Minka Lavery 5470-562 Instructions / Assembly
Contents
1. ction box Supply Ground Wire screws 2 Junction Box Box screw m a fi i Fixture wire be j Supply wire Mounting screw i Fixture Ground Wire Fig 2 FIXTURE a FIXTURE g FIXTURE g WIRES fr WIRES i WIRES tm Black or FNL White or Vi Bare BA smooth a Ribbed ae Copper oo HOUSE HOUSE Cround HOUSE WIRES WIRES WIRES Black White Green or Neutral Bare Copper iround WIRING Fig 2 1 Connect the electrical wires as follows Connect the black wire from the fixture to the black house hot wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it Otherwise attach the bare copper fixture wire to the green ground screw Size 8 32 3 8 L on the mounting plate 2 Tuck the wire connections neatly mto the wall junction box american fighting association2. l a nh fan Es INSTALLATION INSTRUCTIONS FOR 5470 562 For Wall Mount Fixture WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER _ AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR MOUNTING THE FIXTURE INSTALLATLON Fig 1 Shut off the power at the fuse box or circuit breaker If necessary remove the old fixture including the mounting hardware Carefully unpack the new fixture and lay all the pants on a clear area Take care not to lose any parts necessary for installation Thread the two mounting screws about 1 4 into the pre drilled holes in the mounting plate spaced about the same distance apart as the holes in the fixture back plate Attach the mounting plate to the junetion hox usine two junction box screws Size 8 32 1 L The side of the mounting plate marked GND must face out Guide fixture wires through hole m center of mounting plate Follow wiring instructions carefully see fig 2 Mount fixture by aliening mounting holes in fixture back plate with mounting screws and threading ball nuts E onto mounting screws Install the hght bulb not melded in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Place the arm B and the glass C onto the hixture body D ahgnng the hole and then lock it securely with the screw A Set A A 020 Mounting plate Ground screw 7 Jun
Download Pdf Manuals
Related Search