Splashback Tile C2C9 PARADISE EDEN SAMPLE Installation Guide
Contents
1. SPLASHBACK TILE Glass Tile Installation Guide Tile must be installed over a suitable substrate to insure a proper installation Glass tile should be installed over a clean sound and flat surface free of contaminates including curing compounds Substrate should be free of cracks If used in a wet area you must waterproof See manufacturer s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation For pools and fountains we recommend installing a mortar bed according to TCA P601 98 EXPANSION AND CONTROL JOINTS PER TCA EJ171 05 Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces therefore silicone caulking sealant must be installed in all corner joints in place of grout To avoid affecting the color of glass tile White modified thin set is recommended for all installations Apply thin set using a trowel as recommended by the manufacturer Apply as much adhesive as can be covered within 10 15 minutes Grout joint should be a minimum of 1 16 and not butt set The trowel size you can use is a 9 Trowel 1 16 square notch Grout joints should be packed full and free of voids and pits Clean excess grout as the work progresses before it has hardens completely Acids should never be used for cleaning grout2. haze Use a damp sponge for the final cleaning and to smooth out the grout joints It is recommended to use non sanded grout It is recommended to use grout release then grout the tile then use a sealant to the tile such as our The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass Edges can be sanded smooth after cutting
Download Pdf Manuals
Related Search