RectorSeal 87733 Instructions / Assembly
Contents
1. RECTORSEAL WBB300 amp WBBS500 Installation Bracket Arm 2 Crossbar 1 8x80mm 10mm Concrete Rubber Mount 4 P Lag Screw 6 Anchor 6 Extend bracket arms Level and attach crossbar with two lag Insert clear clip nut into mounting screws or anchors provided Substitute key hole from below arm Attach other fastener types where appropriate rubber mount through key hole Slide extended bracket arms onto aligning center hole with clip nut crossbar Repeat and slide all four mounts to the center of their respective slots Tighten two bolts on each arm Unscrew rubber stand offs on the Position arms to accomodate equipment Position mounts to accomodate back of each arm as needed to measurments and tighten set screws equipment measurments Place level both arms Use remaining lag screws or anchors to condenser on mounts aligning holes secure bracket arms in feet with center hole in mounts Attach using 4 provided bolts The buyer of the aforelisted product s hereby indemnify RectorSeal Corporation its successors and assigns as they may in time appear harmless against any claims demands or liability arising out of the misuse of or from any use outside the intended scope of the aforelisted product s Misuse or use outside the intended scope shall include any use contrary to that which is indicated with the accompanying literature and instructions This unit must be installed in accordance with all applicable local building and mech2. anical codes The purchaser or installer of these products is responsible for insuring that the structure and or building materials making up the structure are of sufficient strength and a sufficient number and type of fasteners are installed to take the combined weight of the bracket and unit or units 7 Ga www rectorseal com 2601 Spenwick Drive Houston TX 77055 713 263 8001 800 231 3345 amp 713 263 7577 800 441 0051
Download Pdf Manuals
Related Search