Home

Minka Lavery 687-14 Installation Guide

1. 1 INSTALLATION INSTRUCTION SF 2 ire A MRR BPs od ae x Ne ae bere ae Na gt a ta Shut off power at the fuse box or circuit breaker box Remove the old fixture from ceiling including the crossbar Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation Thread the two Studs about 1 4 into the pre drilled holes in the Crossbar spaced the same distance apart as the holes in the Canopy Attach the Crossbar to the Outlet Box using the two Screws from the Outlet Box The side of the Crossbar marked GND must face out While holding the Light Cluster assembly towards the ceiling connect the electrical wires as follows A Connect the black wire from the fixture to the black house hot wire B Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet has a ground wire green or bare copper connect fixture s ground wire to it Otherwise connect fixture s wire directly to the crossbar using the green screw provided Tuck the wire connection neatly into the ceiling junction box Finish mounting the fixture by placing the Canopy over both Studs and secure the Light Cluster assembly against ceiling with Knurled Knobs Install the light bulbs in accordance with the fixture s specifications DO NOT EXCE
2. ED THE MAXIMUM WATTAGE RATING Install Glass Shade by placing glass over the Center Pipe so that it protrudes through the center hole of glass While holding the Glass shade slide Bottom Cap over Center Pipe and tighten with Finial NOTE You may have to adjust the threaded washer and hex nut so that the glass shade be sandwiched firmly in between threaded washer an dcfinial Your installation is now complete Return power to the junction box and test the fixture For Semi Flush Mount Ceiling Fixtures Junction Box Ceiling STUD GREEN SCREW GND Ig lt JUNCTION BOX SCREW lt CANOPY CENTER PIPE ___ 7 HEX NUT THREADED WASHER GLASS _ SHADE C e gt BOTTOM gt GED 3 CLES CAP FINAL _ gt T FIXTURE 1 WIRES Green or 1 Bare Copper Ground WIRES i Green or Neutral Bate Copper Ground MIN 90 C SUPPLY CONDUCTORS CAUTION RISK OF FIRE CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR ES lighting association

Minka Lavery 687-14 Installation Guide

Contents

Download Pdf Manuals

Related Search

Related Contents