Alpine DIG100XS Instructions / Assembly
Contents
1. Inadequate care and or neglect Environmental and or natural elements Immersion in water unless specified Improper Installation Storage and or Maintenance aes ond haa This warranty is void if the product has been damaged by accident misuse negligence improper installation and or modifications have occurred This includes any and or all defects arising out of freezing water damage hard water damage failure to keep the unit clean and free of harmful additives such as bleach chlorine etc which affects the paint and or parts This warranty also does not cover any additional charges or installation removal disposal and or shipping costs or consequential damage associated with any warranty claim Alpine CORPORATION Assembling amp Using Your Product Unpack all components carefully Please check to ensure all parts have been removed from the packaging Some splashing may occur Components Fountain Pump LED Lights Back cover Transformer R Assembling Place the fountain on a flat surface Connect the vinyl tubing to the pump adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled Connect the light cables together to the pump Slide the back cover in place Connect the pump cord to the transformer Gently pour water into the fountain being careful not to overflow and cause splashing Make sure the water completely submerges the pump and the water flows sm2. be touched up using standard paint The paint is designed to protect the entire finish against breakdown of color As with any product all finishes with time will gradually fade and discolor The warranty will only cover against severe or complete fading within the first year from date of purchase with the above exclusion e Procedure Service Should a warranty claim be needed you should contact the retailer from whom you purchased the product If that is not an option you can contact Alpine Corporation at www alpine4u com When contacting Alpine Corporation you must be prepared to show proof of purchase provide photographs and any other information needed to validate your claim This may be necessary to distinguish between a partial or complete replacement of a defective product The warranty does not cover any items with multiple parts the warranty will ONLY cover the individual component of the unit item that may be defective Replacement parts can be made available to a consumer through the original selling party or an approved parts retailer If this is not an option contact our customer service department Item is covered under one year limited warranty from the date of purchase When requesting replacement parts due to a warranty claim after 30 days of purchase credit card information will be requested for shipping charges e Not Covered Under Warranty The limited warranty will NOT cover cases of damages due to Damages caused in Transit
3. Limited Warranty Information Thank you for choosing an Alpine product We aim to please with our wide range of products including Fountains Birdbaths Statuary Pond Supplies amp More All of our products are constructed from the highest quality materials In the event that we have not achieved our usual standard of excellence we will repair or replace at our discretion within the warranty period A valid proof of purchase with the purchase date clearly indicated must be provided Photos of defective merchandise will also be required to help distinguish the actual cause of the defect Please read below for a detailed description of warranty coverage Alpine CORPORATION e Water Damage Alpine products are not manufactured to withstand extreme temperatures Improper storage that allows water to freeze within a product may cause damage and is considered D l G 1 OOXS negligence and will therefore not be covered under this warranty The use of hard water and or caustic cleaners can affect the paint or other finishes Failure to keep the unit clean a 7 and use of such additives cleaners will also void the warranty Please note for fountains Ab T t J F th it is normal for some splashing to occur and protecting the immediate surfaces is not the S rac a r O u n al n WI responsibility of Alpine Corporation e Paint amp Color Retention and or Loss LED Lig hts The use of water will cause natural erosion to the color This area can
4. cavity with clean water If breakage or damage is found contact your local retailer for part Fountain Care We recommend to use Alpine s all natural cleansing formula to eliminate foam lime scale and calcium buildup fight mineral deposits leave water crystal clear help prevent staining remove organic contaminants and treat discolored water This formula will help prevent pump damage due to hard water build up i For small sized fountains holding water up to 7liters of water we recommend Alpine Item PPL100 li For larger sized fountains holding water over 7liters of water we recommend Alpine Item PPL102 iii For more information please visit www alpine4u com Caution O Always unplug the pump from the electrical outlet before cleaning amp handling Uses with clean water only do not place the fountain and or parts in any other liquid Periodically change water amp clean the pump to keep free from micro organisms Disconnect and store the unit in a dry place if not in use for an extended period of time Do not operate with water above 90 F or 30 C Do not lift carry or pull the pump by the power cord Do not exceed the maximum voltage amp wattage on transformer NEVER LET THE PUMP RUN DRY
5. oothly during operation Plug the transformer into your local power supply make sure that there is no water around the plug amp always keep the power source in a dry place O NOTE We recommend that you use distilled water to prevent scale build up The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly Troubleshooting amp Caution If you have any questions and or problems please contact the retail store you purchased this fountain from If your pump fails to run Check the circuit breaker or try a different outlet to make sure the pump is receiving electrical power Check the pump discharge and tubing for any kinks and or obstructions Any buildup obstructing the water flow can be flushed with a garden hose Check the rotor by removing the front cover amp plate to access the impellor area Turn the rotor and make sure that the rotor is not jammed or broken If your pump spews Check the water level to make sure the pump is completely submerged and there if enough water in the basin to operate your fountain Not having enough water will cause your pump to spew If your pump is making abnormal loud noises Disconnect the pump from the electrical power supply and remove the front cover amp plate Carefully grip the impeller and gently pull the impeller rotor assembly out of the pump housing Rinse the impeller rotor assembly and clean the
Download Pdf Manuals
Related Search