Home

Yamaha YSP-900 Owner's Manual

Contents

1. MUTE TVINPUT TV MUTE CODE SET CD AV POWER Turns on or off the power of your DVD player Numeric buttons Use to enter numeric digits 3 MENU Displays the DVD menu Cursor buttons A xz lt gt ENTER Use to select DVD menu items RETURN Use to return to the previous DVD menu screen or exit the DVD menu 6 Operation buttons for DVD and VCR players Use to perform DVD player operations such as play and stop E Operating your VCR Set the operation mode selector to TV AV and then press VCR to select VCR as the input source The control area of the remote control changes to the VCR operation mode VCR STANDBY ON POWER POWER 00 afaka INPUTI INPUTZ MACRO w Q C AUTO OLMODE SETUP INPUTMODE SLEEP 3 TE3 TES ST 3BEAM 3BEAM O 2 STEREO MY BEAM SI peso MUSIC MOVIE s Des 5 TEST OC RETURN 3 8 D lt i e m o c 2 5 aE e D U MUTE CD AV POWER Turns on or off the power of your VCR CH Switches between the available VCR channels 3 Operation buttons for DVD and VCR Use to perform VCR operations such as play and stop REMOTE CONTROL FEATURES Operating your STB CATV Satellite tuner Set the op
2. 6 Press STANDBY ON on the front panel to set parameters on page 72 this unit to the standby mode 2 Set the operation mode selector to YSP to switch to the operation mode of this unit Cl STANDBY EP The new setting for the maximum volume level will E l be activated when you turn on the power of this unit next time 73 En ADJUSTING SYSTEM PARAMETERS Setting the TURN ON VOLUME You can set the initial volume level when the power of this unit is turned on 1 Repeat steps 1 to 3 in Using the system parameters on page 72 2 Set the operation mode selector to YSP to switch to the operation mode of this unit TVAV YsP 3 Press A V onthe remote control so that TURN ON VOLUME is shown in the front panel display 4 Press ENTER Control range MAX 99 to 01 OFF Control step 1 74 En 6 Press STANDBY ON on the front panel to set this unit to the standby mode Cy The new setting for the maximum volume level will be activated when you turn on the power of this unit next time Setting the DEMO MODE You can test the beam output from this unit to experience the sound beam Mu AOA You can also perform this function simply by pressing INPUT on the front panel A sound beam is output from this unit when you press and hold INPUT for more than 2 seconds The sound beam shuttles between left and right twice and then stops 1 Repeat step
3. 29 Dolby Digital etre ttt tte ete 42 Dolby Pro LO G16 x eee ERR 42 Dolby Pro Logic IL ertet enin nennen n 42 DIS conoces MR INC E e 42 HERO ERR RIPE 42 Dynamic rage orar Yee en 64 Front panel display rre tt etin 7 LEE channel 5 rettet 85 MANUAL SETUEP pe reper cernes 57 MEMORY a 34 35 My prece tee te dehet ee eere 47 86 En On screen display OSD sess 24 Optimizer 28 etaient ie ie de eee taa 85 Power supply cable erinnerte 21 Remote control nre Remote control code SET MENU nh tee E Re Re UU 24 Sleep timet ese Eee EAR een 55 Sound field program eene 49 Surround mode iip 42 oe onse tede etti cose 68 Tt B a5S teen terii e S e E Fe 54 EREE e e e PRESE 80 Volume mode ie 52 SPECIFICATIONS AMP SECTION Maximum Output Power EIAJ EI n 2 W 1 kHz 10 THD 4 Q x 21 20 W 100 Hz 10 THD 4 Q x 2 SPEAKER SECTION Small dia speakers 4 cm cone magnetic shielding type x 21 WOOferS 10 cm cone magnetic shielding type x 2 Input Jacks AUDIO VCR TV STB Analog 1 V 32 kQ 2 pairs Analog AUDIO TV STB AUX Optical 2 Digital AUDIO D
4. 1 Repeat steps 1 3 in Using the system parameters on this page CO C 2 Setthe operation mode selector to YSP to switch to the operation mode of this unit TV AV YsP 4 TEST E RETURN TV AV OC oan 1 Press STANDBY ON on the front panel to 3 Confirm that MEMORY PROTECT is shown in turn off the power of this unit the front panel display and then press ENTER Cy 2 Press and hold INPUT on the front panel and then press STANDBY ON on the front panel to turn on the power of this unit MEMORY PROTECT is shown in the front panel display INPU Cy 72 En ADJUSTING SYSTEM PARAMETERS 4 Press b to switch between PROTECT ON 3 Press A 7 on the remote control so that and PROTECT OFF MAX VOLUME SET is shown in the front panel display 4 Press ENTER Select PROTECT ON to activate the protection feature Select PROTECT OFF to deactivate the protection feature 5 Press STANDBY ON on the front panel to set this unit to the standby mode level STANDBY The new setting will be activated when you turn on the power of this unit next time Setting the MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level Control range MAX 99 to 01 MIN Control step 1 gt m E AS m 1 R t st 1 to 3 in Using th t EO ce oo ee NR
5. Rear panel of this unit CR TV STB SUBWOOFER VIDEO TV STB AUX DVD OPTICAL COAXIAL AUDIO INPUT OUT DIGITAL INPUT Cables used for connections Optical cable supplied 19 En CONNECTIONS Connecting a subwoofer To connect a subwoofer connect the monaural input jack on your subwoofer to the monaural audio output jack SUBWOOFER OUT on this unit No sound will be output from a subwoofer when only this connection has been made To output sounds from a subwoofer turn on the power of your subwoofer and then run AUTO SETUP see page 27 or select SWFR for BASS OUT in SUBWOOFER SET see page 63 Subwoofer 1 Monaural input Rear panel of this unit CR TV STB SUBWOOFER VIDEO TV STB AUX DVD OPTICAL COAXIAL AUDIO INPUT OUT DIGITAL INPUT Cables used for connections Subwoofer pin cable Sip gt 20 En CONNECTIONS Connecting the power supply cable Once all other connections are complete plug the power supply cable into the AC wall outlet To the AC outlet D Te H 4S I ELT 21 En GETTING STARTED Installing batteries in the remote control Press A 1 Press and hold the A mark on the battery cover and then slide off the cover 2 Insert the two supplied batteries AA R6 UM 3
6. OUT DIGITAL INPUT Cables used for connections Digital audio pin cable supplied Audio pin cable White E37 L5 White Orange Ea Orange Red Red 16 En CONNECTIONS Connecting a VCR To connect a VCR connect the analog audio output jacks on your VCR to the analog audio input jacks VCR R L on this unit Connect red plugs to the right jacks and white plugs to the left jacks VCR Video signal to a TV Analog audio output R L D Te T 4S ELT Rear panel of this unit m VCR TV STB SUBWOOFER VIDEO TV STB AUX DVD OPTICAL COAXIAL AUDIO INPUT OUT DIGITAL INPUT Cables used for connections Audio pin cable White e E33 CET White Red Red 17 En CONNECTIONS Connecting a digital satellite tuner or a cable TV tuner To connect a digital satellite tuner or a cable TV tuner connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the optical digital input jack TV STB OPTICAL on this unit In addition connect the analog audio output jacks on your VCR to the analog audio input jacks TV STB R L on this unit Connect red plugs to the right jacks and white plugs to the left jacks Mou AOA To prevent the optical cable from being unplugged affix the
7. Room width Room length Choices for the room width and length 2 0 mto 12 0 m Choices for the listening position from this unit ikl C12 UecDoun Veer 1 8m to 9 0m HORIZONTAL ANGLE Horizontal angle Use to adjust the horizontal angle of beams for each channel By adjusting the horizontal angle of the beams you can optimize the sound beam paths A test tone is automatically output Room width and length Lali Ue Down 414LR1 5e1 CENTER Return Listening position from the unit LAl Dw tUe Doun A e Sel LEHTER Return Choices L90 to R90 Adjust towards L left to move the direction of the output Note s 2 to the left and adjust towards R right to move it to the When you set the INSTALLED POSITION parameter in right MANUAL SETUP see page 59 the parameters newly set for the width and length of your listening room are automatically set as the factory default value R98 tded L l Del lesDown Dal Cr Se 1 Return 60 En MANUAL SETUP BEAM TRAVEL LENGTH Beam travel length FOCAL LENGTH Focal length A certain amount of delay must be applied to the sound Use to set the distance from the front of this unit to the from each channel so that all sound will arrive at the focal point of output for each channel and adjust an listening position at the same time This menu sets the expansive feeling of each channel distance that sound beams t
8. ADJUSTING THE AUDIO BALANCE 9 Press TEST when you have completed all Using the audio output being your adjustments played back TEST You can also manually adjust the channel levels while playing back an input source such as a DVD CH LEVEL MENU Notes All the channel levels cannot be adjusted when the stereo playback or my beam is selected as the beam mode see pages 46 and 47 FRONT L R cannot be adjusted when the stereo plus 3 beam is selected as the beam mode see page 41 FRONT L R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode see pages 41 and 1 Set the operation mode selector to YSP to switch to the operation mode of this unit If the level of a particular channel cannot be adjusted dB TV AV appears in the front panel display E 2 Press CH LEVEL repeatedly or press CH LEVEL and then A V to select the channel you want to adjust The front panel display changes as follows CH LEVEL or CH LEVEL D e 4 0 69 En ADJUSTING THE AUDIO BALANCE Note SWER is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU see page 63 3 Press lt gt to adjust channel volumes Control range 10 dB to 10 dB 4 Wait for a few seconds without operating this unit whe
