Shark S3251 Use and Care Manual
Contents
1. the floor Do not leave your steam mop on the floor with a damp or wet cleaning pad Do you have hard water If you do you might want to switch to distilled water Make sure the water is securely on the water tank Floors are cloudy streaky or spotty after steaming The pad might be dirty change the pad If you washed the pocket with powder detergent then the pad may have residual detergent left on it Wash it again with liquid detergent If you are cleaning in a kitchen area where there might be a build up of grease use a de greasing agent such as an all purpose cleaner or dish soap and paper towels to clean the area first You might have left the mop in the same spot for too long Do you have hard water If you do you might want to switch to distilled water This might be leftover from past cleaners used on the floor surface Use the steam mop a few more times and see if the leftover cloudiness is removed Light amp Easy Steam Mop is hard to push Make sure the steam pad is attached correctly Check to see if the cleaning pad is excessively dirty Replace if the pad is too dirty or wet 27 TOLL FREE 1 800 798 7398 Notes www sharkclean com Notes 12 FREE 1 800 798 7398 EURO PRO ONE 1 YEAR LIMITED WARRANTY EURO PRO Operating LLC warrants this product to be free from def2. other legal and or conventional warranties The responsibility of EURO PRO Operating LLC warranty if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is EURO PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever Some states provinces do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with the item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE Product Registration Please visit www sharkclean com or call 1 800 798 7398 to register your new Shark product within ten 10 days of purchase You will be asked to provide the store name date of purchase and model number along with your name and address The registration will enable us to contact you in the unlikely event of a product safety notification By registering you acknowledge to have read and und
3. x ct 87 fig 4 STEAM CLEANING NOTE Do not leave your 4 For your comfort you can adjust Steam Mop unattended the height of the mop Just lift during use the latch on the tube 90 degrees to the open position Holding the handle extend the tube to the desired height and then close the latch to the locked position A IMPORTANT Never leave the steam mop in one spot for any period of time with a damp or wet micro fiber pocket attached as this will 5 Plug in the mop Wait 50 damage your floors seconds for the unit to heat up and the steam to be ready Push the handle toward the mop head in a pumping motion Customize steam output by slow or fast mopping with a forward and backward motion fig 4 www sharkclean com This manual covers model number 53251 11 TECHNICAL SPECIFICATIONS Voltage 120V 60Hz Power 1550 Watts Water Capacity 250 ml 8 oz ER FREE 1 800 798 7398 Thank you for purchasing the Shark Light amp Easy Steam Mop Contents GETTING STARTED tret petitis 2 USING YOUR STEAM 6 STORAGE AND CARE OF YOUR STEAM MOP 8 TROUBLESHOOTING intres 10 WARRANTY AND 13 www sharkclean com 1 Getting Started When assembling your steam mop there may be alittle water in or around the water tank This is because we test all our steam mops 100 before you buy them s
4. CARE OF YOUR MICRO FIBER ORDERING REPLACEMENT PARTS CLEANING PAD To order additional parts and 1 Wash pads warm water Wash accessories feel free to contact us at separately from other laundry Only www sharkclean com or call use liquid detergent no powder 1 800 798 7398 detergent Do not use fabric softeners Line dry or dry on a low dryer setting fig 4 NOTE Some parts may be available at your local retailer Contact customer service for any other servicing 2 If there are loose threads on the pad carefully cut the threads with scissors Do not pull on them or cut at the base fig 5 IMPORTANT The micro fiber cleaning pad may be very hot from the steam Use caution when removing Let the unit cool for 5 5 minutes first before removing www sharkclean com 9 Trouble Shooting PROBLEM POSSIBLE REASONS amp SOLUTIONS The Light amp Easy Steam Mop will not turn on Your steam mop should be securely plugged into an electrical outlet Check your fuse or breaker If your unit still does not work call 1 800 798 7398 Light amp Easy Steam Mop will not make steam Light amp Easy Steam Mop leaves water on the floor Is there water in the water tank If not add water to your steam mop following instructions on page 5 Is your micro fiber cleaning pad too wet Unplug your steam mop and change the micro fiber cleaning pad Light amp Easy Steam Mop left white spot on
5. Shark WWwW SHARKCLEAN COM LIGHT amp EASY STEAM MOP 20231 OWNER S GUIDE IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK STEAM MOP BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING WARNING REpucE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY READ ALL INSTRUCTIONS BEFORE USING YOUR LIGHT amp EASY d DANGER OF SCALDING Please use caution when using the steam mop The steam emitted from the openings is very hot POLARIZED PLUG TO REDUCE THE RISK OF ELECTRIC SHOCK this appliance has a polarized plug one blade is wider than the other As a safety feature this plug will fit into a polarized outlet only one way If the plug does not fit fully into the outlet reverse the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature A WAR NI NG To reduce the risk of fire electric shock or injury Use the system only for its intended use DO NOT use outdoors 5 DO NOT leave the appliance unattended when plugged in Always unplug the power cord from the electrical outlet when not in use and before servicing 4 DO NOT allow the appliance to be used as a toy Close attention is necessary when used by or near children pets or plants 5 Use only as described in this manual 6 Use only manufacturer s recommended acce
