POWERNAIL 101RW Use and Care Manual
Contents
1. Py POWERNAIL CO EEE 1300 Rose Road Lake Zurich IL 60047 Phone 1 800 323 1653 Website www powernail com Operation and Maintenance Manual MODEL 101R SURFACE NAILER Read this manual before you use this Nailer Follow all safety warnings and instructions If you are uncertain about the operation of the Nailer call us directly at 1 800 323 1653 for assistance or contact the closest Powernail Dealer for help Please retain this information for future reference REV 7 08 MODEL 101R EXPLODED VIEW PARTS LIST ITEM PART NO DESCRIPTION ITEM PART NO DESCRIPTION Spring Clip Dowel Pin Feeder Channel Plunger Liner Left Roller Pin Assembly Plunger linger Right Roller Plunger Foot Screw Driving Blade Locknut Plunger Spring Pin 08 101 00 150 Foot Plunger Spring 08 45 00 960 Spring Container Screw 49 Blade Retainer 08 45 00 170 Spring Container 59 Rachet Assembly 08 45 00 180 Feeder Spring Rachet Access Plate 08 45 00 930 Spring Container Lock Ring 08 45 00 711 Rachet Access Plate Screw 08 101 00 200 Gate MODEL 101R NAILING EXAMPLES Example 1 Position for suface nailing E N a Example 2 Position for tongue nailing unfinished boards at 45 angle REPLACING 38 DRIVING BLADE 1 Remove 5 Roller Pin save Cotter Pin 6 Holding Nailer in left hand with Nailer so rear of Nailer na ck is down slowly insert Plunger Head and Driving Blade 2 Holding Nailer in left h2. and with Nailer tilted so rear of Nailer n i is down depress 37R Plunger Head slightly so 5R Roller er a ee ee ie d is released from Plunger Head U OPN g _ 3 Remove 37R Plunger Head from Body of Nailer by lifting I nn position reinsert the 5 Roller Fin and straight out of Body l 4 Remove 38 Driving Blade from under 58 Rubber Blade h NAREN IE GONTAUD BE OR FE TOAGY AD UGO Retainer Discard Blade 5 Insert new 38 Driving Blade with face of Blade stamped Front facing front of Nailer under 58 Rubber Blade Retainer until the T section at top of Blade fits into milled slot under Plunger Head Push 58 Rubber Blade Retainer flush to underside of Plunger Head CAUTION Using a mallet in the manner shown below will not only break the plunger head but may also damage the nailer body to the point where factory repairs cannot be made WARNING DO NOT USE METAL ENDS OF A MALLET TO STRIKE POWERNAILER NAILERS 4
Download Pdf Manuals
Related Search