9. O ENJOYING SURROUND SOUND Enjoying TV in surround sound You can enjoy analog audio signals output from your TV in real surround sound Mr AOA Before performing the steps below set the volume of this unit to 30 If necessary adjust the volume level in step 4 below INPUTI INPUT2 MACRO v s VOL MODE SETUP INPUTMODE SLEEP C 5BEAM ST 3BEAM 3BEAM CG STEREO BEAM SURROUND MUSIC MOVIE SPORTS 1 Selectthe TV channel you want to watch To select a TV channel use the remote control supplied with your TV 2 Set the operation mode selector to YSP to switch to the operation mode of this unit TV AV 3 Press TV on the remote control This unit outputs audio signals from your TV eh 4 it you hear sound from your TV speakers reduce the volume level of your TV until you can no longer hear any audio being output To reduce the TV volume level use the remote control supplied with your TV 44 En 5 Press VOLUME on the remote control to adjust the volume level VOLUME Press SURROUND repeatedly or press SURROUND and then press 4 P on the remote control to select a surround mode Signals input from 2 channel sources are played back on multiple channels For more information on surround modes see page 42 SURROUND SURROUND B When Dolby Pro Logic II Music is Adjusting surround mode selected parameters PANORAMA You can con
10. 395 OKANO 323 OLYMPIC 325 328 ORION 327 PANASONIC 325 328 339 355 378 384 385 386 PENTAX 333 349 PHILCO 325 328 397 PHILLIPS 325 326 328 337 356 357 PHONOLA 337 PILOT 396 PIONEER 325 QUASAR 325 328 RCA PROSCAN 325 326 328 333 335 349 358 363 397 REALISTIC 393 397 328 336 359 362 396 363 SAMSUNG 354 358 363 364 365 366 SANSUI 394 SANYO 393 336 367 SCHNEIDER 337 SCOTT 399 335 336 348 359 354 358 SELECO 322 SHARP 395 362 382 SIEMENS 393 SIGNATURE 2000 395 397 SONY 368 379 372 373 374 375 SYLVANIA 397 325 326 328 SYMPHONIC 397 TANDBERG 334 TANDY 397 TASHIRO 396 TATUNG 392 394 TEAC 392 394 397 TECHNICS 325 328 TEKNIKA 396 TELEFUNKUN 376 371 THOMAS 397 THORN 393 396 TOSHIBA 335 389 TOTEVISION 363 396 UNITECH 363 UNIVERSUM 396 327 376 VIDEOSONIC 363 W WHOUSE 396 WARDS 395 396 336 362 397 363 YAMAHA 399 392 393 394 ZERITH 344 361 368 371 379 396 397 CABLE TV TUNER ABC 739 752 753 755 758 759 762 GENERAL INSTRUMENT 722 HAMIN 723 724 125 726 727 722 JEROLD 722 728 729 732 733 734 735 736 737 MAGNAVOX 738 MOTOROLA 748 OAK 739 742 743 PANASONIC 744 745 746 TAT 783 784 PHILLIPS 763 764 765 766 767 768 PIONEER 748 785 747 RADIO SHACK749 SCIENTIFIC ATLANTA 752 753 754 SONY 756 757 TOCOM 755 UNIVERSAL 769 772 773 774 775 VIEWSTAR 764 766 776 777
11. 778 779 782 SATELLITE TUNER ECHOSTAR 822 GE 837 838 839 GENERAL INSTRUMENT 823 HITACHI 824 HUGHES 843 844 845 846 JVC 822 MAGNAVOX 825 PANASONIC 826 829 PHILLIPS 825 843 844 845 846 847 848 849 PRIMESTAR 827 PROSCAN 837 838 839 842 RADIO SHACK 828 RCA 837 838 839 842 SAMSUNG 852 SONY 832 835 TOSHIBA 833 836 UNIDEN 825 ZENITH 834 amp YAMAHA 2006 YAMAHA CORPORATION All rights reserved YAMAHA ELECTRONICS CORPORATION USA 6660 ORANGETHORPE AVE BUENA PARK CALIF 90620 U S A YAMAHA CANADA MUSIC LTD 135 MILNER AVE SCARBOROUGH ONTARIO M1S 3R1 CANADA YAMAHA ELECTRONIK EUROPA G m b H SIEMENSSTR 22 34 25462 RELLINGEN BEI HAMBURG GERMANY YAMAHA ELECTRONIQUE FRANCE S A RUE AMBROISE CROIZAT BP70 CROISSY BEAUBOURG 77312 MARNE LA VALLEE CEDEX02 FRANCE YAMAHA ELECTRONICS UK LTD YAMAHA HOUSE 200 RICKMANSWORTH ROAD WATFORD HERTS WD18 7GQ ENGLAND YAMAHA SCANDINAVIA A B J A WETTERGRENS GATA 1 BOX 30053 400 43 V STRA FR LUNDA SWEDEN YAMAHA CORPORATION YAMAHA MUSIC AUSTRALIA PTY LTD 17 33 MARKET ST SOUTH MELBOURNE 3205 VIC AUSTRALIA Printed in Malaysia lt WH83000 1 English YAMAHA Connect For furth YSP 9O00 This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick easy manner For detailed operation refer to the Owner s Manual Decide where to install this unit Instal
12. AUX DVD OPTICAL COAXIAL DIGITAL INPUT P VCR analog audio input jacks Use to make an analog connection to your VCR see page 17 TV STB analog audio input jacks Use to make an analog connection to your TV digital satellite tuner and cable TV tuner see pages 15 and 18 SUBWOOFER OUT jack Use to connect a subwoofer see page 20 VIDEO OUT jack Use to connect to the video input terminal of your TV to display the OSD of this unit see page 15 TV STB OPTICAL DIGITAL INPUT jack Use to connect a TV digital satellite tuner and cable TV tuner via an optical digital connection see pages 15 and 18 8 En 6 AUX OPTICAL DIGITAL INPUT jack Use to connect an external component via an optical digital connection see page 19 DVD COAXIAL DIGITAL INPUT jack Use to connect a DVD player via a coaxial digital connection see page 16 AC power supply cable Use to connect to the AC wall outlet see page 21 CONTROLS AND FUNCTIONS Remote control The functions of some buttons change depending on the position of the operation mode selector 9 This section basically describes the functions of the remote control used to control this unit You can also control other components using the remote control once you set the appropriate remote control codes See Controlling other components on page 78 for details 2 STANDBY ON ott UU o D INPUT1 INPUT2 MACRO 2
13. YAMAHA YSP 900 Digital Sound Projector Syst me Acoustique Num rique OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION READ THIS BEFORE OPERATING THIS UNIT 1 20 To assure the finest performance please read this manual carefully Keep it in a safe place for future reference Install this sound system in a well ventilated cool dry clean place with at least 5 cm of space above or below this unit away from direct sunlight heat sources vibration dust moisture and or cold Locate this unit away from other electrical appliances motors or transformers to avoid humming sounds Do not expose this unit to sudden temperature changes from cold to hot and do not locate this unit in an environment with high humidity i e a room with a humidifier to prevent condensation inside this unit which may cause an electrical shock fire damage to this unit and or personal injury Avoid installing this unit where foreign object may fall onto this unit and or this unit may be exposed to liquid dripping or splashing On the top of this unit do not place Other components as they may cause damage and or discoloration on the surface of this unit Burning objects i e candles as they may cause fire damage to this unit and or personal injury Containers with liquid in them as they may fall and liquid may ca
14. beam angle manually or automatically using the supplied remote control Cinema DSP Digital This unit employs the Cinema DSP Digital technology developed by YAMAHA Electronics Corp so that you can experience movies at home with all the dramatic sound impact that the director intended to convey Versatile Remote Control The supplied remote control come with preset remote control codes to be used to control the DVD player VCR cable TV tuner and digital satellite tuner connected to this unit In addition the remote control is equipped with the macro capability so that you can perform a series of operations with the press of a single button Inte liBeam The Inte liBeam logo and IntelliBeam are trademarks of YAMAHA Corporation trademarks of YAMAHA Corporation 0 DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories AUTO SETUP IntelliBeam This unit employs the automatic sound beam and acoustic optimization technology with the aid of the supplied optimizer microphone so that you can avoid troublesome listening based speaker setup and achieve highly accurate sound beam adjustments that best match your listening environment Compatibility with the Newest Technologies This unit employs decoders compatible with Dolby Digital DTS Digital Theater Systems Dolby Pro Logic Dolby Pro Logic II and DTS Ne
15. gt LANGUAGE SETUP L amp l Dr1 UgzDouwn CENTER Enter Mz AOA The control buttons used for SET MENU are displayed on the bottom of the screen To return to the previous screen while using SET MENU press RETURN on the remote control To cancel the SET MENU screen press MENU once more You can also perform the following operations in the front panel display 34 En USING THE SYSTEM MEMORY Press A V to select MEMORY1 Loading settings MEMORY 2 or MEMORYS and then press ENTER The following screen appears on your TV 7 Press MENU to exit You can recall the settings saved in Saving settings on page 34 according to the varying conditions of your listening environment 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit H 2 Press MENU on the remote control The SET MENU screen appears on your TV MENU EG Push CENTER to Save e gt H T Cal 09 Ure Dour CENTER Enter Press ENTER again The new parameters are saved as MEMORY 1 Once the parameters are The control buttons used for SET MENU are displayed on saved the display returns to the SET MENU screen the bottom of the screen To return to the previous screen while using SET MENU press RETURN on the remote control To cancel the SET MENU screen press MENU once more MEMORY Saving You can also perform the following operati
16. into the battery compartment Make sure you insert the batteries according to the polarity markings 3 Close the battery cover Notes Change all of the batteries if you notice the following conditions the operation range of the remote control decreases the indicator does not blink or its light becomes dim Do not use old batteries together with new ones Do not use different types of batteries such as alkaline and manganese batteries together Read the packaging carefully as these different types of batteries may have the same shape and color Exhausted batteries may leak If the batteries have leaked dispose of them immediately Avoid touching the leaked material or letting it come into contact with clothing etc Clean the battery compartment thoroughly before installing new batteries Do not throw away batteries with general house waste Dispose of them correctly in accordance with your local regulations The contents of the memory stored in the remote control may be erased in the following cases The remote control is left without batteries for more than 2 minutes Exhausted batteries remain in the remote control The buttons on the remote control are accidentally pressed when you change batteries If the memory stored in the remote control is unwantedly erased insert new batteries and reset the remote control codes again 22 En E a Remove the transparent sheet before using the r
