box Carefully tuck the wires back into the switch box 8 Attach the switch box cover back to the switch box using the three switch box screws 9 Attach the glass shades to the glass holders and secure them with the socket rings 10 Install bulbs not included See relamping label at socket area or packaging for maximum allowed wattage 11 Turn on the power at the main fuse or circuit breaker box You can control the light with the pull chain LK35454 Page 1 aireRyder 060217 Hex Nut Washer ee Meal Pad dr 1P Cap F Pipe a an Nipple a For Mini Chandelier See Fig 1 Fig 2 amp Fig 3 Unscrew and take out the hex nut washer metal pad top cap cap and pipe a from nipple a See Fig 1 Take out the loop grounding pad and pipe b from the hardware package for Mini Chandelier Attach pipe b cap with the open side facing downward washer and grounding pad to the holder by inserting nipple a then secure them with the loop See Fig 2 Repeat the steps 3 5 for Light Kit Choose the length of the chain you need then weave the fixture wire and the fixture grounding wire through the chain Then connect one end of the chain with the loop by using2. ASSEMBLY AND INSTALLATION INSTRUCTIONS LK35454 WARNING BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE NOTE 1 Before installing consult local electrical codes for wiring and grounding requirements 2 The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless additional support is provided for the fan Motor Switch Box Black or Blue Wire lt A Smeet Wits Ridged Wire gt gt Hex Nut amp Washer 0m ax Switch Box Screw Center Plug a g l a Cover Canopy For Light Kit Set Screw 1 Remove the switch box cover fromthe swith Fr eee box of the fan by loosing the three switch box Anat screws 2 Unscrew the center plug from the switch box m Socket Ring cover and discard it 3 Secure the rod to nipple b 4 Unscrew the bolt nuts from the set screws Glass Shade 5 Attach a arm a to the rod and a arm b according to the drawing of the package Sei by inserting the set screws then secure it Rod with the bolt nuts Nipple b O Repeat with other arms a Eitur E Bolt Nut 6 Attach nipple a of the light kit to the a pint switch box cover then secure it with a washer and hex nut 7 Cut the redundant wires if necessary Pull out the wires from the switch box Make wire connections using the wire nuts Chain The smooth marked wire from the
3. one loop lock Secure the top loop to nipple c Thread the fixture wire and fixture grounding wire through the collar canopy top loop nipple c and mounting strap Connect the other end of the chain with the top loop by using the other loop lock Pull out the outlet wires and the house grounding wire from the outlet box Make wire connections using the wire nuts The smooth wire marked from the fixture to the black wire from the power source The ridged wire unmarked from the fixture to the white wire from the power source _ N oO as NO ee Pipe b Nipple a 7 Mounting Parts for Mini Chandelier H Outlet Box House Grounding Wire gt Wire Nut Hex Nut Washer Mounting Strap 7 Green Grounding Screw Mounting Screw Nipple c Canopy Top Loop Fixture Wire Loop Nipple d Fig 3 Attach the fixture grounding wire to the mounting strap with the green grounding screw Then connect it to the house grounding wire with a wire nut Carefully tuck the wires back into the outlet box 10 Attach the canopy to the mounting strap by inserting the top loop then secure it with the collar 11 Repeat the steps 9 11 for Light Kit aireRyder LK35454 Page 2 060217
Download Pdf Manuals
Related Search