Minka Lavery 6101-84 Installation Guide
Contents
1. NG SHUT POWER OFF ERTISSEMENT COUPER LE COURANT A acute THE FIXTURE FIG 1 4 Shut off the power supply at the fuse box or circuit breaker If necessary remove the old fixture from wail including the mounting hardware 2 Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration Attach the mounting plate 1 tothe outlet box using the outlet box screws J The side of the mounting plate marked GND must face out 4 Follow the wiring instructions carefully See Fig 2 5 Attach the fixture wall plate over the mounting plate I by protruding the mounting screws through the mounting holes on the wall plate and securing with ball nut H tightly 6 Install the large glass shade F round check ring E small glass shade D cushion ring C over the socket G in order then secure with socket fing B using socket ring tool A 7 Install the bulb in accordance with fixture s specifications DO NOT EXCEED THE _ MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Lar karte egea delg i byl Is HRE E 1 Atthis point connect the Paaa wires as shown in Fig 2 making sure that ali wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the mounting strap using the2. green screw provided 2 Tuck the wire connections neatly into the wall outlet box Your installation is now complete Return powan to the juction box and test the fixture BOX A INCH N W 0 4 YES i ew Lab KGS INSTALLATION INSTRUCTION FOR FIXTURE 6104 172 Fue USI vox a iw ek use Se mo 4 Be GROUND HOUSE WIRES GREEN OR BARE COPPER GROUND X bo wots TYPA INSTALLATION INSTRUCTION FOR FIXTURE 6101 172 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR MOUNTING THE FIXTURE FIG 1 _ SOCKET RING SKT RING 26 4 Shut off the power supply at the fuse box or circuit breaker If necessary remove the old fixture from wall Including the mounting hardware 2 Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration 3 Attach the mounting plate I to the outlet box using the outlet box screws J The side of the mounting plate marked GND must face out Follow the wiring instructions carefully See Fig 2 Attach the fixture wall plate over the mounting plate I by protruding the mounting screws through the mounting holes on the wall plate and securing with ball nut H tightly 6 Install the large glass shade F round check ring E small glass shade D cushion ring C over the socket G in o
3. rder then secure with socket ring B using socket ring tool A 7 Install the bulb in accordance with fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE op CONNECTING THE WIRES FIG 2 1 Atthis point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to WHITE caEEN EE ARE the mounting strap using the green screw provided Gono 2 Tuck the wire connections neatly into the wall outlet box Your installation is now complete Return power to the Juction box and test the fixture american Elsie association
Download Pdf Manuals
Related Search