HDX EH-WSHDI-001 Instructions / Assembly
Contents
1. PACKAGE CONTENTS y Or S Zy ZZ SS Zy ZZ Zy ZZ BSS SS SS SS Zy SS ZZ ZZ SS ALTTO helfx6 B Tapered Sleeves x 48 Spare Plastic Tapered Sleeves x 2 C Bottom Poles with Levelers Pre installed x 4 Assembly 1 Assembling the posts Oo Screw a bottom pole C to top pole D Repeat for the o remaining bottom and top poles C and D KA Y Adding shelves and backstands Locate the desired position of the next lower shelf and o place the tapered sleeves B on the pole assemblies o Slide the shelf A down from the top pole assemblies and onto the tapered sleeves B Push down on each shelf A corner ensuring the shelf o A is in a fully locked position Repeat for the remaining shelves A Center the backstand F along the back of the shelf Insert the bent foot of one end anchor of the backstand F on the inside of the back shelf wire Once the bent foot is inside the back wire pull backstand F out away from the rack until the straight foot locks on the outside of the back wire Repeat for the 5 other backstands Bw SS SN aK A E J E L ANA Safety Information 1 Two adults are recommended for ease of assembly Use care when handing Assembly recommended on a soft surface such as carpet to avoid scratching flooring finish Discard the black circular plas2. all the way C CAUTION Do not allow children to climb or play in or around the shelves CAUTION Each shelf holds up to 500lbs evenly distributed Static load total 600lbs with casters Do not overload HOMEDEPOT COM Please contact 1 800 514 6729 for further assistance
3. tic pieces These are used to separate the shelves for shipping purposes Use and Care Guide Shelving Item 204603381 Model EH WSHDI 001 6 Tier Industrial Using 7 TILIA o DOD oor LN 2 D Top Poles with Pole Connector E Wheelx2 F backstandsx6 G Levelers x 4 amp Caps Pre installed x 4 Pre installed on the Bottom Poles C Wheel with lock x 2 Wrench x 1 Assembling the bottom shelf Locate the desired position of the bottom shelf A Ensure that it is no more than 6 in from the floor Place two tapered sleeves B into the appropriate groove on each pole assembly Ensure the tapered end is up see arrow on sleeve Place the shelf A on its side and slide each pole assembly with tapered locks through the bottom of the shelf A until snug After all pole assemblies are in place position the unit in the upright position Push down on each corner of the shelf A ensuring the shelf A is in a fully locked position f N Adjusting the levelers Move the assembly to the desired position If required adjust the levelers G on the bottom of the bottom poles C to ensure the assembly is level Rotate the levelers G counterclockwise to raise the poles clockwise to lower the poles If wheels are required un screw levelers G from bottom poles screw in two locking wheels E on one side of the unit and two regular wheels E on the other side of the unit Use the provided wrench to tighten
Download Pdf Manuals
Related Search