Sea Gull Lighting 94883-71 Installation Guide
Contents
1. NUT amp LOCKWASHER R COLLAR C gt FIGURE 2 NOT INCLUDED FOR MONO POINT INSTALLATION Fig 2 LR 158 1 2 3 Remove rail adapter Q by cutting wire below rail adapter Q Slide collar C canopy B nut and lockwasher R mounting bar A and nipple D over wire Install strain relief O Tighten strain relief set screw with a flat head screw driver Attach mounting bar A to outlet box using outlet box screws not supplied Make electrical connections using wire nuts of other UL listed device a House Black to Fixture Black b House White to Fixture White Take house ground wire and fixture ground wire and wrap around the green grounding screw located on the mounting bar A Secure by tightening the green grounding screw Make sure no wires are left exposed and carefully tuck wires into outlet box Raise canopy B to cover outlet box and thread collar C to nipple D in order to secure ATTACH PENDANT TO RAIL Fig 3 1 2 Unthread cap I from rail adapter Q Making sure contacts G will align with conductors H on rail set the bottom of the rail adapter Q to the bottom of the rail and roll rail adapter Q up onto the rail Close hinged door of rail adapter Q up onto rail Thread cap l back onto rail adapter Q RAIL INSTALLATION INCORRECT CONTACTS G CORRECT CONTACTS G CAP A I FIGURE 3 CONDUCTOR H CON2. DUCTOR H
3. Installation And Safety Instructions LR 158 Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to this AMBIANCE e Be sure the electricity to the system you are working on is turned off either the fuse removed or the circuit breaker set at off e Use of other manufacturers components will void warranty listing and create a potential safety hazard e For use with the 120V Transitions track series by Sea Gull Lighting e Caution To reduce the risk of burn during relamping remove from the track before relamping e Minimum distance from the front of the lamp to combustible surfaces is 8 e Make sure all connections are tight e Dimming halogen lamps greatly reduces lamp life e To reduce the risk of FIRE or INJURY TO PERSONS Turn off and allow to cool before replacing lamp e Lamp gets HOT quickly Contact switch only when turning on e Do not touch hot lens guard or enclosure e Keep lamp away from materials that may burn e Do not touch the lamp at any time Use a soft cloth Oil from skin may damage lamp e Do not operate the luminaire fitting with a missing or damaged shield e Save these instructions NOTE This pendant can be hung either from a Transitions Series rail not supplied or from the supplied canopy Follow the instructions for the appropriate mounting method ASSEMBLING PENDANT SHORTENING PENDANT Fig 1 1 Determine length of pendan
4. t and shorten cable Be sure to add 5 for electrical connections when installing as a mono point 2 Unthread splice compartment F Remove wiring connections and unthread top portion of splice compartment F from pendant 3 Set strain relief collar and top of splice compartment at desired location on cut cable NOTE Strain relief collar is threaded and should be threaded up and down cable Be sure 1 4 of cable jacket is protruding out of strain relief collar Secure in place by tightening the two set screws 4 Make connections between socket leads and pendant cable using wire nuts inside the splice compartment F Black to Black White to White Ground to Ground Make sure no wires are left exposed and carefully tuck wire nuts into bottom half of splice compartment F 5 Close splice compartment F by threading the two halves together 6 Place glass T around socket and secure by threading retaining ring J around socket 7 Install supplied GU10 120v 50w Halogen lamp into socket Do not use a lamp rated for more than 50w 8 Thread finial E to bottom of fixture fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM 041709 IMPORTANT SAFETY INSTRUCTIONS RETAINING RING J FIGURE 1 NOT INCLUDED GROUNDING AND MOUNTING BAR LOCK UP FOR OPTIONAL MONO POINT CANOPY WIRE CONNECTORS I lt _ QUTLET BOX SCREWS GROUND WIRE STRAIN RELIEF 0 MOUNTING NIPPLE D ER
Download Pdf Manuals
Related Search