American Standard 3060.100.CRW Instructions / Assembly
Contents
1. Armbrican Standard Overflow with Quick Drain Connection of the Quick Drain Installation of the Quick Drain System requires the connection to a minimum 1 4 sanitary drain line Use only SCH 40 1 1 2 diameter pipe and fittings use approved PVC primer and glue The Sanitary Tee from the Quick Drain should be installed directly above the Drain Tee There should be a maximum of 1 of 1 1 2 PVC pipe between the two Sanitary Tees Dry fit the drain overflow assembly to the sanitary drainage pipe and check for proper fit Glue the Quick Drain fittings pipe and drain overflow assembly to the sanitary drainage pipe ae a Over Flow Supplied j Pre Installed Back Flow Manifold Not Supplied Pi To Check Valve Drain Cable Manifold From Quick Pa Drain Pump Flow Direction i Stopper Reducer 1 1 2 x1 P o Sanitary Tee Strainer N ST 90 Elbow CS Gasket Sanitary Te ha Drain Shoe Subfloor Drain Te een N P We have taken reasonable precautions to ensure the Quick Drain is suitable for residential plumbing it is the responsibility of the installer to insure that the plumbing is acceptable for use of the Quick Drain We do not accept responsibility for damage arising from the use of the Quick Drain e Please verify compliance with local and state code requirements for the installation e Do not change or modify the location and or pi2. ping connection of the Back Flow Manifold e Installation of the Quick Drain System requires the connection to a minimum I 2 sanitary drain line e Use an approved Schedule 40 PVC Pipe PVC Primer and PVC Glue for sanitary pipe applications e Pre assemble the waste overflow assembly per installation instructions
Download Pdf Manuals
Related Search