17. on your TV Start the AUTO SETUP procedure from f there are curtains in your listening room we recommend step 6 following the procedure below You can also perform the following operations in the front 1 Open the curtains to improve sound reflection panel display 2 Run BEAM OPTIMZ only eee Press A V onthe remote control to select 4 Run SOUND OPTIMZ only You can save the settings optimized by the AUTO SETUP procedure see page 34 A set of settings optimized according to specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment see page 35 AUTO SETUP and then press ENTER The following screen appears on your TV 1 Press STANDBY ON on the front panel or on the remote control to turn on the power of this unit If a subwoofer is connected to this unit turn on the power of the subwoofer Ly or STANDBY Front panel Remote control Ue Dorn ENTER Enter 2 Set the operation mode selector to YSP to switch to the operation mode of this unit 30 En 9 Press A V to select BEAM SOUND OPTIMZ BEAM OPTIMZ only or SOUND OPTIMZ only and then press ENTER The following screen appears on your TV BEAM SOUND OPTIMZ Beam optimization and sound optimization Use to optimize the beam angle delay volume and quality so that the parameters best match your listening environment Itis recommended tha
18. vsP The batteries in the remote control may be week if the remote control does not function properly In such case replace all the batteries and then try the procedure again during the test tones are being output 2 Press and hold MY BEAM on the remote control more than 2 seconds A test tone is output twice from this unit Keep pointing the remote control toward this unit during the test tones are being output so that the my beam microphone can collect the test tones Control range L50 to R50 Operation guarantee range 6 m L30 to R30 MY BEAM 47 En PLAYING BACK SOUND CLEARLY My beam Using manual adjust function You can adjust the beam angle manually while playing back an input source This function is also ideal if the listening position is out of the operation guarantee range of the auto adjust function 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit TVAV YsP 1 2 Press MY BEAM on the remote control MY BEAM is displayed in the front panel display MY BEAM Press lt gt while MY BEAM is displayed to adjust the angle Control range L90 to R90 Press repeatedly to increase the horizontal angle on the left side Press gt repeatedly to increase the horizontal angle on the right side 48 En USING SOUND FIELD PROGRAMS This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi channel pl
19. 3 is displayed Run the MANUAL SETUP if the problem is difficult to be saved Volume level is lower than expected Please check MIC position connection and re try the sound produced by this unit because the sound output level is too low See Error message Cause Remedy page ERROR E 1 There is too much unwanted noise in Make sure that your listening room is as Please test in quieter environment your listening room quiet as possible You may want to choose certain hours during the day when there is not much noise coming from outside ERROR E 2 The optimizer microphone was Make sure that the optimizer microphone 28 No MIC detected Please check disconnected while the AUTO SETUP is firmly connected to this unit MIC connection and re try procedure was in progress ERROR E 3 Some other operations were performed Do not perform any other operations Unexpected control is detected on this unit while the AUTO SETUP while the AUTO SETUP procedure is in Please re try procedure was in progress progress ERROR E 4 The optimizer microphone is not placed Make sure that the optimizer microphone 28 Please check MIC position MIC in front of this unit is installed in front of this unit should be set in front of YSP ERROR E 5 The optimizer microphone is not placed Make sure that the optimizer microphone 28 Please check MIC position MIC in the right distance from this unit is installed more than 1 8 m from the sh
20. IntelliBeam procedure to adjust the settings that This unit employs the YAMAHA IntelliBeam technology with the aid of the supplied optimizer microphone allowing you to achieve highly accurate sound adjustments that best match your listening environment Be advised that it is normal for loud test tones to be output during the AUTO SETUP procedure Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress Press STANDBY ON on the remote control The power of this unit turns on Q STANDBY ON POWER POWER If a subwoofer with adjustable volume and crossover high cut frequency controls is pu connected to this unit set the volume HIGH CUT between 10 and 12 o clock as viewed on a conventional clockface and set the crossover high cut frequency to the maximum MN Sig Subwoofer Turn on the power of your TV Select the appropriate video input on your TV Set the operation mode selector to YSP LEVEL e TV AV_ e Press and hold AUTO SETUP for more than 2 seconds If the menu screen does not appear check the video pin cable connection 8 in the diagram on front page is connected properly and then press YSP followed by MEN Bane INPUT1 INPUT MACRO c 63 C3 C3 The menu screen appears on the TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST AM Check the following points s the optimizer microphone
21. Prohibit appears in the front panel display when you press SURROUND on the remote control The surround modes are available only when 2 channel signals are being input If you try to switch between the surround modes when 5 1 channel signals are being input Prohibit appears in the front panel display ENJOYING SURROUND SOUND Enjoying 2 channel sources in surround sound This unit can decode 2 channel sources for 5 1 channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode The surround modes available only when the CINEMA DSP programs are turned off see page 51 or when the movie program is selected as the CINEMA DSP program see page 50 In addition the beam mode must be set to the 5 beam the stereo plus 3 beam or the 3 beam see page 40 5BEAM ST 3BEAM STEREO BEAM SURROUND DEE MUSIC MOVIE SPORTS 7 2 OFF ce CO CH LEVEL MENU OCA En 06 1 Set the operation mode selector to YSP to switch to the operation mode of this unit TVA YsP Press SURROUND the remote control repeatedly or press SURROUND and then press 4 gt to switch between surround modes SURROUND SURROUND Example of the surround mode display in the front panel display when the CINEMA DSP program is turned off 43 En je D m gt 9 z w gt
22. Subwoofer set Use to manually adjust various subwoofer settings L DISTANCE m 0 4314De1 5el Return BASS OUT Bass out Low frequency bass signals can be directed to the subwoofer and or the front left and right channels This setting also determines the routing of LFE low frequency effect signals found in Dolby Digital or DTS sources Choices SWFR subwoofer FRONT Select SWFR if you connect a subwoofer LFE and low frequency signals from other channels are directed to the subwoofer Select FRONT if you do not use a subwoofer LFE and low frequency signals from other channels are directed to the front left and right channels CROSS OVER Cross over When BASS OUT is set to SWFR you can use this feature to select a cross over cut off frequency for all low frequency signals All frequencies below the selected frequency will be sent to the subwoofer speaker position Choices 80Hz 100Hz 120Hz LFE LEVEL Low frequency effect level Select to adjust the output level of the LFE low frequency effect channel according to the capacity of your subwoofer The LFE channel carries low frequency special effects which are only added to certain scenes This setting is effective only when this unit decodes Dolby Digital or DTS signals Choices 20 to 0 dB DISTANCE Distance Select to adjust the distance of the subwoofer from the listening position Choices 0 3 to 15
23. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP on the remote control for more than 2 seconds In this case this unit performs both of the beam optimization and sound optimization procedures Optimizer M microphone Center line B Assembling the supplied cardboard microphone stand You will find three separate parts one circular shaped part and two longitudinal shaped parts of the cardboard microphone stand originally put together 0 0 D STANDBY ON POWER POWER 00 Go 9 S5 G9 INPUTi INPUT2 MACRO w ee er VOL MODE EO INPUTMODE SLEEP 5BEAM ST 3BEAM 3BEAM 3 4 a ec 7 OFF 9 9 e TAY ry 1 Disassemble the three parts of the cardboard i UN n microphone stand originally put together Cv 2 Insert one of the longitudinal shaped part into the crevice of the other longitudinal shaped part 3 Place the circular shaped part on top of the two combined longitudinal shaped parts 4 Place the supplied optimizer microphone on top of the circular shaped part 29 En AUTO SETUP IntelliBeam Notes 3 Press MENU on the remote control Make sure that your listening room is as quiet as possible while The SET MENU screen appears on your TV th