6. brics velvet or other delicate steam sensitive materials DO NOT add cleaning solutions scented perfumes oils or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use If you live in a hard water area we recommend using distilled water in your steam mop When in use NEVER turn the appliance over or on its side NEVER DIRECT STEAM TOWARDS PEOPLE ANIMALS OR PLANTS Carefully remove the micro fiber pad immediately after you have unplugged and allowed the product to cool When cleaning the steam mop unplug the power cord from the electrical outlet and clean with a dry or damp cloth Do not pour water or use alcohol benzene or paint thinner on the unit 20 To reduce the risk of fire DO NOT use a flammable or combustible liquid to clean a floor 21 22 25 24 25 26 27 28 Extreme caution should be exercised when using this appliance to clean stairs Never use steam mop without micro fiber pad attached Keep your work area well lit Store steam mop indoors ina cool dry place To avoid circuit overload do not operate another appliance on the same socket circuit as the steam cleaner If an extension cord is absolutely necessary an extension cord rated a minimum of 15 ampere 14 gage cord should be used Cords rated for less amperage may overheat Care should be taken to arrange cord so that it cannot be pulled o
7. e to be cleaned before proceeding We recommend that you check the use and care instructions from the floor manufacturer www sharkclean com 3 Getting Started micro fiber cleaning pads should be replaced every 3 months to maximize cleaning performance fig 1 2 ATTACHING THE MICRO FIBER PAD Replacement micro fiber pads are available at www sharkclean com or by calling 1 800 798 7398 1 Place the micro fiber cleaning pad on the floor with the quick fastener strips facing up Place the Light amp Easy Steam Mop on the top of the pad to attach fig 1 A IMPORTANT Only add water to the tank Chemicals or cleaning solutions may be unsafe or cause damage A IMPORTANT Please wait 3 5 minutes for your Light amp Easy Steam Mop to cool off before removing the micro fiber pad R FREE 1 800 798 7398 Calcium and mineral deposits can build up and impact the performance of your steam mop over time To extend the life of your product we recommend that you use distilled water or Shark s Water Filtration Bottle Visit www sharkclean com to order FILLING THE WATER TANK 2 A filling flask is included with your IMPORTANT Unplug the Light amp Light amp Easy Steam Mop to Easy Steam Mop before filling the Ps d tank gis k water tank with water AS Qe e Keep the water level under the MAX 1 Remove the water tank cap by fi
8. ects in material and workmanship for a period of one 1 year from the date of the original purchase when utilized for normal household use subject to the following conditions exclusions and exceptions If your appliance fails to operate properly while in use under normal household conditions within the warranty period return the complete appliance and accessories freight prepaid For Customer Service support call 1 800 798 7398 or visit our website www sharkclean com If the appliance is found to be defective in material or workmanship EURO PRO Operating LLC will repair or replace it free of charge Proof of purchase date and 19 95 to cover the cost of return shipping and handling must be included The liability of EURO PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes This limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alterations to the product or any of its parts which have been performed by a repair person not authorized by EURO PRO Operating LLC This warranty is extended to the original purchaser of the unit and excludes all
9. erstood the instructions for use and warnings set forth in the accompanying instructions www sharkclean com 13 Questions or Problems CALL US We are here to help with our hassle free return service Toll Free Customer Support Telephone Mon Sat 7am 11pm Sun 9am 8pm EST 1 800 798 7398 consumer services euro pro com 2014 EURO PRO OPERATING LLC ing LLC U S Newton MA 02459 _11_ENG_IB_ Canada Ville St Laurent Qu bec 45 1A7 Ms 1 800 798 7398 www sharkclean com EURO PRO Operat ustrations may differ from actual product products therefore the specifications contained herein are subject to change without notice
10. iler to Mop with a forward and backward heat the water Pump the handle motion to customize steam output a few times to prime the pump automatically fig 5 IMPORTANT Never leave the Light amp micro fiber Ag 4 Easy Steam Mop with a damp wet micro fiber pad on any floor surface for any amount of time as this may damage the floor www sharkclean com 7 Care of Your Light amp Easy Steam 4 fig 2 AFTER USE AND STORAGE When you have finished using the Light amp Easy Steam Mop unplug the cord from the outlet and place the mop into the upright position fig 1 and let the unit cool 3 5 minutes Release steam by pumping the handle several times Carefully separate micro fiber cleaning pad from steam mop avoiding contact with the hot pad or dirt fig 2 Empty the water tank before storage Remove the water tank cap and empty the tank over a sink Replace the water cap 8 ToL FREE 1 800 798 7398 4 To store the cooled Shark Light amp Easy Steam Mop hang on a large hook fig 3 NOTE If you want to store the Light amp Easy Steam Mop standing upright make sure it is leaning against a wall for added support and safety Always store your Shark Light amp Easy Steam Mop with the micro fiber cleaning pad removed Store away from children and high traffic areas Care of Your Light amp Easy Steam
