Zinsser 249937 Use and Care Manual
Contents
1. ZINSSER QUALITY SINCE 1849 DESCRIPTION AND USES Zinsser Bulls Eye 1 2 3 Plus Primer is an all purpose all surface water based interior exterior primer that features all the performance characteristics of oil based primers It features low odor low VOC has excellent stain blocking resistance is fast dry has excellent flow and leveling and excellent adhesion to glossy surfaces The dried film is mold and mildew resistant It is suitable for use on bare or painted surfaces including wood drywall cured plaster concrete and masonry stucco aluminum vinyl galvanized metal and PVC It provides excellent adhesion to dense glossy surfaces enamel paints and varnishes paneling laminates and ceramics without sanding or de glossing PERFORMANCE CHARACTERISTICS Blocks all stains Adheres to all surfaces Use with any topcoat Dries in 1 hour PRODUCTS SKU Description 249935 5 Gallon 249937 1 Gallon 249933 1 Quart PRODUCT APPLICATION SURFACE PREPARATION Surfaces should be clean dry sound and free of dust dirt excessive chalky material grime grease oil wax mildew wallpaper adhesive or any contamination that may interfere with adhesion If unsure of cleanliness always wash surface with household ammonia and water solution appropriate cleaning solution or solvent do not use TSP as a cleaner Remove any peeling and or unsound coatings Scuff sand bare aluminum Sand any remaining paint film edges2. stains from water smoke cedar or redwood bleed grease handprints asphalt crayon graffiti and rust stains Make sure all water leaks are repaired before applying Bulls Eye 1 2 3 Plus to a water stain If the water stained surface requires patching apply Bulls Eye 1 2 3 Plus before and after applying the spackling and patching compound After applying Bulls Eye 1 2 3 Plus to the stain the stain may appear in the primer film This is a normal occurrence The stain will be locked in the primer film and will not bleed into the topcoat Allow 2 hours to dry for interior stain blocking and overnight for bare cedar and redwood Certain applications may require a second coat of primer Prime severe water and smoke stains and block associated odors with Zinsser B I N Primer Stain Blocker Form GDH 215 Rev 103013 TECHNICAL DATA BULLS EYE 1 2 3 PLUS PRIMER PRODUCT APPLICATION cont LIMITATIONS Bulls Eye 1 2 3 Plus is not recommended for exterior applications such as floors decks roof surfaces or any surface subject to immersion or prolonged contact with water Do not box or intermix Bulls Eye 1 2 3 Plus with other water based products APPLICATION Apply only when air material and surface temperatures are between 50 90 F 10 32 C and the relative humidity is below 85 Thoroughly mix to ensure any settled pigment is re dispersed before using In most cases only one coat is necessary to prime most surfaces If exc
3. essive absorption occurs over very porous substrates a second coat may be necessary Spot priming is recommended only under high hiding topcoat finishes For best results prime entire surface before painting Apply with a synthetic nylon polyester or blend bristle brush roller or airless sprayer Follow manufacturer s instructions when using spray equipment For airless spraying use a 0 017 tip at 2000 to 2500 psi Wear NIOSH approved respirator and provide adequate ventilation THINNING If thinning is necessary add no more than 10 fluid ounces of clean water per gallon and mix thoroughly Note that thinning the primer may affect its stain blocking properties TINTING Bulls Eye 1 2 3 Plus may be tinted with up to 2 ounces of universal colorant per gallon Tinting the primer toward the color of the topcoat helps hide in one coat Shake or stir well before using DRY TIME Dries to the touch in 30 minutes can be recoated in 1 hour Full adhesion and hardness develops in 7 days Lower temperatures higher humidity and the addition of tint will prolong dry and cure time Allow more time at cooler temperatures PRODUCT APPLICATION cont CLEAN UP Clean up spills and paint drips with detergent and warm water If spills or drips have dried use denatured alcohol or ammoniated detergent to soften and remove primer Wash application tools in detergent and warm water immediately use Follow equipment manufacturer s di
4. rections to clean spray equipment Dispose of unused or unwanted product in accordance with local laws regulating water based coatings Form GDH 215 Rev 103013 TECHNICAL DATA BULLS EYE 1 2 3 PLUS PRIMER PHYSICAL PROPERTIES Physical Properties BULLS EYE 1 2 3 PLUS PRIMER Resin Type Water based modified Acrylic Pigment Type Titanium Dioxide Solvents Waiter Glycol Ethers Weight Per Gallon 10 9 Ibs Per Liter 1 31 kg Solids By Weight 50 5 By Volume 35 4 Volatile Organic Compounds lt 10 g l 0 08 Ibs gal Recommended Dry Film 1 0 1 5 mils Thickness DFT per Coat 25 37 5u Wet Film to Achieve DFT Unthinned 3 0 4 0 mils material 75 100 Theoretical Coverage at 568 sq ft gal 1 mil DFT 25p 14 0 m l Practical Coverage at Recommended DFT assume 15 material loss Approximately 400 sq ft gal 9 8 m depending on application method and surface porosity Touch 30 minutes cies etre Recon ie Relative Humidity Full Harness 7 days Shelf Life 5 years Flash Point gt 200 F 93 C Storage 40 90 F 4 32 C Safety Information For additional information see MSDS The technical data and suggestions for use contained herein are correct to the best of our knowledge and offered in good faith The statements of this literature do not constitute a warranty express or implied as to the performance of these product
5. s As conditions and use of our materials are beyond our control we can guarantee these products only to conform to our standards of quality and our liability if any will be limited to replacement of defective materials All technical information is subject to change without notice ma RUST OLEUM BRANDS Rust Oleum Corporation Form GDH 215 11 Hawthorn Parkway Phone 877 385 8155 Rev 103013 Vernon Hills Illinois 60061 www rustoleum com An RPM Company
6. smooth Spot prime knots and sap streaks with Zinsser B I N Primer Stain Blocker gt TECHNICAL DATA BEY123 03 BULLS EYE 1 2 3 PLUS PRIMER FOR ALL PROJECTS PRODUCT APPLICATION cont WARNING If you scrape sand or remove old paint you may release lead dust LEAD IS TOXIC EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS BRAIN DAMAGE ESPECIALLY IN CHILDREN PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE Wear a NIOSH Approved respirator to control lead exposure Clean up carefully with a HEPA vacuum and a wet mop Before you start find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1 800 424 LEAD or log on to www epa gov lead INTERIOR PRIMING Bulls Eye 1 2 3 Plus provides excellent adhesion to all surfaces such as paneling and glossy paints It seals new drywall and painted surfaces top provide for more even color and sheen It also hides dark surfaces EXTERIOR PRIMING Bulls Eye 1 2 3 Plus seals wood masonry and stucco It has excellent adhesion to vinyl and aluminum siding and fiberglass doors Use Bulls Eye 1 2 3 Plus to prime galvanized metal SEALING Bulls Eye 1 2 3 Plus penetrates deeply to seal porous surfaces and provides a smooth and even finish to extend the coverage of topcoats ad provide uniform and consistent sheen Excellent for use on moderately chalked aluminum or previously painted aluminum siding and trim STAIN BLOCKING Blocks
Download Pdf Manuals
Related Search