24. as a result RETURN to cancel the results The following screen is displayed temporarily for 2 seconds and then disappears from your TV If ENVIRONMENT CHECK FAILED is displayed in step 8 the following screen is displayed after pressing ENTER In this case see ERROR E 1 in Error messages for AUTO SETUP on page 33 Press ENTER to exit the AUTO SETUP and then run the procedure again from step 3 32 En AUTO SETUP COMPLETE enove the MIC from and the listening AUTO SETUP COMPLETE nit mas not be set mend you bra again ress CENTER key to 10 Disconnect the optimizer microphone from the OPTIMIZER MIC jack on the front panel E B Error messages for AUTO SETUP Before the AUTO SETUP procedure starts No MIC Detected Please check MIC connection and re try connected to this unit this unit ee Error message Cause Remedy gt page ERROR E 2 The optimizer microphone is not Connect the optimizer microphone to 28 While the AUTO SETUP procedure is in progress If one of the errors shown below except E 1 is displayed press RETURN In case you have started the AUTO SETUP procedure by pressing AUTO SETUP on the remote control in step 3 run the procedure again from step 3 after once the screen disappears In case you have started the AUTO SETUP procedure by pressing MENU on the remote control in step 3 run the procedure again from step 4 after the screen in step
25. controls is connected to this unit set the volume between 10 and 12 o clock as viewed on a conventional clockface and set the crossover high cut frequency to the maximum VOLUME CROSSOVER HIGH CUT f 7 MIN MAX MIN MAX N Subwoofer 1 Press STANDBY ON on the front panel or on 3 Place the optimizer microphone on a flat the remote control to turn off the power of level surface more than 1 8 m 6 0 ft from the this unit front of the unit and within 1 m 3 3 ft upper or lower from the center height of the unit Ly or with the optimizer microphone head upward STANDBY S at your normal listening position Front panel Remote control Note Be sure to place the optimizer microphone on an imaginary center line drawn from this unit 2 Connect the supplied optimizer microphone 2 2 OPTIMIZER MIC 1 front You may want to use the supplied cardboard microphone stand to affix the optimizer microphone at the same height as your ears would be when you are seated in your listening position Optimizer S ms L microphone 1 panc 1 m 3 3 ft 0 upper or lower n 1 8 m 6 0 ft from the center Cardboard microphone stand Sofa 28 En AUTO SETUP IntelliBeam Using AUTO SETUP IntelliBeam Once the optimizer microphone is firmly connected to this unit and properly placed in your listening room follow the procedure below to start the AUTO SETUP procedure
26. disconnect the optimizer microphone The optimizer microphone is sensitive to heat Keep it away from direct sunlight Do not place it on top of this unit Do not connect the optimizer microphone to an extension cable as doing so may result in an inaccurate sound optimization An error may occur during the AUTO SETUP procedure if the optimizer microphone is not properly placed in your listening room To avoid the possibility of an error Do not place the optimizer microphone to the extreme right or left from the center of this unit Do not place the optimizer microphone within 1 8 m 6 0 ft from the front of this unit Do not place the optimizer microphone more than 1 m 3 3 ft upper or lower from the center height of this unit Make sure that there are no obstacles between the optimizer microphone and the walls in your listening room as these objects obstruct the path of sound beams However any objects that are in contact with the walls will be regarded as a protruding part of the walls The best possible results are achieved if the optimizer microphone is placed at the same height as your ears would be when you are seated in your listening position However if this is not possible you can manually fine tune the sound beam angle and balance the sound beam output levels using MANUAL SETUP see page 57 once the AUTO SETUP procedure is completed f a subwoofer with adjustable volume and crossover high cut frequency
27. listening position from all directions The YSP 900 projects sound beams containing surround sound information for the front right R front left L surround right SR and surround left SL speaker positions which are reflected off the walls of your listening room before reaching the actual listening position With the addition of center C sound beams this Digital Sound Projector creates true to life 5 1 channel surround sound that makes you feel as if there are actual speakers around the room Sit back and enjoy the real sound experience of this simple yet stylish Digital Sound Projector Imaginary front right speaker Imaginary Imaginary surround right ker front left speake speaker Imaginary center speaker Listening position Imaginary surround left speaker 2 En FEATURES Digital Sound Projector This unit employs the digital sound projector technology that allows one slim unit to control and steer multiple channels of sound to generate multi channel surround sound thus eliminating the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems This unit is also equipped with the following beam modes so that you can enjoy the surround sound 5 beam Stereo plus 3 beam 3 beam This unit also employs the stereo playback and my beam My beam This unit employs the my beam so that you can achieve a clear sound in noisy environment You can adjust the
28. on the remote control ST 3BEAM STEREO BEAM SURROUND MUSIC MOVIE SPORTS CH LEVEL MENU Bes lt gt B Music program Select this sound field program when you play music sources This program produces a vibrant atmosphere and lets you feel as if you are seated in an actual rock or jazz concert hall 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit 2 Press MUSIC on the remote control to select the music sound field program MUSIC 50 En B Movie program Select this sound field program when you play movie sources especially the ones encoded in Dolby Digital DTS or Dolby Surround This program clearly reproduces dialog and sound effects thus creating a broad and expansive cinematic space amid silence 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit T 2 Press MOVIE on the remote control to select the movie sound field program MOVIE B Sports program Select this sound field program when you play sports sources This program densely concentrates the vocal sound of the commentator in the center while broadening the sound from the audience or the environment all around your listening room 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit 2 Press SPORTS on the remote control to select the sports sound field program SPORTS USING SO
29. optical cable in the supplied cable clamp see page 14 Note If your TV and tuner connected to this unit do not support digital broadcasting connect the analog audio output jacks TV STB R L on this unit to the analog audio output jacks on your TV TV Analog audio output R Digital satellite tuner or a cable TV tuner i Analog audio output L tt Optical digital output I Video signal to a TV Rear panel of this unit TV STB SUBWOOFER VIDEO VCR AUDIO INPUT OUT Cables used for connections Optical cable supplied Hime 18 En TV STB White I Red OPTICAL DIGITAL INPUT DVD COAXIAL AUX Audio pin cable El White Red CONNECTIONS Connecting other external components To connect other external components connect the optical digital output jack on the component to the optical digital input jack AUX OPTICAL on this unit You can connect a DVD player recorder or a component that supports optical digital connections Mz AOA To prevent the optical cable from being unplugged affix the optical cable in the supplied cable clamp see page 14 Game console etc i Video signal to a TV Optical digital output D Te H 4S ELT
30. screen 66 En MANUAL SETUP B OSD SET OSD settings DI SP LAY MEN U Use to adjust the display position and the background color of OSD Use to manually adjust various parameters related to the display SET MENU MANUAL SETUP DISPLAY MENU OSD SHIFT 050 BACK COLOR L amp l 2Del lg4Doun D41 4DR1 581 CENTER Return CUNIT SET La amp l De1 ure zDoun CENTER Enter OSD SHIFT OSD shift Use to adjust the vertical position of the OSD Adjust B DIMMER SET Dimmer settings towards the minus direction to raise the position of the Use to adjust the brightness of the front panel display OSD and adjust towards the plus direction to lower it Choices 5 to 5 Initial setting 0 OSD BACK COLOR OSD background color i Use to select the background color of the OSD LAleDr iez Doun 41 e1 5e1 Choices BLUE GRAY CENTER Return UNIT SET Unit settings Use this to change the display unit of measurement STANDARD DIMMER Standard dimmer Choices METERS FEET Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control Choices 22 1 OFF AUTO DIMMER Auto dimmer If no operation is performed for a specified period the front panel display dims Use to adjust the brightness of the front panel display in this case Choices OFF the same brightness as the STANDARD DIMM
31. see page 60 Room width and length IUH FLAT TO WALL Listening position from the _ unit and the left wall Lal Dr iUe Doun Cale Sel CENTER Return a lt r i Sel CENTER Return INSTALLED POSITION Installed position of this unit Use to adjust the installed position of this unit Choices FLAT TO WALL Parallel to wall installation ANGLE TO WALL OR CORNER Corner installation gt m E 5 5 m ANGLE TO WALL FLAT TO WALL OR CORNER CD 59 En MANUAL SETUP Select ANGLE TO WALL OR CORNER if this unitis BEAM ADJUSTMENT Beam adjustment installed in the corner in your listening room Adjust Use to manually adjust the various beam settings We the width and length of your listening room as well as recommend that you select 5 beam as the beam mode the distance of the listening position from this unit before adjusting these parameters Listening position from the unit Notes When INSTALLED POSITION is adjusted in MANUAL SETUP see page 59 the factory default value is automatically set for this parameter except CENTER in FOCAL LENGTH see page 61 Depending on the beam mode settings see pages 40 and 46 some channel positions may not be available for selection In this case is displayed When using the stereo plus 3 beam as the beam mode set the surround left and right signals to be output from the front left and right channels
