Builders Edge 130110008048 Installation Guide
Contents
1. Surface Master Installation Instructions CAUTION All electrical connections must be in accordance with state and local codes ordinances and the National Electrical Code If you are unfamiliar with methods of installing electrical wiring and devices secure the services of a qualified licensed electrician Note Although the Octagon Surface Master is shown below the same installation techniques are used for all styles of Surface Masters apply caulk here Step 1 Cut the desired opening in the Surface Master by cutting along the patterns provided on the back of the part There s also a drilling support in the middle of the Surface Master This is supplied for drilling custom sized round holes if needed See figure at right 041889 drill support for custom sized holes USE FIXTURE AGAINST SIDING Step 2 Apply caulk in the groove in the back of the Surface Master The caulk will create a seal between the siding and the Surface Master Any moisture and condensation that does build up will drain out the bottom of the part from the weep hole See figure at right weep hole Step 3 With the caulk applied place the Surface Master over the desired location and hold in place Make all wire connections to the fixture in accordance with electrical code A second person may be needed to hold the Surface Master on the wall while these connections are being made Step 4 Once the connections have bee2. n made the Surface Master can now be fastened to the wall This is done by attaching the light fixture to the wall and using the fixtures mounting hardware to sandwich the Surface Master between the siding and light fixture Note Common sense caution and care are factors which cannot be built into any product These conditions must be supplied by the person s installing the fixture
Download Pdf Manuals
Related Search