Kingston Brass HKUF3321108DBN Installation Guide
Contents
1. STEP 3 Recommended for professional installers only Set the sink Set the sink into the cabinet cutout seal if necessary around the cabinet front Instructions continued on back panel STEP 4 Recommended for professional installers only Install the countertop Finish the inside of the sink cutout on the top according to the recommendations of the countertop material supplier Clean the bottom of the countertop and the top flange or lip of the sink with denatured alcohol Then apply a narrow bead of silicone adhesive sealant to the edge of E emi poi an m www kingstonbrass com ace the countertop on the sink i a ATTO Remove excess sealant from the inside lip of the bowl using a cleaner TOLL FREE CUSTOMER SERVICE 877 2 KBRASS recommended By the sealant supplier TECHNICAL SUPPORT E mail service kingstonbrass com 12715 Reservoir Street Chino CA91 710 2012 04 L Kingston Brass KINGSTON BRASS INSTALLATION INSTRUCTIONS UNDERMOUNT SINKS These instructions are for installing Kingston Brass stainless farmhouse style undermount sinks If you are installing another type of sink such as a standard undermount drop in sink Please refer to instructions specifically for those sinks Templates are supplied only as a guide The physical use of the sink will ensure a more accurate cutout These installation instructions are for solid surface countertop materials For information on installations in granite marble sto2. filler strips or sanding the opening Kingston Brass stainless steel farmhouse style undermount sinks are designed so that the apron sits forward approximately 1 out from the face of the cabinet STEP 2 Recommended for professional installers only Make a template and cutouts Kingston Brass recommends that our farmhouse style undermount sinks be installed with a Positive Reveal with the countertop edge sitting approximately 1 8 back from the edge of the sink exposing the sink rim Use the sink itself as the template for the cutout on the countertop Center the sink draw around it with a pencil then make the cutout in the countertop Measure the location for the faucet and any accessories make the cutouts and install the faucets and accessories Install strainer and or garbage disposer
3. ne or butcher block countertops contact your fabricator For information on installation in ceramic tile countertops contact your tile contractor Note It is recommended that all countertops be cut by an approved or certified installer and that the sinks be installed by the installer whenever possible The countertop sink unit ideally should be installed as one on the jobsite Before installing the sink inspect it for damage Do not install a damaged unit Remember it is your responsibility to follow all local plumbing and codes STEP 1 Recommended for professional installers only Prepare the sink base cabinet Farmhouse sinks require a special sink base cabinet with a front cutout and a platform built in place to support the sink illustration A Build a plywood platform to support the weight of the sink and attachments The platform should be attached with braces to the sink cabinet allowing for the top of the sink to reach the bottom of the countertop material Be sure to allow space for water line supplies and drain hole garbage disposal clearance illustration B Fit the sink to the cabinet opening The opening in the front face of the sink base cabinet can be modified to fit the job site Be sure to have filler strips on site in case any adjustments need to be made in the depth or width of the sink base cabinet cutout Double check measurement of cabinet cutout and make any necessary adjustments by either adding
Download Pdf Manuals
Related Search