32. set to minimum channels No sound from the subwoofer BASS OUT in SUBWOOFER SET isset Select SWFR 63 to FRONT The source does not contain low bass signals 82 En TROUBLESHOOTING See Problem Cause Remedy page Distorted or too little bass sound CROSS OVER in SUBWOOFER SET is Set CROSS OVER correctly 63 set incorrectly One of the night listening modes is Turn off the night listening modes 52 currently selected Too much bass sound TruBass is currently turned on Turn off TruBass 54 The volume level of the subwoofer is too Turn down the volume level of the __ high subwoofer Surround sound effects are The listening room is not a regular shape Install this unit in a square or rectangular insubstantial shaped room There is no wall in the path of the sound Try placing a flat object such as a board beam in the path of the sound beam Dolby Digital or DTS sources The connected component is not set to Make an appropriate setting following cannot be played Dolby Digital or output Dolby Digital or DTS digital the operating instructions for your DTS indicator does not light up in signals component the front panel display The input mode is set to ANALOG Set the input mode to AUTO 71 There is noise interference when a The protection circuitry was in operation Turn down the volume level 39 subwoofer i
33. the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED Make sure that neither core is connected to the earth terminal of the three pin plug CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure CONTENTS INTRODUCTION OVERVIEW cscsccsssssrsessrcessssssessesecsrsassrsesecsesesseee 2 FEATURES E USING THIS MANUAL eeeeeen en tntn nnno 4 SUPPLIED ACCESSORIES 5 CONTROLS AND FUNCTIONS Front panel Front panel display Rear panel Remote control PREPARATION INSTALLATION eere reete eene ennt tnntnatnan 11 Before installing this unit sess 11 Installing this 11 CONNECTIONS 14 Connecting a TV Connecting a DVD player recorder Connecting a 17 Connecting a digital satellite tuner or a cable TV tuner sese 18 Conn
34. the remote control other than the ones used to set macros while setting macros the setting procedure is automatically canceled If it takes more than 10 seconds in steps 2 and 3 the setting procedure is automatically canceled In this case repeat from step 1 p STANDBY ON POWER POWER OO ves s 05 INPUT1 INPUTZ MACRO v O O 05 VOL mone So INPUTMODE SLEEP CJ C O O 5BEAM ST 3BEAM 3BEAM C C2 Js STEREO MY BEAM SURROUND CH LEVEL MENU O Yet TV AV 9r TVINPUT TV MUTE CI C CODE SET 80 En B Setting macros for the TV with the tuning capability 1 Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for Proceed to step 2 while holding down CODE SET TV MUTE While holding down press CODE SET 2 Press MACRO on the remote control while holding down CODE SET TV MUTE CODE SE 3 Press CH or the numeric buttons to select the TV channel Check that the TV screen changes to the tuner screen While holding ACEO down press 5BEAM ST 3BEAM 3BEAM STEREO SURROUND or MUSIC MOVIE SPORTS 4 Press TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1 TV INPUT 5 Press ENTER on the re
35. to return to the previous DVD menu screen or exit the DVD menu 9 TV AV TV VOL Adjusts the volume level of the TV see page 78 CH Switches between channels of the TV or the VCR see pages 78 and 79 63 TV MUTE CODE SET Mutes the audio output of the TV see page 78 Use to set up remote control codes see page 77 10 En INSTALLATION This section describes a suitable installation location to install the unit using a metal wall bracket a rack or a stand Before installing this unit Installing this unit This unit creates surround sound by reflecting projected Install this unit where there are no obstacles such as sound beams off the walls of your listening room The furniture obstructing the path of sound beams Otherwise surround sound effects produced by this unit may not be the desired surround sound effects may not be achieved sufficient when the unit is installed in the following You may install this unit in parallel with the wall or in the locations corner Rooms with surfaces inadequate for reflecting sound Parallel installation Install this unit in the exact center of the wall when it is measured from the left and right corners beams Rooms with acoustically absorbent surfaces Rooms with measurements outside the following range W 3to 7 m x H 2 to 3 5 m x D 3 to 7 m Rooms with less than 1 8 m from the listening position to the speaker positions Rooms where objects such as furniture
36. 0 2 CSE STEREO MY BEAM S TV MUTE CODE SET amp YAMAHA Infrared window Outputs infrared control signals Aim this window at the component you want to operate STANDBY ON Sets this system to the standby mode see page 23 3 Transmission indicator Lights up when infrared control signals are being output Input selector buttons Use to select an input source STB VCR DVD AUX or TV Use to change the control area of the remote control 69 TV AV VOL MODE Turns on or off the volume modes see page 52 6 AUTO SETUP Use to enter the AUTO SETUP menu see page 27 Numeric buttons Use to enter numbers 9 TV AV STEREO Use the playback sources in 2 channel stereo see page 46 9 Sound field program buttons Use to select sound field programs see page 49 CH LEVEL Adjusts the volume level of each channel see page 69 Cursor buttons A Y P ENTER Use to select and adjust SET MENU items Use to select DVD menu items 09 TV AV TEST Outputs a test tone when adjusting the output level of each speaker see page 68 VOLUME 4 Increases or decreases the volume level of this unit see page 39 MUTE Mutes the sound Press again to restore the audio output to the previous volume level see page 39 TV INPUT Switches the input source or the TV see page 78 DVD pl
37. 0 m Initial setting 3 0 m 63 En 9 m E 5 5 m MANUAL SETUP MUTE LEVEL Muting level Use to adjust how much the mute function reduces the volume level Choices MUTE 20 dB Select MUTE to completely halt all sound output Select 20 dB to reduce the current volume level by 20 dB BUTE Lalele Select T Return AUDIO DELAY Audio delay Use to delay the sound output and synchronize it with the video image This may be necessary when using certain LCD monitors or projectors Choices 0 to 160 msec AUDIO DELAY Gmsec B ROOM EQ Room equalizer Use to change the tonal qualities of your listening room when the unit is mounted on the wall Choices MOUNTING Mount type REFLECTING Reflectivity type MOLHTIHG HELF REFLECTING HORMAL Lali Uer D414De1 581 2 MOUNTING Mount type Use to enhance medium to low range sounds Choices WALL Wall mount SHELF Shelf mount Select WALL if this unit is mounted on the wall in your listening room Select SHELF if this unit is mounted on the shelf in your listening room REFLECTING Reflectivity type Use to select the reflectivity of your listening room Choices NORMAL Normal HI ECHO High echo Select NORMAL if your listening room has a normal reflectivity Select HI ECHO if your listening room has highly reflective surfaces such as concrete w
38. 4 BYD SIGN 678 679 DAEWOO 655 DENON 623 624 682 FUNAI 625 HARMAN KARDON 656 657 HITACHI 626 JVC 627 KENWOOD 628 KLH 658 LG GOLDSTAR 645 663 664 MARANTZ 699 659 MITSUBISHI 629 ONKYO 632 633 634 PANASONIC 623 635 668 672 682 683 684 PHILIPS 699 647 659 PIONEER 636 637 638 673 674 675 685 686 687 RCA 639 SAMSUNG 642 SHARP 643 SONY 644 676 677 SYLVANIA 662 SYMPHONIC 662 THOMSON 646 TOSHIBA 634 665 666 667 YAMAHA 699 622 623 647 682 ZERITH 663 664 VCR ADMIRAL 395 AIWA 396 397 398 329 AKAI 322 323 324 AUDIO DYNAMIC 392 394 BELL amp HOWELL 393 BLAUPUNKT 325 326 BROC SONIC 327 BUSH 322 CANON 325 328 CGM 396 332 CITIZEN 396 CRAIG 396 363 CURTHIS MATHIS 397 328 333 DAEWOO 328 334 335 DBX 392 394 DIMENSIA 333 DYNATECH 397 EMERSON 327 334 396 397 FISHER 393 336 FUNAI 397 GE 328 333 387 GO VIDEO 321 331 341 351 353 363 GOODMANS 334 337 GRUNDIG 332 338 HITACHI 325 333 349 342 343 INSTANT REPLAY 325 328 ITT NOKIA 393 JC PENNY 392 393 394 328 333 349 396 363 JVC 392 394 344 345 346 347 KENDO 396 KENWOOD 392 394 396 LG GOLDSTAR 396 388 LOEWE 396 337 LUXOR 395 LXI 393 396 397 336 349 MAGNAVOX 325 326 328 MARANTZ 392 394 MARTA 396 MATSUI 396 MEMOREX 328 336 396 397 MINOLTA 333 349 MITSUBISHI 399 344 348 359 353 352 MTC 363 397 MULTITECH 397 348 354 NEC 392 304 344 383 NOKIA 393 395 NOKIA OCEANIC
39. 6 Change the beam modes and or CINEMA DSP settings See ENJOYING SURROUND SOUND on page 40 If you want to make additional settings and adjustments Run MANUAL SETUP to fine tune settings and or set remote control codes See MANUAL SETUP on page 57 and REMOTE CONTROL FEATURES on page 77 4 En SUPPLIED ACCESSORIES Check that you have received all of the following parts Remote control x1 Batteries x2 AA R6 UM 3 STANDBY ON Optical cable x1 o VOL MODE SETUP sess OSD video pin cable x1 Digital audio pin cable x1 SBEAM STs3BEAM 2 e g O Z POWER 0 E STEREO SURROUND MUSIC SPORTS Yellow Orange Optimizer microphone x1 Audio pin cable x1 MUTE TVINPUT TVMUTE c Cm en White Red Cable clamp x1 Fasteners x4 YAMAHA al Cardboard microphone stand x1 5 En CONTROLS AND FUNCTIONS Front panel e 8 F71 5 c STANDBY ON O B VOLUME C OPTIMIZER MIC jack Use to connect the supplied optimizer microphone to be used to run AUTO SETUP see page 28 Front panel display Shows information about the operational status of this unit 3 Remote control sensor Receives infrared signals from the remote control INPUT Press repeatedly to switch between input sources TV VC
