Knape & Vogt KT-0134-1212SN Installation Guide
Contents
1. Glass Corner Shelf Kit doka Sterling Corporation KT 0134 1212SN Installation Instructions Tools Required not included Installation Materials included 3 8 Drill 2 Shelf Grips 1 8 Drill Bit or 4 Screws 3 16 Drill Bit 4 Anchors Screwdriver 2 Steel Flakes Tape Measure 12x 12 x 1 4 Glass Corner Shelf Level INSTALLATION STEP 1 Loosen the adjusting screw on the Shelf Grip until the inner hole appears as shown in Figure 1 Repeat for the other Shelf Grip STEP 2 Measure the desired height for the corner shelf and then measure 6 from the corner where the two walls intersect in order to mark the locations of the screw holes as shown in Figure 2 NOTE If the screws are being driven directly into a stud pre drill the screw holes using a 1 8 drill bit as shown in Figure 3 Skip to STEP 3 NOTE If the screws are being driven into drywall and not into a stud drill the screw holes using a 3 16 drill bit and then insert the anchors into the holes as shown in Figure 4 STEP 3 Place the Steel Flake on the back of the Shelf Grip as shown in Figure 5 Grooves toward the Shelf Grip to prevent slipping STEP 4 Level the Shelf Grips and then secure them in position by driving the screws into the anchors or the stud as shown in Figure 6 STEP 5 Insert the Glass Shelf between the Shelf Grips and then tighten the adjusting screws as shown in Figure 7 6 15 2 cm 6 15 2 cm SF angie Fig2. ure 2 Height Height Figure 4 Figure 5 Figure 6 Figure 7 Figure 3 Figure 1
Download Pdf Manuals
Related Search