Merola Tile FKOUV418 Installation Guide
Contents
1. Introduction The following information is intended as an overview of the tile installation process It is not meant as a step by step instruction manual but rather as a way to familiarize yourself with the basic process Carefully follow all instructions provided by the manufacturers of your setting materials to ensure success Tools Have the right tools and installation products before you begin your tile installation Some of the supplies you may need are a wet saw tile nippers safety glasses trowels sponges grout tile spacers thinset gloves a grout float and a few buckets Surface Preparation Your installation surface or subfloor if using floor rated tile must be sound flat solid and clean of all debris Layout Dry Laying Plan your layout by measuring carefully to minimize cuts and dry lay your tiles for fit Ensure that all of your tiles are marked as the same dye lot number Additionally it is beneficial to mix tiles from different cases to prevent any obvious shade variations Cutting Tile If you need to cut the tile use tile nippers a tile cutter or a diamond tipped wet saw to cut it to a desired size Follow safety precautions and wear protective glasses Thinset and Mastic Be sure to select the correct type of adhesive suitable for your installation This can vary by tile material and installation location There are a variety of adhesives available such as mastic thinset polymer modified thinset and epox2. ightly damp sponge to remove any grout film After about 15 minutes buff the tile with a soft cloth Finished grout should be smooth uniform in color and have no visible holes pits or uneven height issues Mesh Backing Our mosaic tiles have a mesh backing that ensures appropriate bonding during installation For optimal performance avoid exposing the mesh to excessive moisture before installation which could result in the tiles falling off the mesh backing For this reason it may be beneficial to remove the tiles from the mesh and cut them individually with tile cutters or nippers rather than with a wet saw Stainless Steel and Aluminum Mosaics You can prevent scratches on these surfaces by using a clean sponge keeping the protective cover on and applying non sanded grout during installation If necessary cut this tile from the rear with a diamond tipped wet saw to prevent uneven edges Cut edges can then be treated and smoothed with fine sandpaper or a metal file Grout color is a matter of personal taste Please note that grout colors have a drastic impact on the look of your installation We have a blog post about the color choice process at this web address https merolatile wordpress com 2014 03 14 all about grout Special Notes for Mosaic Tiles Tile Installation Guide Improving Homes Improving Lives
3. y Follow the instructions provided by the manufacturer of your chosen adhesive Laying the Tiles Apply the thinset with an appropriately sized notched trowel then lay and press the tiles in place using a rubber mallet if needed Use spacers to create uniform grout lines Grout Selection Sanded or non sanded grout should be used depending on the product you are installing Floor tiles must be grouted For grout lines of 1 8 and larger sanded grout is more suitable The sand in the grout mixture decreases the shrinkage as it cures making it ideal for wider grout lines Non sanded grout is used for grout lines 1 8 and smaller It s also best for mosaics and decorative tiles with delicate finishes such as metallic pieces or high gloss products as the texture of sanded grout can scratch them Applying Grout The setting material must be fully dry before attempting to grout Consult the instructions for your setting material to find the recommended drying time Apply grout in small sections using a rubber float Pull the grout across the surface pushing it fully into the grout lines and keeping excess from building up on the tile surface Keep the grout level without any pits or low spots Grout Cleanup With a dry lint free cloth remove excess grout from the surface of the tile Lightly dampen a sponge with warm water and continue to clean grout off of the tile Once it appears to be clean wipe it down again with a fresh l
Download Pdf Manuals
Related Search