40. 7 224 239 232 FURGUSON 223 265 266 FIRST LINE 298 FISHER 295 233 FRABA 298 FUJITSU 289 FUNAI 277 278 GE 293 297 234 235 236 GOODMANS 296 298 223 GRUNDIG 229 238 249 HITACHI 297 239 242 243 285 206 ICE 296 IRRADIO 296 ITT NOKIA 244 245 JC PENNY 293 297 234 237 JVC 296 246 247 286 KENDO 298 KTV 297 239 LG GOLDSTAR 297 298 239 237 LOEWE 298 248 LXI 293 297 225 226 233 298 MAGNAVOX 297 225 239 298 MARANTZ 298 210 MATSUI 295 MEDION 203 204 298 MEMOREX 297 216 MITSUBISHI 299 297 259 287 NAD 226 255 NEC 297 252 282 NOKIA 244 245 NOKIA OCEANIC 245 NORDMENDE 265 266 ONWA 296 PANASONIC 234 235 236 253 288 211 PHILCO 297 225 239 298 PHILIPS 298 225 205 PIONEER 226 235 254 255 268 PORTLAND 297 256 PROSCAN 293 221 PROSCAN 231 241 25 PROTON 297 250 260 270 QUASAR 234 235 RADIO SHACK299 293 297 RCA 293 297 234 256 257 258 221 RUNCO 220 230 27 SABA 223 269 265 266 SAMPO 281 297 280 SAMSUNG 297 239 248 262 275 SANYO 295 233 279 272 273 274 212 SCHNEIDER 296 SCOTT 297 SHARP 292 239 232 213 SIEMENS 229 SIGNATURE 216 SIGNATURE 292 SONY 263 214 SYLVANIA 297 225 298 SYNPHONIC 217 218 219 TELEFUNKUN 269 264 265 266 THOMSON 223 266 TOSHIBA 292 226 267 215 VIDECH 297 242 WARDS 297 239 232 216 YAMAHA 299 292 242 285 287 253 206 ZENITH 216 261 271 DVD PLAYER AIWA 648 649 APEX DIGITAL 652 653 65
41. ER setting 1 to 3 based on the STANDARD DIMMER setting DISPLAY OFF Select METERS to input distances in meters Select FEET to input distances in feet Note If you change this setting the adjusted beam settings may change 35 s aS m 20 67 En ADJUSTING THE AUDIO BALANCE You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true to life surround sound experience Using the test tone 3 Press A 7 to select the channel you want to adjust You can use the test tone feature to output a test tone from The front panel display changes as follows each channel to manually balance the channel levels Use the test tone to set channel levels so that the volume level of each channel is identical when heard from your listening position CH LEVEL MENU o qw ern TEST NS C OK v 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit Note TEST SWFR is only available when a subwoofer is connected to E 4 this unit and SWFR is selected for BASS OUT in SOUND 4 MENU see page 63 4 Press lt gt to adjust channel volumes 2 Press TEST on the remote control TEST FRONT L appears in the front panel display and a test tone is output from the front left channel TEST Control range 10 dB to 10 dB 68 En
42. LEEP indicator disappears from the front panel display indicating that the sleep timer is deactivated SLEEP Disappears Note The previous setting for the sleep timer before you deactivate it is stored in the system memory and automatically restored when you make a new setting next time ala AOA The sleep timer setting can also be deactivated if you press STANDBY ON on the front panel or on the remote control to set this unit to the standby mode or unplug the power supply cable from the AC outlet 56 En MANUAL SETUP To achieve the best quality surround sound you can use MANUAL SETUP to fine tune the listening environment parameters as well as to make advanced settings for sound signals sound beams digital input and the OSD Change the initial settings indicated in bold under each parameter to reflect the needs of your own listening environment Mou AOA e You can save the settings optimized by the AUTO SETUP procedure see page 34 A set of settings optimized according to specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment see page 35 Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP see page 27 Use SOUND MENU and BEAM MENU to make additional adjustments BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu
43. Make settings for the parameters in BEAM MENU first before you make settings for the parameters in SOUND MENU INPUT MENU and DISPLAY MENU SOUND MENU Use to manually adjust various parameters related to the sound output Item Features Page TONE CONTROL Adjusts the output level of high frequency or low frequency sound 63 SUBWOOFER SET Adjusts the various subwoofer settings 63 MUTE LEVEL Adjusts the muting level 64 AUDIO DELAY Adjusts audio delay 64 ROOM EQ Adjusts the tonal quality of the listening room 64 DD DTS Dynamic Range Adjusts the dynamic range of Dolby Digital or DTS signals 64 BEAM MENU Use to manually adjust various parameters related to the sound beam output Item Features Page SETTING PARAMETERS Adjusts listening room and listening position settings 59 BEAM ADJUSTMENT Adjusts various beam settings 60 IMAGE LOCATION Adjusts the sound position of the front left and right channels 62 INPUT MENU Use to manually adjust various parameters related to the audio and video input Item Features Page INPUT ASSIGNMENT Assigns jacks according to the component to be used 65 INPUT MODE Selects the initial input of the source 65 INPUT TRIM Adjusts the input level of the source 65 INPUT RENAME Renames the displayed input source 66 DISPLAY MENU Use to manually adjust various parameters related to the display Item Features Page DIMMER SET Adjusts the brig
44. Press b to switch between PRESET RESET and PRESET CANCEL Select PRESET RESET to reset all of the current settings Select PRESET CANCEL to cancel the resetting procedure 6 Press STANDBY ON on the front panel to set this unit to the standby mode Cy The new setting will be activated when you turn on the power of this unit next time 76 En REMOTE CONTROL FEATURES In addition to controlling this unit the remote control can also operate other A V components made by YAMAHA and other manufacturers To control other components you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV AV to change the control area Note Depending on the external A V component you are using you may not be able to operate the component with the remote control even if a remote control code is set In this case operate the component using the supplied remote control Setting remote control codes 2 Press the numeric buttons to enter the f remote control code while holding down You can control other components by setting the CODE SET appropriate remote control codes Codes can be set up for each input area TV STB DVD VCR and AUX Setting example YAMAHA DVD input area For a complete list of available remote control codes refer E to LIST OF REMOTE CONTROL CODES at the end of this manual TV MUTE ah While holding SPORTS down press INPU
45. R DVD or AUX See page 37 for details Outputs a test tone to experience the sound beam see page 68 5 VOLUME Controls the volume level of all audio channels see page 39 6 n STANDBY ON Turns on the power of this unit or sets it to the standby mode see page 23 Notes When you turn on the power of this unit you will hear a click and there will be a 4 to 5 second delay before it can reproduce sound n the standby mode this unit consumes a small amount of power in order to receive infrared signals from the remote control CONTROLS AND FUNCTIONS Front panel display D 2 dits PCM OODIGITAL DUPLI z 2 e g O Z NIGHT indicator Volume level indicator Lights up when one of the night listening modes is Shows the current volume level see page 39 lected 52 selected see page 32 Multi information display SLEEP indicator Shows information when you adjust the parameters of this Lights up when the sleep timer is turned on see page 55 unit 8 Decoder indicators You can adjust the brightness of the front panel display using the DISPLAY MENU parameters in MANUAL SETUP see page 67 Light up when the corresponding decoder of this unit is in operation see page 42 T En CONTROLS AND FUNCTIONS Rear panel Europe model pm VCR TV STB SUBWOOFER VIDEO um AUDIO INPUT OUT TV STB
46. T1 INPUTZ MACRO SPORTS v VOLMODE SETUP INPUTMODE SLEEP C 5BEAM ST 3BEAM 3BEAM DB STEREO BEAM SURROUND 3 4 Refer to Controlling other components on MUSIC MOVIE SPORTS page 78 to operate the external component 7 Ls using the remote control ro If the external component functions correctly the TEE remote control code setup was successful If the external component does not function correctly the remote control code may be incorrect Confirm Qi that the remote control code is correct see LIST OF REMOTE CONTROL CODES at the end of this manual and start over from step 1 Note Oo 0 E E If the manufacturer of your component has more than one code m Z MUTE TVINPUT TVMUTE try each of them until you find the correct one gt O Cs zo If the remote control is without batteries for more than 1 BrosssdholdGoDESETomnilelambH 2 minutes or if exhausted batteries remain in the Press and hold CODE SET on the remote remote control the contents of the memory may be control and then press one of the input cleared When the memory is cleared insert new selector buttons to select the input source batteries and reset the remote control codes you want to set a remote control code for When changing the batteries be careful not to press The transmission indicator flashes twice and then any of the buttons on the remote control Doing so will remains lit clear the c
