Martha Stewart Living 1363500410 Instructions / Assembly
Contents
1. DECORATORS COLLECTION BF 25067 NARROW OPEN 36Hx18Wx24D INV 13635 ASSEMBLY INSTRUCTIONS Made In China 1 10 Thank you purchasing this quality product sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST TOP PANEL 1PC BACK ADORNING PANEL 1PC FEET 4PCS 8 3 4 L 7mmx 7 8 SCREWS 4PCS SCREWS 4PCS 2 10 3 4 GECKOS 4PCS PLASTIC BELTS 2PCS SCREWS 4PCS gt 25 HOOKS 4PCS CAM BOLTS 12PCS CAM LOCKS 12PCS S 8mm 1 1 4 SCREWS 6PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 10 NOTE UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT TH2. The anti tip hardware must be used part of assembly 9 ASSEMBLE THE ATTACH 2 USING 4 SCREWS 0 THE 1 HOLES OF REAR PANEL 9 10 10 ASSEMBLE THE HARDWARE DRILL 4 HOLES INTO THE WALL PLEASE REFER TO THE REAR TOP PANEL S HOLES DISTANCE AND HEIGHT PUT 4 GECKOS M INTO HOLES IN THE WALL AND ROTATE 4 SCREWS L INTO THE GECKOS CONNECT THE TWO HOOKS P WITH A PLASTIC BELT N 10 10
3. E SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL ARROW 6 NOTE THE ARROWS THE HIDDEN CAM LOCKS SHOULD POINT THE CAM BOLTS 4 10 1 ASSEMBLE THE ACROSS 0 ROTATE 2 CAM BOLTS Q INTO THE HOLES RIGHT SIDE PLACE CAM BOLTS Q INTO THE HOLES IN THE ACROSS PANEL D AND ATTACH USING 2 CAM LOCKS R 2 ASSEMBLE THE BOTTOM PANEL E ROTATE 2 CAM BOLTS Q INTO THE HOLES IN THE RIGHT SIDE PLACE CAM BOLTS Q INTO THE HOLES IN THE BOTTOM PANEL E AND ATTACH USING 2 CAM LOCKS R 5 10 lt 0 Lu LLI 00 9 lt 4 ASSEMBLE THE 6 10 5 ASSEMBLE THE 1 ROTATE THE INTO THE HOLES THE SIDE 6 ASSEMBLE THE TOP PANEL A ROTATE 4 CAM BOLTS Q INTO THE HOLES IN THE TOP PANEL A PLACE CAM BOLTS Q INTO THE HOLES IN THE PANELS B C AND ATTACH USING 4 CAM LOCKS R 7 10 7 ASSEMBLE THE ATTACH THE FRONT ADORNING PANEL A B C USING 5 ASSEMBLE THE PANEL H ATTACH THE BACK ADORNING PANEL H TO PANEL A B C USING 3 SCREWS S 8 10
Download Pdf Manuals
Related Search