Filament Design CLI-MEN2183-07 Installation Guide
Contents
1. ASSEMBLING amp INSTALLATION INSTRUCTIONS PRODUCT 2183 2285 2385 2387 2167 2170 2174 OUTDOOR CEILING LIGHT FIXTURE WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBLING THE FIXTURE Fig 2 Fig 1 1 Put the candle sleeve B over the lamp holder 2 Install the light bulbs in accordance with the fixture specifications TRS NOTE DO NOT EXCEED THE SPECIFIED WATTAGE HANGING THE FIXTURE Fig 1 1 Shut off the power at the circuit breaker and remove old fixture from ceiling including the old single bar 2 Carefully unpack new fixture and lay all the parts on a clear surface 3 Thread nipple C into loop F until snug 4 Thread other end of nipple C with loop attached into single bar D until snug 5 Place lock washer B over end of nipple protruding through single bar and thread hex nut A onto nipple until tight 6 Take this single bar assembly and mount to ceiling junction box with junction box screws E Tighten screws securely with screwdriver 7 Using proper chain pliers to open one end link of the chain j Chain provided and connect to the fixture loop 1 Close the link 8 By measuring determine correct number of links needed for proper hanging height Using proper chain pliers disconnect and discard remaining chain I 9 Lace the fixture wires through the chain 10 Slip loop collar H over the chain then do the same with the canopy G 11 Open the other end link of the chain and ha2. ng the fixture on the loop at the ceiling Close the link Fig 2 12 Feed the fixture wires through the loop F and nipple C and pull until taut 13 Slide canopy G up flush to ceiling secure using loop collar H A CONNECTING THE WIRES Fig 3 l Take the black wire from the ceiling junction box and the smooth wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug JI cwe oO 2 Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wires together in the same direction you twist the wire connector onto wires B 3 If your junction box has a grounding wire green or bare copper attach this wire and the bare copper wire from the fixture together as step If junction box has no ground wire attach the bare copper fixture wire to the green ground screw on the single bar 4 Tuck these wire connections neatly into the ceiling outlet box and then raise the canopy G all the way to the ceiling Raise the loop H and thread onto ceiling loop protruding through canopy Your installation is now complete Return power to the junction box and test the fixture Fig 3 FIXTURE FIXTURE FIXTURE WIRES WIRES WIRES Black or White or Bare Smooth Ribbed Copper HOUSE HOUSE Ground HOUSE WIRES WIRES WIRES Black White Green or Hot Neutral Bare Copper Ground
Download Pdf Manuals
Related Search