47. TUP Select FLAT TO WALL if this unit is installed in BEAM M Ei N U parallel with the wall in your listening room Adjust the width and length of your listening room as well as the distance of the listening position from this unit and the distance of the center of this unit from the left wall Use to manually adjust various parameters related to the sound beam output SET MENU MANUAL SETUP BEAM MENU Listening position from the left wall Listening position Room length from the unit E A You can adjust the sound beam output level of each channel in ADJUSTING THE AUDIO BALANCE see page 68 Room width SETTING PARAMETERS Choices for the room width and length Setting parameters es Choices for the listening position from this unit Use to set the position of this unit in your listening room and the distance of this unit from the listening position Ch 18 we A i ition f he left wall When you make settings for each parameter other related ots S position wat 6 mto 11 4m parameters are automatically adjusted to best match your listening environment Note If you make adjustments in SETTING PARAMETERS the beam optimization settings made in the AUTO SETUP procedure will TAl Dv Ue Doun Sel be lost If you want to keep the beam optimization settings made ETI Retuno in the AUTO SETUP and make further adjustments adjust settings in BEAM ADJUSTMENT first
48. TUP see page 27 Set this menu only when you changed the Surround R adjusts the focal length for the surround 2 s HORIZONTAL ANGLE see page 60 right sound beams i om B 20 We recommend that you use the initial setting 0 5 m for the center channel Surround Re L amp l Delilez Doun D414 DR1 5e1 LEHTER1 iReturn 61 En MANUAL SETUP TREBLE GAIN Treble gain Use to adjust the high frequency output level of each channel Mou If the reflection point of the front left and right or surround left and right sound beams is a curtain or other acoustically absorbent surface you can achieve more effective surround sound by increasing the treble level for those sound beams Co Co Choices 12 0 dB to 12 0 dB Initial setting 0 dB FL adjusts the high frequency output level of the front left channel FR adjusts the high frequency output level of the front right channel adjusts the high frequency output level of the center channel SL adjusts the high frequency output level of the surround left channel SR adjusts the high frequency output level of the surround right channel Surround R 10 D414LDR1 5e1 LEHTERI Return 62 En B IMAGE LOCATION Image location Use to adjust the direction from which the front left and right channel sound is heard so that the each sound can be heard closer to the center channel Use this feature to redirect
49. These are caused by reflections from more than one surface i e wall ceiling the back of the room etc so numerous that they merge together to form a continuous sonic afterglow They are non directional and lessen the clarity of the direct sound w gt 2 O Direct sound early reflections and subsequent reverberation taken together help us to determine the subjective size and shape of the room and it is this information that the digital sound field processor reproduces in order to create sound fields a m gt a O 2 If you could create the appropriate early reflections and subsequent reverberations in your listening room you would be able to create your own listening environment The acoustics in your room could be changed to those of a concert hall a dance floor or a listening room of virtually any size at all This ability to create sound fields at will is exactly what YAMAHA has done with the CINEMA DSP technology 49 En USING SOUND FIELD PROGRAMS Turning on CINEMA DSP programs You can select from three different sound field programs MUSIC MOVIE and SPORTS depending on the type of sources you want to enjoy Notes The CINEMA DSP programs are not available if the stereo playback see page 46 or the my beam see page 47 is selected as the beam mode If the CINEMA DSP programs are not available Prohibit appears in the front panel display when you press one of the sound field program buttons
50. UND FIELD PROGRAMS Turning off CINEMA DSP programs Adjusting CINEMA DSP effect levels Turn off the CINEMA DSP programs if you want to enjoy You can enjoy good quality sound with the factory preset the original sound without the sound field program effect parameters However you can also adjust the effect level of the CINEMA DSP programs relative to the level of the 1 Setthe operation mode selector to YSP to direct sound so that each sound field program can reflect switch to the operation mode of this unit your listening environment and your preference even more accurately Per iy 1 Set the operation mode selector to YSP to switch to the operation mode of this unit 2 Press OFF on the remote control to turn off E the sound field programs iE 4 CINEMA DSP OFF is shown in the front panel display 2 Press MUSIC MOVIE or SPORTS on the OFF remote control to select the desired sound eh field program MUSIC MOVIE SPORTS o Q 3 Press 7 onthe remote control DSP LEVEL is shown in the front panel display m 0 E O Z 4 Press 4 0 on the remote control to adjust the effect level of the CINEMA DSP programs Control range 6 dB to 3 dB A larger value increases the effect level A smaller value decreases the effect level 51 n USING THE VOLUME MODE Night listening mode TV volume equal mode The night listening modes are designed to improve listenabi
51. VD Coaxial 1 Digital Output Jacks SUBWOOFER OUT 1 5 V less than 120 Hz 1 Subwoofer VIDEO OUT 1 Vp p 75 Q sssseeereere 1 OSD System Connector Jack OPTIMIZER MIC 1 Microphone input GENERAL Power Supply Australia model U K and Europe models China model Korea model AC 240 V 50 Hz AC 230 V 50 Hz AC 220 V 50 Hz AC 220 V 60 Hz AC 110 120 V 50 60 Hz AC 220 240 V 50 60 Hz General model Asia model Power ConsumpllOD 30W e Standby Power Consumption sess 0 1 W or less Dimensions W x x D 800 x 153 x 115 mm Weight 2n 9 0 kg Specifications are subject to change without notice 87 En TWNOILIGGV z O 20 2 LIST OF REMOTE CONTROL CODES LISTE DES CODES DE COMMANDE LISTE DER FERNBEDIENUNGSCODES LISTA OVER FJARRSTYRNINGSKODER LIJST MET AFSTANDSBEDIENINGSCODES TV ADMIRAL 292 293 216 AIWA 294 276 283 284 AKAI 295 296 ALBA 296 AOC 297 BELL amp HOWELL 292 BESTAR 298 BLAUPUNKT 229 222 BLUE SKY 298 BRANDT 223 BROC SONIC 297 BUSH 296 BYD SIGN 201 202 CLATRONIC 298 CRAIG 224 CROSLEX 225 CURTIS MATHIS 297 226 DAEWOO 297 298 224 227 228 DAYTRON 239 DUAL 298 DWIN 293 281 EMERSON 29
52. ack If the PCM indicator lights up confirm the settings of the digital output bitstream output and or DTS output of the DVD player If the output volume is too low increase the volume on this unit to around 45 If you have set the appropriate remote control codes for your TV and DVD player you can use the remote control supplied with this unit to operate these components For details on how to set remote control codes see page 77 PLAYBACK Adjusting the volume Muting the sound VOLUME MUTE TVINPUT TV MUTE CODE SET 1 Press MUTE on the remote control to mute the sound CJ AUDIO MUTE ON appears in the front panel display and the volume level indicator flashes INPUT T VOLUME STANDBY ON MUTE VOLUME MUTE TVINPUT TV MUTE CODE SET Press VOLUME on the front panel or on the remote control to increase or decrease the volume level The numeric value of the volume level appears in the front panel display Control range MIN minimum 01 to 99 MAX maximum 9 l VOLUME 2 Press MUTE on the remote control again or a press VOLUME to resume the sound a O output z AUDIO MUTE OFF appears temporarily in the front panel display or the numeric value of the current volume level appears if you press VOLUME and the volume level indicator lights up L ms m NoLUME Front panel Remote contr
53. ack of this unit Control range 6 0 dB to 0 0 dB Initial setting 3 0 dB Select VCR ANALOG to adjust the level of audio and video signals input at the VCR analog audio input jacks of this unit Control range 6 0 dB to 0 0 dB Initial setting 3 0 dB Select AUX OPTICAL to adjust the level of audio and video signals input at the AUX OPTICAL IN jack of this unit Control range 6 0 dB to 0 0 dB Initial setting 3 0 dB Select DVD COAXIAL to adjust the level of audio and video signals input at the COAXIAL IN jack of this unit Control range 6 0 dB to 0 0 dB Initial setting 3 0 dB 65 En 9 m E 5 5 m B INPUT RENAME Input rename Use to change the name of the input source in the OSD and the front panel display Press an input selector button TV STB DVD VCR or AUX to select the component you want to change the name for and then perform the following procedure 1 Press 4 0 to place the _ underbar under the space or the character you want to edit The _ underbar flashes 2 Press A 7 to select the desired character You can use up to 8 characters for each input Press A to change the character in the following order or press V to go in the reverse order A to Z a space 0 to 9 a space a to z a space etc 3 Repeat steps 1 to 3 to rename each input 4 Press ENTER to exit The new names are registered and the display returns to the previous
54. alls 64 En B DD DTS Dynamic Range Dynamic range of Dolby Digital and DTS signals Use to select the amount of dynamic range compression This setting is effective only when the unit is decoding Dolby Digital and DTS signals Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion Choices MIN minimum STD standard MAX maximum MIH 5 ale LEHTERI R Select to adjust the dynamic range compression Select MIN for listening to sources at low volume levels Select STD for general use Select MAX for feature films MANUAL SETUP INPUT MENU Use to manually adjust various parameters related to the audio and video input SET MENU MANUAL SETUP gt INPUT MENU UT TRIM RENAME B INPUT ASSIGNMENT Input assignment Use to assign the optical and coaxial digital input jacks of this unit to other components if the initial settings of this unit do not correspond to your needs By assigning other components to the input jacks on this unit you can display the name of the connected component in the front panel display and OSD and operate the component with the input selector button of the same name If you connect a component to the input jacks of this unit and do not assign it the default component name for that input jack is displayed in the front panel and OSD when selected Sel
