Kenroy Home 93084AI Instructions / Assembly
Contents
1. THE LONG NIPPLE TO TOP OF THE ROOF S SLIDE TUBE CAP AND CANOPY OVER THE LONG NIPPLE AND SECURE WITH METAL WASHER AND NUT 6 INSTALL A 100 MAX MEDIUM BASE TYPE BULB NOT INCLUDED INTO THE SOCKET 7 SECURE THE ROOF TO THE LANTERN CAGE WITH TWO RUBBER WASHERS AND TWO FINIALS FINAL 2 PCS J RUBBER WASHER 2 PCS SOCKET ULB GLASS SHADE 93084GS REPLACEMENT PART COMPLETE INSTALLATION INSTRUCTIONS ON NEXT PAGE AVAILABLE PART 15 93084GS GLASS SHADE 93084 ASSEMBLY INSTRUCTIONS MOUNTING SCREW 2 PCS OUTLET BOX SUPPLY GROUND WIRE 8 32 SCREWS SUPPLIED WITH MOUNTING BLACK SUPPLY Ss WHITE SUPPLY WIRE WIRE CONNECTOR FIXTURE GROUND WIRE WHITE OR RIBBED BLACK OR SMOOTH FIXTURE WIRE FIXTURE WIRE OUNTING SCREW 2 PCS FIXTURE BODY INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES F YOU ARE NOT FAMILIAR WITH WIRING YOU SHOU2. LD USE QUALIFIED ELECTRICIAN THIS FIXTURE IS INTENDED TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE FIXTURE COMPLETE FIXTURE ASSEMBLY INSTRUCTIONS FIRST SEE PREVIOUS 1 SCREW TWO MOUNTING SCREWS INTO THE HOLES IN THE MOUNTING PLATE ATTACH THE MOUNTING PLATE TO THE OUTLET BOX USING THE OUTLET BOX SCREWS NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 2 CONNECT THE WHITE OR RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTORS PROVIDED CONNECT THE BLACK OR SMOOTH FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 5 TUCK THE WIRES CAREFULLY INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE 4 RAISE THE FIXTURE TO THE CEILING AND HOOK CANOPY TO THE MOUNTING SCREWS TWIST THE CANOPY CLOCKWISE SECURE THE CANOPY TO THE MOUNTING SCREVWS 5 SECURE THE TO THE CEILING BY TIGHTENING THE FOUR MOUNTING SCREVWS 6 RESTORE POWER YOUR NEW FIXTURE IS NOW READY FOR USE 10 2013 93084AI INSTALLATION
3. MODEL 93084 PACKING DIAGRAM NIPPLE STYROFOAVM 12 m BODY STYROFOAM 12 KGS 9 3084A1 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS FIXTURE SHOULD TAKE APPROXIMATELY 15 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED IOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT LADDER SCREWDRIVER ADJUSTABLE WRENCH WIRE 5 UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING LANTERN BODY LONG NIPPLE 2 CAPS AND TUBE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE MOUNTING HARDWARE PACKAGE MOUNTING PLATE 4 MOUNTING SCREWS 2 8 32 1 1 4 SCREWS AND 3 WIRE CONNECTORS FLUSHMOUNT ASSEMBLY 1 REMOVE ROOF FROM THE LANTERN CAGE BY UNSCREWING TWO FINIALS 2 INSTALL 100 MAX MEDIUM BASE TYPE BULB NOT INCLUDED INTO THE SOCKET 3 SECURE THE ROOF TO THE LANTERN CAGE WITH TWO RUBBER WASHERS AND TWO FINIALS REMOVED ABOVE INAL 2 PCS RUBBER WASHER 2 PCS ASSEMBLY 1 REMOVE ROOF FROM THE LANTERN CAGE BY UNSCREWING TWO FINIALS 2 REMOVE METAL WASHER AND CANOPY FROM THE ROOF BY UNSCREWING NUT 3 REMOVE NIPPLE FROM THE ROOF BY UNSCREWING THE NIPPLE FINAL 2 PCS WASHE 2 PCS ANTERN CAGE 10 2013 4 PLACE CAP ONTO THE ROOF THEN SCREW
Download Pdf Manuals
Related Search