Hampton Bay 25722-HBU Instructions / Assembly
Contents
1. of an accident misuse abuse negligence alteration faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Contact Customer Care at 1 855 HD HAMPTON or visit www hamptonbay com Pre Installation PLANNING INSTALLATION Read all instructions before assembly and installation To avoid damaging this product assemble it on a soft non abrasive surface such as carpet or cardboard Inspect each part for defects that may have occurred during shipping Keep your receipt and these instructions for proof of purchase TOOLS REQUIRED CAT Safety goggles Wire strippers Wire cutters Ladder HARDWARE INCLUDED A NOTE Hardware not shown to actual size Quantity Socket ring Socket ring tool BB CC FF Part AA BB ce DD Mountingscrew EE OO FF GG HH 3 HAMPTONBAY COM Please contact 1 855 HD HAMP2. COM Please contact 1 855 HD HAMPTON for further assistance Installation continued 4 Installing the glass shade D Installing the bulb O Remove the socket ring FF from the socket of O Install a 60W max G9 bulb GG included to the fixture body A by hand the socket of the fixture body A O Place the glass shade B on the socket Secure with the socket ring FF by using the socket ring tool HH Do not overtighten Care and Cleaning O Clean the light fixture carefully with a soft dry cloth Do not use any cleaners with chemicals solvents or harsh abrasives Troubleshooting Problem Possible Cause Solution O The bulb will not light O The bulb is burned out O Replace the light bulb The power is off O al that the power supply is turned a i O Ensure that the circuit breaker is set to O The circuit breaker is off the ON position O The fuse blows or the circuit o There are too many items on O Unplug the other items on the circuit breaker trips when the light one circuit A is turned on o Contact a qualified electrician or call the Customer Service Team at 1 855 HD HAMPTON 7 HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM Retain
3. Item 1000 031 349 Model 25722 HBU USE AND CARE GUIDE OLIVET SCONCE Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this wall sconce We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Hampton Bay Table of Contents Table of Contents ccssssssscssseessssessees 2 Hardware Included n 3 Safety InformatioN srrrrriiine 2 Package Contents 4 A PA 2 ANSTAN AU OM cinc 5 Pre Installation ccccsssssessesssssecseesssssees 3 Care amp ClEeaning ii 7 Planning Installation cssseccssseeeseee 3 Troubleshooting rin 7 Tools REQUIFEd ssrrrrrrrerrerian 3 Safety Information O Read all instructions before assembling and CAUTION Before starting installation of this fixture or installi removal of a previous fixture disconnect the power by turning installing off the circuit breaker or by removing the fuse at the fuse box Consult a qualified electrician for installation of this fixture IMPORTANT Do not install t
4. TON for further assistance Pre Installation continued PACKAGE CONTENTS Installation 1 Installing the universal crossbar 2 Making the electrical connections N WARNING Turn off power at the main fuse box push all excess wires and connections back into the junction box not included j NOTE Always use the wire nuts AA to connect wires and O Carefully unpack the fixture Lay out all the O Fasten the open end of the ground wire bare parts on a clean surface copper or green wire to the ground wire from O Unscrew the mounting screws DD from the the junction box or the ground screw CC on fixture body A and remove the universal the universal crossbar EE crossbar EE Secure the universal crossbar a Connect the black wire of the power supply to EE to the outlet box not included with the the black wire of the fixture and connect the outlet box screws BB white wire of the power supply to the white wire of the fixture xP EA gt AA A A A AA A A d WHITE WIRE M WHITE WIRE I I I I FROM HOUSE FROM FIXTURE I I BLACK WIRE BLACK WIRE FROM HOUSE FROM FIXTURE I I i GROUND WIRE GROUND WIRE S FROM HOUSE FROM CANOPY M E eB E EEEE Be ee 2 _ 3 Installing the fixture body O Attach the fixture body A to the universal crossbar EE and secure it with the supplied mounting screws DD 9 HAMPTONBAY
5. his lighting system in a wet location If you have any non electrical questions about this fixture please contact our Customer Service Team IMPORTANT ea the bd pedata for any cuts E abrasions or exposed copper that nave occurred during at 1 855 HD HAMPTON or visit shipping If there is a defect in the wire do not continue the assembly process Please call our Customer Service Team at www hamptonbay com 1 855 HD HAMPTON Please reference your SKU 1000 031 349 or UPC 773546247269 Keep your receipt and these instructions for proof of purchase Warranty LIMITED WARRANTY WHAT IS COVERED The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the product has not been damaged through misuse abuse accident modification alteration neglect or mishandling WHAT IS NOT COVERED This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result
6. this manual for future use
Download Pdf Manuals
Related Search