Minka Lavery 1570-477 Installation Guide
Contents
1. Junction Box OA Nin UR Xe supply wire Fixture Grounding Ground Wire screw Fig2 Pe MIN 90 C SUPPLY CONDUCTORS FIXTURE FIXTURE FIXTURE WIRES WIRES WIRES Black or White or Bare Smooth Ribbed Copper HOUSE Ground HOUSE american WIRES WIRES fighting White Green or Neutral Bare Copper Ground Listed assoc Tati On2. INSTALLATION INSTRUCTIONS OR 1570 477 For Wall Mount Fixture WARNING SHUT TAER SEE AT FUSE OR CIRCUIT PREPARERS MOUNTING THE FIXTURE Installation see fig 1 Wiring see fig 2 I Shut off the power at the circuit breaker and remove old fixture 1 Connect the electrical wires as follows Connect the including the crossbar black wire from the fixture to the black house hot 2 Thread the nipple part way into the center hole of the crossbar and Wire Connect the white wire from the fixture to the secure with hex nut white neutral house wire Make sure all wire nuts are 3 Attach the crossbar to the junction box using two junction box secured You may wrap the connections with clectrical screws The side of the crossbar marked GND must face oui tape If your outlet box has a ground wire green or bare 4 Follow wiring instructions carefully see fig 2 copper connect fixture s ground wire to it Otherwise 5 Place the fixture body A over the nipple then tighten it with the attach the bare copper fixture wire to the green ground cap nut B screw onthe crossbar 6 Place the glass shade C into the fixture body A 2 Tuck the wire connections neatly into the wall junction 7 Install the light bulbs in accordance with the fixture s box specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Fig 1 C Supply Threaded Cross Hex Box Ground Wire Nipple bar nut screw Fixture wire DY
Download Pdf Manuals
Related Search