Hampton Bay ES0746BN Installation Guide
Contents
1. Pendant Light Instruction Manual Please read carefully and save these instructions as you may need them ata later date SAFETY WARNING BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK NOTE The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur It must be understood that common sense caution and care are factors which cannot be built into any product These factors must be supplied by the person s installing this unit READ amp SAVE THESE INSTRUCTIONS CAUTION Before assembling the lighting fixture refer to the section titled Wiring Connections If you feel you do not have enough electrical wiring experience either refer to a do it yourself wiring handbook or have your lighting fixture installed by a qualified licensed electrician UNPACK THE PACKAGE Check the contents to be sure everything is included Tools Needed Slotted screwdriver Adjustable wrench Step ladder Wire cutters wiring supplies as required by electrical code INSTALLATION amp OPERATION INSTRUCTIONS GENERAL Before starting the installation disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box Turning the power off using the light switch is not suff2. ack wire s from the fixture to the black wire of the supply circuit Connect the green or bare copper wire to the ground wire of the supply circuit Use UL CSA listed wire connectors suitable for the size type and number of conductors No loose strands or loose wires should be present Secure wire connectors with UL CSA listed electrical tape Junction box Wire connector Ground wire Mounting Plate Ground screw Fixture Wire Mounting Screw Machine Screw O o Nn NN BPW YN Hexagonal Screw 10 Canopy 11 Finial 12 Tube A 13 Tube B 14 Socket 15 Shade 16 Socket Ring 17 Bulb
3. icient to prevent electrical shock All electrical connections must be in accordance with local and National Electrical Code NEC standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting packages from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions Be sure to read these installation instructions and review the diagrams thoroughly before installation Assembly and Installation 1 Screw Tube B 13 into Tube A 12 until secure 2 Make sure all the electrical is power off and then attach the mounting plate 4 to the junction box 1 with the provided machine screws 8 3 Attach the ground wire 3 under and around the ground screw 5 marked GND and tighten the ground screw 5 to the ground wire 3 until secure Connect black smooth fixture wire to black supply wire and white ribbed fixture wire to the white supply wire using wire connectors 2 provided 4 Place the canopy 9 to cover into the 2 mounting screws 7 and attach to ceiling by tightening the Finials 11 5 Place the shade 15 onto the socket 14 and secure by tightening the socket ring 16 6 Install bulb 17 into the socket 14 ELECTRICAL CONNECTIONS Required Supply Circuit 120V 60Hz Connect the white wire s from the fixture to the white wire of the supply circuit Connect the bl
Download Pdf Manuals
Related Search