Fortress HD0012TP Instructions / Assembly
Contents
1. LIN i Operation and Safety Guide scaffold Towers Casters Base Plates amp Leg Jacks D RY FORTRESS ALE INDUSTRIES LLC l i Aza wl YI 5 High 10 High amp 15 High Support Phone No 800 980 8841 SAFETY TOPICS Inspect scaffold daily or before each use Do not exert horizontal force from on top of a free Standing scaffold Do not climb or stand on Cross brace or horizontal Brace Do not swing around corner of scaffold to enter platform from the cross brace side Do not use boxes ladders or other means to increase working heights Do not stand or sit on guard rails Do not use bricks boxes Concrete blocks or any other unstable objects Under scaffold leg NEVER ride a moving Scaffold Do not move scaffold by applying a pulling or pushing force at or near the top of scaffold tower Do not use braces as a platform sup port Do not use side brackets on a Rolling Tower When hoisting material or using side brackets scaffold must be restrained from tipping by guying tying to a permanent structure or other accept able means Restrict loading to safe working loads Use caution Keep scaffold away from all electric hazards Wear hard hats and safety glasses when required Check all scaffold parts for damage making sure that they are in proper working condition prior to assembly and erec tion of scaffold Equipment that is2. damaged or is not in proper working condition should not be used Attach 2 scaffold frames with 2 cross braces Insert 4 casters or base plates into bottom of scaffold frame legs secure with locking pins or gravity pins When using leveling jacks first insert caster or base plates into leveling jacks secure with locking pins or gravity pins then insert leveling jacks into bottom of scaffold frame legs If using casters be sure to set brakes to proceed When choosing casters for a rolling scaffold tower the in stallation of a squaring brace is needed and applied diago nally at base of scaffold frames 4 Outriggers are needed for all scaffold towers of 15 feet high Insert casters or base plate into outrigger leg with locking pins or gravity pins Attach outriggers to scaffold frame and tighten clamp firmly Apply 3 scaffold platforms along top horizontal of scaffold frames Continue to back of page HDCOOO1FT Scaffold Towers Casters Base Plate Leg Jack Operations amp Safety Continued Steps For Erecting Scaffold Towers Questions or Problems Need More Information The instructions on this sheet are abbreviated instructions only and are provided solely as a customer service If additional information is needed please contact one of our sales associate to assist you Fortress Industries LLC 800 980 8841 Tl 11 T FORTRESS INDUSTRIES LLC Cross Brace 5x9 Scaffold Frame Outrigge
3. r Gravity Pin Adding Tower Height Add additional scaffold frames by installing bottom of additional scaffold frames onto insert pins at the top of scaffold frames erected in step 2 and secure with gravity locks Then apply 2 cross braces to additional scaffold frames Be sure to install scaffold frames so that steps continue above one another on the same side of frame Move the scaffold platforms to the newly added frames and install as previous in step 6 With this step you are at a 10 foot height repeat this step 7 to achieve 15 foot height After reaching desired height install guard panel system First install 2 5 foot end panels onto top of scaffold frames insert pins and secure with gravity locks Then in stall 2 side panels onto locks of end panels The 2 toe boards are now installed into the toe board bracket of the end panels and secured with toggle pins Leveling Jack Locking Gravity Pin Pin Squaring Guard Panel System E 4 oe Side Panel ee ro Side Toe Board LUA Toggle Pin Gravity Pin End Panel
Download Pdf Manuals
Related Search