11. ll line turning it counter clockwise to the unlocked position fig 2 3 Replace the water tank cap and turn it clockwise to the locked position www sharkclean com 5 Using Your Light amp Easy Steam IMPORTANT Your steam mop needs water to make steam Never use your steam mop without water in the tank Sweep or vacuum your floors prior to cleaning with your Light amp Easy Steam Mop Visit www sharkclean com for other great quick cleaning products to complement your Light amp Easy Steam Mop such as the Shark Navigator 6 ToL FREE 1 800 798 7398 When you use your steam mop for the first time or if you have not used the unit in awhile it may take a minute or two for the water to travel through the pump and into the heater to create steam Get it started by pumping the handle a few times If you have waited a few minutes and you still do not see any steam reference the troubleshooting section on page 10 1 Pull and twist the quick release cord holder to unwrap the power cord completely fig 1 Plug into an electrical outlet fig 2 The light will turn blue If the light does not turn on reference the troubleshooting section on page 10 fig 3 your Light amp Easy Steam Mop stops steaming it could be out of water Unplug the power cord from the electrical outlet and refill the water tank at anytime 2 Wait 30 seconds for the bo
12. o you get a quality Shark Light amp Easy Steam Mop FIRST THINGS FIRST YOU NEED TO KNOW WHAT S IN THE BOX YOU JUST OPENED a Upper Extension Tube b Lower Extension Tube Telescopic Steam Base d All Purpose Cleaning Pads e Filling Flask 2 FREE 1 800 798 7398 ASSEMBLY Remove all the parts from the package Verify all the listed parts are included Slide the upper extension tube the tube with the handle into the lower extension tube the short tube Push the two extension tubes together in until you hear it click into place fig 1 Insert the assembled handle piece into the steam mop base Push the tube base together until you hear a click fig 2 4 For your comfort you can adjust the height of the mop Just lift the latch on the tube 90 degrees to the open position Holding the handle extend the tube to the desired height and then close the latch to the locked position fig 3 A QUICK TIP For easier pushing and pulling extend the handle length fig 3 IMPORTANT Never use the Light 8 Easy Steam Mop without attaching a micro fiber cleaning pad to avoid damage to your floor and mop IMPORTANT Do not use on unsealed wood or unglazed ceramic floors On surfaces that have been treated with wax or some no wax floors the sheen may be removed by the heat and steam action It is always recommended to test an isolated area of the surfac
13. r tripped over DO NOT leave unattended when the system is connected to a power supply or electrical outlet Turn off all controls before unplugging the unit DO NOT store unit with damp or wet micro fiber cleaning pad attached Never leave the steam mop in one spot on any surface for any period of time with a damp or wet micro fiber cleaning pad attached as this will damage your floors WARNING Your steam mop is designed to clean hard floor surfaces that will withstand high heat Do not use on unsealed wood or unglazed ceramic floors On surfaces that have been treated with wax or some no wax floors the sheen may be removed by the heat and steam action It is always recommended to test an isolated area of the surface to be cleaned before proceeding We also recommend that you check the use and care instructions from the floor manufacturer www sharkclean com Quick Start fig 1 ASSEMBLE FILL 1 Fit together the extension tubes Remove the cap to fill the as shown in the illustration water tank Use the filling flask fig 1 to fill the tank with water to the 2 Place the micro fiber cleaning MAX fill line Replacethe water tank cap ad underneath the mop head pacu u fig 3 with quick fastener strips facing up Simply press the mop to the pad to attach it fig 2 RP FREE 1 800 798 7398 QUICK TIP For easier pushing and pulling extend the handle length 9
14. ssories 7 DO NOT operate the appliance with a damaged plug or cord or if the unit has been dropped damaged left outdoors or dropped into water To avoid the risk of electric shock do not disassemble or attempt to repair the appliance on your own Return the appliance to EURO PRO Operating LLC see warranty for examination and repair Incorrect re assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used 8 To protect against a risk of electric shock DO NOT immerse the steam mop into water or any other liquids 9 DO NOT handle plug or steam mop with wet hands or operate appliance without shoes 10 DO NOT pull or carry by power cord use power cord as handle close a door on the power cord or pull the power cord around sharp edges or corners Keep power cord away from heated surfaces d ER FREE 1 800 798 7398 11 12 13 14 15 16 17 18 19 DO NOT unplug by pulling on power cord To unplug grasp the plug not the power cord Do not use extension cords or outlets with inadequate current carrying capacity DO NOT put any objects into openings Do not use with any opening blocked DO NOT put hands or feet under the steam mop Unit gets very hot Use ONLY on flat stable horizontal surfaces Do not use on walls counters windows chairs or tables DO NOT use on leather wax polished furniture or floors synthetic fa
Download Pdf Manuals
Related Search