Kenroy Home 32570WBZ Installation Guide
Contents
1. INSERTED INTO THE INPUT JACK 4 IF THE LED LIGHT STILL DOES NOT WORK PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE OPTIONAL TRANSFORMER 15 NOT DESIRED PLEASE SEE INSTUCTIONS AS BELOW 1 ALTHOUGH THERE MAY BE SOME INITIAL CHARGE IN BATTERIES WE RECOMMEND FULLY CHARGING IT BEFORE FIRST USE TURN OFF THE LED LIGHT AND LEAVE THE SOLAR DISC IM GOOD SUNLIGHT FOR 22 HOUFRS TO ENSURE THE BATTERIES ARE FULLY CHARGED THE OTHER OPTION IS USE THE TRANSFORMER TO CHARGE THE BATTERIES FOR 4 HOURS BEFORE FIRST USE 2 THE FULL RUN TIME OF THE LED LIGHT IS 6 HOURS WHEN THE BATTERIES ARE FULLY CHARGED 3 TO GET BEST PERFORMANCE FROM THE SOLAR DISC IN THE SUNSHINE PLEASE MAKE SURE THAT YOU PERIODICALLY CLEAN THE TOP SURFACE OF THE SOLAR DISC DO NOT USE A CHEMICAL SOLVENT 4 TURN ON THE LED LIGHT AT SWITCH YOUR LAMP IS READY FOR USE 5 IF YOUR LED LIGHT DOES NOT WORK CHECK THE SOLAR DISC IS RECEIVING SUNLIGHT DIRECTLY AND NOT IN SHADOW 6 IF THE LED LIGHT STILL DOES PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE CLEANING THE SHADE WASH THE SHADE WITH A SOFT BRUSH AND MILD DETERGENT SUCH AS DISHWASHING SOAP AND THEN THOROUGHLY RINSED INFORMATIONS RECHARGABLE BATTARIES BECOME LESS EFFICIENT WITH REPEATED CHARGE AND DISCHARGE CYCLES THE OF THE MAY REDUCE OVER TIME IF YOU FIND THE BATTERIES APPEAR LESS EFFICIENT TRY BOOST CHAR2. GE DO THIS TURN OFF THE LED LIGHT USE THE TRANSFORMER TO CHARGE THE BATTERIES FOR 4 HOURS WE RECOMMEND THAT YOU DO THIS OCCASIONALLY TO HELP PROLONG THE LIFE OF IF YOUR BATTERIES 5IIIL 0065 WORK WELL AFTER THIS BOOST CHARGE YOU SHOULD REPLACE THE BATTERIES AFTER THE BATTERIES USED FOR 12 18 MONTHS IT MAY HAVE REACHED IT S SERVICE LIFE YOU SHOULD REPLACE THE 32570WBZ INSTRUCTIONS
3. MODEL 5257 0 SOLAR DISC TRANSFORMER III 12 5 BODY AND 5 12 5 3 PCS SOLAR DISC SOLARDISCPORT 1 EO PART SOLAR DISC HOLDER 32570SHWBZ REPLACEMENT PART TRANSFORMER OLARDISCTRANS CONNECTOR REPLACEMENT PART OWER CORD AVAILABLE PARTS ARE 32570SHWBZ SHADE SOLARDISCPORT SOLAR DISC SOLARDISCBATT TWO BATTERIES SOLARDISCTRANS TRANSFORMER 05 2014 ASSEMBLY 5 READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS SHOULD APPROXIMATELY 5 MINUTES ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE THE FOLLOWING PARTS IN THE PACKAGE SOLAR DISC SHADE FINIAL LAMP BODY AND TRANSFORMER TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 PLACE THE SHADE ON TOP OF THE LAMP BODY AND SECURE WITH THE FINIAL 2 PLACE THE SOLAR DISC INTO THE SOLAR DISC HOLDER IF OPTIONAL TRANSFORMER IS BEING USED PLEASE SEE INSTUCTIONS AS BELOW 1 INSERT THE CONNECTOR INTO THE INPUT JACK OF THE SOLAR DISC 2 PLUG THE TRANSFORMER INTO A SOCKET AND TURN ON AT SWITCH YOUR LAMP IS READY FOR USE 3 IF YOUR LED LIGHT DOES NOT WORK CHECK THE CONNECTOR IS
Download Pdf Manuals
Related Search