Sea Gull Lighting 82131-12 Installation Guide
Contents
1. Installation And Safety Instructions HC 1572 Sea Gull Lighting Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to this fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM 071409 IMPORTANT SAFETY INSTRUCTIONS CLEANING e Be sure the electricity to the system you are working on is turned To clean wipe fixture with a soft cloth Clean glass with a mild soap off either the fuse removed or the circuit breaker set at off Do not use abrasive materials such as scouring pads or powders e Use of other manufacturers components will void warranty listing steel wool or abrasive paper and create a potential safety hazard e If you are unclear as to how to proceed contact a qualified electrician ORDERING PARTS e Do not install on a post or pole that results in a vertical rise of 25 feet or higher Keep this sheet for future reference and in case you need to order e You don t need special tools to install this fixture replacement parts Parts for this fixture can be ordered from place e Be sure to follow the steps in the order given of purchase Be sure to use exact wording from illustration when e Proper wiring is essential for the safe operation of this fixture ordering parts e To reduce the risk of fire electric shock or personal injury mount to a system able to support the weight of the fixture e Read instructions carefully e Save th2. ese instructions NOTE THIS GLASS IS HANDCRAFTED THE SLIGHT IMPERFECTIONS IN THE GLASS ADD TO THE AUTHENTICITY OF THE FIXTURE INSTALLATION STEP 1 A Use a listed wire connector to connect the fixture hot wire black wire or round and smooth tracer to the supply hot wire B Use a listed wire connector to connect the fixture common wire white wire or square and rigid to the supply common wire C Gently try to remove the wires from the connector If you can remove the wires carefully re do the wiring connection lt rma A HOOD B STEP 2 GROUNDING INSTRUCTIONS Connect the ground wire from the fixture bare metal or green insulated wire to the ground wire from the power supply bare metal or green insulated wire using a small wire connector not supplied NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES Slide fitter E onto post Secure in place using three supplied fitter screws A RETAINING SCREWS D CAGE C FINAL ASSEMBLY Make sure no bare wires can be seen outside wire connectors STEP 1 Install lamp not supplied into socket STEP 2 FITTER E Place hood B on top of cage C Use retaining screws D to secure STEP 3 Thread finial F to top of hood B FITTER SCREWS A FIGURE 1
Download Pdf Manuals
Related Search