Victor 0645 Instructions / Assembly
Contents
1. Victor Plunger Style Mole Traps Instructions T ie 4 Push trap down until spears have bottomed out NOTE Safety pin should be reinserted whenever sprung mole traps are removed from ground o Set amp Place the Mole Traps Make a depression in the roof of the main tunnel by Center the trap on the tunnel with the trap pan Preset spear holes by plunging spears up and down Before setting the trap make sure the firing latch is Holding the trap frame in place rapidly pull upward Trap is set If necessary apply slight downward Trap has fired Remove mole fictor To identify active mole tunnels flatten out all tunnels Wait 24 hours Tunnels that resurface are most likely the active tunnels Set traps in these locations pressing down with your thumb directly over the depression you ve made with your thumb they travel easily to the bottom on their own OUTSIDE the pan handle until the firing latch snaps over the pan T handle down until latch catches to ensure pan is fitting IN the thumb depression is contacting the roof of the tunnel
Download Pdf Manuals
Related Search