Minka Lavery 4137-84 Instructions / Assembly
Contents
1. E MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Note Press spring coupling E by hand and adjust to the desired length of steel wire F Fig 2 Your installation is now complete Return the power i to the junction box and test the fixture T gt FIXTURE FIXTURE WIRES 1 WIRES Black i a E en a FIXTURE WIRES Green or Bare p Ground HOUSE WIRES i 1 1 1 1 or Smooth 1 Ribbed 1 Copper 1 1 1 1 1 1 1 1 1 1 Neutral Green or 1 Neutral Bare Copper Ground american Che Sy US Tei ESTED association2. INSTALLATION INSTRUCTIONS FOR 4137 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR READ AND SAVE THESE INSTRUCTIONS PREPARATION Fig 1 1 Shut off the power at the fuse box or circuit Set A 021 193D breaker If necessary remove the old fixture an i Baa bracket including the mounting hardware G lenia a oN 2 Carefully remove the new fixture from the carton edunction box screws and check that all parts are included as shown in the illustration MOUNTING THE FIXTURE Fig 1 3 Raise the mounting bracket A to the junction box not provided then secure with the junction box screws B Size 8 32 0 6 L The side of the mounting bracket marked GND must face out CONNECTING THE WIRES Fig 2 4 At this point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the mounting bracket using the green screw provided After the wires are connected tuck them carefully inside the outlet box COMPLETING THE INSTALLATION 5 Raise the canopy C over the mounting bracket A and secure it with mounting screws D Size 8 32 0 5 L 6 Install the light bulbs Included in accordance with the fixture s specification DO NOT EXCEED TH
Download Pdf Manuals
Related Search