World Imports WI900506 Installation Guide
Contents
1. FLUSH MOUNT FIXTURE INSTALLATION INSTRUCTIONS Please read carefully and save these instructions as you may need them at a later date CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION 1 Screw the 8 32 IPS FIXTURE SCREWS 4 onto the MOUNTING BRACKET 2 and thread the 8 32 HEX NUTS 13 onto the 8 32 FIXTURE SCREWS 4 Do not tighten the 8 32 IPS HEX NUTS 13 at this time 2 Pull the SUPPLY WIRES 5 amp 6 and the SUPPLY GROUND WIRE 7 out from the OUTLET BOX 1 and attach the MOUNTING BRACKET 2 to the OUTLET BOX 1 using the slotted holes on the MOUNTING BRACKET 2 and the 8 32 IPS MOUNTING SCREWS 3 provided 3 Place the COVER PLATE 12 over the OUTLET BOX 1 and onto the 8 32 IPS FIXTURE SCREWS 4 and adjust the 8 32 IPS FIXTURE SCREWS 4 until they protrude out from the COVER PLATE 12 1 4 Remove the COVER PLATE 12 and secure the position of the 8 32 IPS FIXTURE SCREWS 4 by tightening the 8 32 IPS HEX2. NUTS 13 against the MOUNTING BRACKET 2 4 Attach the BLACK SUPPLY WIRE 6 to the BLACK or SMOOTH FIXTURE WIRE 8 by using the WIRE CONNECTOR 11 In the same manner attach the WHITE SUPPLY WIRE 5 to the WHITE or RIBBED FIXTURE WIRE 9 Connect the FIXTURE GROUND WIRE 10 to the SUPPLY GROUND WIRE 7 using a WIRE CONNECTOR 11 not included ASSEMBLY AND INSTALLATION Continued Carefully tuck all wiring back into the OUTLET BOX 1 Place the COVER PLATE 12 back onto the 8 32 IPS FIXTURE SCREWS 4 and secure the COVER PLATE 12 into place using the DECORATIVE NUTS 14 provided Install the bulbs See markings and or labels on the fixture for maximum wattage DO NOT OVER LAMP Slide the GLASS PANELS 17 into the provided channels on the CAGE 15 Secure them into place using the GLASS CLIPS 16 INSTALLATION IS NOW COMPLETED OUTLET BOX MOUNTING BRACKET 8 32 IPS MOUNTING SCREW 8 32 IPS FIXTURE SCREW WHITE SUPPLY WIRE BLACK SUPPLY WIRE SUPPLY GROUND WIRE BLACK or smooth FIXTURE WIRE WHITE or ribbed FIXTURE WIRE FIXTURE GROUND WIRE WIRE CONNECTOR BON a SS COVER PLATE 8 32 IPS HEX NUT DECORATIVE NUT CAGE GLASS CLIP GLASS PANEL
Download Pdf Manuals
Related Search