KOHLER K-9379-BN Installation Guide
Contents
1. KOHLER P TRIP LEVER INSTALLATION INSTRUCTIONS TOOLS AND MATERIALS REQUIRED e Phillips screwdriver TO REMOVE EXISTING TRIP LEVER 1 Remove tank cover 2 Loosen nut securing trip lever to tank by turning clockwise The nut has left hand threads NOTE In the following step use care to prevent dropping the nut into the vitreous tank If the nut falls below the water reservoir it is not accessible 3 Remove trip lever from tank while holding nut to prevent dropping it into tank TO INSTALL NEW TRIP LEVER 1 See Fig 1 From outside the tank insert trip lever arm through hole in tank sliding trip lever arm through the nut Trip Lever N Nut Bushing Z Trip Lever Arm Fig 1 2 See Fig 2 When seating the bushing against the outside of the tank position the trip lever arm below the plunger saat 1 16 Gap nw ty Plunger Nut Setscrew Bearing Surface Trip Lever Trip Lever Arm Fig 2 CAUTION Risk of product damage In the following step do not overtighten or breakage may occur 3 See Fig 2 Hand tighten the nut turning it counter clockwise The nut has left hand threads 4 See Fig 2 If necessary loosen the setscrew and re adjust the plunger nut until there is a 1 16 gap between the plunger nut and the plunger arm NOTE If no gap is provided the toilet will not shut off More then 1 16 gap may cause the flush to be too s2. hort 5 Replace tank cover 115962 2 AA Copyright 1997 Kohler Co
Download Pdf Manuals
Related Search