Martha Stewart Living 1914600910 Instructions / Assembly
Contents
1. 8 ASSEMBLE THE ANTI TIP HARDWARE e DRILL 4 HOLES INTO THE WALL PLEASE REFER TO THE REAR TOP PANEL S HOLE DISTANCE AND HEIGHT e PUT 4 GECKOS W INTO THE HOLES IN THE WALL AND ROTATE 4 SCREWS X INTO THE GECKOS W e CONNECT THE TWO HOOKS T WITH A PLASTIC BELT U 10 102. e ATTACH 1 FEMALE MAGNET Q TO DOOR E USING 1 SCREW R e ATTACH 2 HINGES L TO DOOR E USING 6 SCREWS M 6 10 ASSEMBLE THE MAGNET N ASSEMBLE THE DOOR 2 e ATTACH THE MAGNET TO TOP PANEL A USING 2 SCREWS 4 e ATTACH 1 KNOB J TO DOOR E USING 1 SCREW K 5 ASSEMBLE THE DOOR E e ATTACH THE DOOR E TO RIGHT SIDE PANEL C USING 6 SCREWS M 7 10 A Warning The anti tip hardware must be used as part of assembly 6 ASSEMBLE THE BACK PANEL AND HOOKS T ATTACH THE BACK PANEL USING 12 SCREWS I e ATTACH THE HOOKS TO PANEL A USING 4 SCREWS V 8 10 55 bb as bb bb KA 55 55 7 ASSEMBLE THE PLATES 0 e ATTACH THE PLATES 0 TO PANEL B C USING 8 SCREWS P 9 10
3. HOME DECORATORS COLLECTION BF 25171 MARTHA STEWART LIVING MUDROOM CABINET 15 Hx20 Wx13 D INV 19146 ASSEMBLY INSTRUCTIONS Made In China 1 10 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST A B C TOP PANEL 1PC LEFT SIDE PANEL 1PC RIGHT SIDE PANEL 1PC D E F BACK PANEL 1PC BOTTOM PANEL 1PC DOOR 1PC 7mm x 5 8 G H gal Lo SCREWS 14PCS CAM LOCKS 8PCS K 8mm x 5 8 gt SCREW 1PC HINGES 2PCS Bu CAM BOLTS 8PCS e KNOB 1PC PLATES 2PCS Smm x 1 2 lt KA SCREW 1PC PLASTIC BELTS 2PCS 7mm x 7 8 SCREWS 4PCS NOTE THE SURFACE WITH THE STI
4. CKER IS THE BACK SIDE X MAGNET 1PC 8 FEMALE MAGNET 1PC hm HOOKS 4PCS Z GECKOS 4PCS 3 10 Q T W 6mm x 1 2 SCREWS 12PCS 6mm x 5 8 SCREWS 8PCS Y CAM TOOL 1PC 6mm x 3 4 SCREWS 4PCS UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 10 NOTE e NOTE e PLACE CAM BOLTS G INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS H 5 10 ASSEMBLE THE BOTTOM PANEL D ASSEMBLE THE TOP PANEL A 125 e 4 CAM BOLTS G INTO THE HOLES IN THE BOTTOM PANEL D e PLACE CAM BOLTS G INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS H 2 e ROTATE 4 CAM BOLTS G INTO THE HOLES IN THE TOP PANEL A
Download Pdf Manuals
Related Search