Minka Lavery 4173-249 Instructions / Assembly
Contents
1. has a ground wire green or bare copper connect fixture s ground wire to it Otherwise connect fixture s ground wire directly to the mounting bar A using the green screw provided 13 Tuck these wire connections neatly into the ceiling junction box and then raise the canopy F all the way to the ceiling Raise the screw collar ring G and thread onto ceiling loop H protruding through canopy F Fig 1 14 Place the diffuser O into the big frame Q then place the small steel sheet P of the big frame Q onto the diffuser O 15 Place the hook M of the decorate frame R onto the loop N then the loop L of the decorate frame R onto The hook K 16 Install the proper light bulbs for your fixture DO NOT EXCEED THE SPECIFIED WATTAGE Return the power to the junction box and test the fixture Your installation is now complete FIGs Ea K Ko FIXTURE FIXTURE FIXTURE IRE WIRES WIRES Smooth Ribbed Green or Bare Copper Ground HOUSE HOUSE WIRES WIRES White Neutral I Green Bare Copper Ground T american lighting association Notice It is important to use proper chain pliers not included k To OPEN and CLOSE the chain included with this fixture Do not meal open them with other tools that may twist or stress the chain LISTED links Itis important to use proper chain pliers like the ones shown in the diagram2. INSTALLATION INSTRUCTION FOR 4173 249 READ AND SAVE THESE INSTRUCTIONS ASSEMBLING THE FIXTURE Fig 2 1 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration HANGING THE FIXTURE Fig 1 2 Shut off the power at the circuit breaker and remove old fixture from ceiling including the mounting bar 3 Thread the nipple E into the ceiling loop H until snug 4 Thread hex nut D onto nipple E Place lock washer C over end of nipple E 5 Thread other end of nipple E with loop attached into mounting bar A until snug 6 Take this mounting bar A assembly and mount to ceiling junction box with junction box screws B Tighten screws securely with screwdriver 7 Using proper chain pliers open one link of chain 1 and connect it to the fixture loop J 8 By measuring determine connect number of links needed for proper hanging height 9 Lace the fixture wires through the chain links Slip screw collar ring G over the chain then do the same with the canopy F 10 Open one link of the other end of the chain I and connect it to the ceiling loop H 11 Feed the fixture wires through the ceiling loop H and nipple E and pull until taut CONNECTING THE WIRES Fig 3 12 At this point connect the electrical wires as shown in Fig 3 making sure all wire nuts are secured You may have to wrap the connections with electrical tape If your outlet
Download Pdf Manuals
Related Search