55. and output from the front left and right channels No audio is output from the center and rear channels You can enjoy 2 channel stereo playback by changing the beam mode to the stereo playback using the beam mode buttons on the remote control The normal sounds are output from the front and left channels in the 2 channel The surround mode becomes disabled when the stereo playback stereo This is ideal for playing back hi fi sources such as is selected as the beam mode CDs and can be used to replace your TV speakers When you play back Dolby Digital audio signals in the stereo playback the dynamic range becomes compressed If the TH uL LLL volume level decreases to the extreme use other beam modes VOL MODE SETUP INPUTMODE SLEEP CO except the my beam SBEAM ST 3BEAM If the stereo playback is selected as the beam mode the i surround modes see page 42 and the CINEMA DSP programs ae ee see page 50 become ineffective MUSIC MOVIE SPORTS 0 10 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit 2 Press STEREO on the remote control to select the stereo playback as a beam mode STEREO 46 En PLAYING BACK SOUND CLEARLY My beam You can improve listenability in a noisy environment by changing the beam mode to the my beam outputs sound beams directly to the listening position in a single channel In addition the my beam is also ideal
56. are likely to obstruct the path of sound beams D Te H 4S ELT Rooms where the listening position is close to the walls Rooms where the listening position is not in front of this unit Make sure you leave an adequate amount of ventilation space so that heat can escape Make at least 5 cm of space above or below this unit An object such as furniture Side view P Corner installation Install this unit in the corner at a 40 to 50 angle from the 5 cm or more adjacent walls 40 to 50 Front Rear Notes We do not recommend installing this unit so that it is positioned directly on the floor of your listening room Please install this unit using a metal wall bracket rack or stand This unit weighs 9 0 kg Be sure to install this unit where it will not fall subject to vibrations such as from an earthquake and where it is out of the reach of children When using a cathode ray tube CRT TV do not install this unit directly above your TV This unit is shielded against magnetic rays However if the picture on your TV screen becomes blurred or distorted we recommend moving the speakers away from your TV An object such as furniture 11 n INSTALLATION B Installation examples Example 1 Install this unit as close to the exact center of the wall as possible Example 2 Install this unit so that the sound beams can be reflected off the wal
57. audio signals if the sound coming from the front left and right seems unnatural such as when your listening position is not the center of your listening room You can only adjust this parameter when 3 beam or 5 beam is selected as the beam mode see page 40 Choices ON OFF Setting range 096 to 9596 Initial setting 096 ROH L R LEET RIGHT Cals EF Up Down 41 Di1 5e1 CENTER Return LEFT Left Adjusts audio signals towards the left The higher the percentage the louder the output from the center With the front left channel adjusted Without adjustment RIGHT Right Adjusts audio signals towards the right The higher the percentage the louder the output from the center With the front right Without adjustment channel adjusted Cd MANUAL SETUP SOUND MENU Use to manually adjust various parameters related to the sound output SET MENU gt MANUAL SETUP SOUND MENU JHTROL FER SET Dynamic Range L amp l Drlilez Doun CENTER Enter B TONE CONTROL Tone control You can adjust the tonal quality of the sound beams TREBLE i BASS ee oo 1 0 Down D3414DR1 521 CENTER Return TREBLE Treble Use to adjust the high frequency response Choices 12 dB to 12 dB Initial setting 0 dB BASS Bass Use to adjust the low frequency response Choices 12 dB to 12 dB Initial setting 0 dB SUBWOOFER SET
58. ayback from stereo or multi channel sources This unit is also equipped with a YAMAHA CINEMA DSP digital sound field processing chip containing several sound field programs which you can use to enhance your playback experience Most of the sound field programs are precise digital recreations of actual acoustic environments found in famous concert halls music venues and movie theaters The YAMAHA CINEMA DSP modes compatible with all Dolby Digital DTS and Dolby Surround sources Note Choose a sound field program based on your listening preference and do not purely rely on the name of the sound field program itself What is a sound field A significant factor that creates the rich full tones of a live instrument are the multiple reflections from the walls of the room In addition to making the sound live these reflections enable the listener to tell where the player is situated as well as the size and shape of the room in which the listening is sitting E Elements of a sound field In any environment there are two distinct types of sound reflections that combine with the direct sound coming straight to our ears from the player s instrument to make up the sound field Early reflections Reflected sounds reach our ears extremely rapidly 50 ms to 80 ms after the direct sound after reflecting from one surface only from the ceiling or a wall for example Early reflections help add clarity to the direct sound Reverberations
59. ayer VCR control buttons Use to control the DVD player or the VCR see pages 78 and 79 My beam microphone Use to collect the test tones from this unit when using the my beam auto adjust function see page 48 9 En z 2 e g io z CONTROLS AND FUNCTIONS TV POWER Turns on the power of the TV or sets it to the standby mode see page 78 AV POWER Turns on the power of the selected component or sets it to the standby mode see pages 78 and 79 INPUT1 INPUT2 Selects the input source of the TV see page 78 MACRO Use to set the TV macro see page 80 SLEEP Sets the sleep timer see page 55 INPUTMODE Switches between input modes AUTO DTS or ANALOG See page 71 for details Beam mode buttons Change the beam mode settings see pages 40 46 and 47 SURROUND Selects the surround mode for playback see page 40 MY BEAM Use to select the my beam as the beam mode see page 48 ce TruBass Use to effectively reproduce the bass sound see page 54 MENU Displays the setup menu on your TV monitor see pages 29 and 58 Displays the DVD menu 9 TV AV Operation mode selector Selects the operation mode of this unit Select YSP when operating this unit and select TV AV when operating the TV or other AV components set up the appropriate remote control codes RETURN Use to select sleep timer settings or return to the previous SET MENU screen Use
60. ayer to this unit your TV or DVD player to this unit using appropriate cables as shown below Connecting a subwoofer enhances bass sound for listening enjoyment er information on connecting other components see pages 14 to 20 in the Owner s Manual Cables used for connections Connect cables in the following order D Audio pin cable supplied 2 Optical cable supplied 3 OSD On Screen Display video pin cable supplied 4 Digital audio pin cable supplied 5 DVD video pin cable Subwoofer pin cable in case you connect a subwoofer CAUTION Do not plug the power supply cable into a wall outlet until all connections are complete Unplug the power supply cable before changing connections moving or cleaning this unit DVD player Analog audio output P Coaxial digital output Optical digital output d Video output L R To the AC outlet This unit se If a subwoofer is connected to this unit turn on the power of your subwoofer and then carry out the AUTO SETUP procedure see the backside or VCR TV STB SUBWOOFER VIDEO TVSTB AUX DVD i 4 H select SWFR for BASS OUT in SUBWOOFER OPTICAL COAXIAL lonaural IS A PA RUN input Subwoofer SET see page 63 in the Owner s Manual Connect the optimizer microphone to this unit automatically adjust the variou
61. compression Select Effect Lvl MID for standard compression Select Effect LvI MAX for maximum compression Note The volume mode settings are canceled if you press STANDBY ON on the front panel or on the remote control or if you disconnect the power supply cable from the AC wall outlet m 0 E O 5 En USING BASS SOUND ENHANCER TruBass This unit can produce the perception of an improved low frequency performance with the aid of the SRS TruBass technology which improves bass even without a subwoofer and provides deeper richer bass in the presence of a subwoofer Note The TruBass is not available when the my beam is selected as the beam mode see page 47 2 SEM 3 Press on the remote control repeatedly to select TruBass ON or TruBass OFF STEREO BEAM SURROUND n MUSIC MOVIE SPORTS 56 EVEL MENU T OCZPG 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit Select TruBass OFF to turn off the TruBass EE f O 2 Press 6 onthe remote control The current setting TruBass ON or TruBass OFF is shown in the front panel display ce or 54 En USING THE SLEEP TIMER Use this feature to automatically set this unit to the standby mode after a specified time period The sleep timer is useful if you are going to sleep afte
62. d right channels instead of only 1 surround channel for conventional Pro Logic technology Music and Game modes are also available for 2 channel sources in addition to the Movie mode B Dolby Surround Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects 2 front left and right channels stereo a center channel for dialog monaural and a surround channel for special sound effects monaural The surround channel reproduces sound within a narrow frequency range Dolby Surround is widely used with nearly all video tapes and laser discs and in many TV and cable broadcasts as well The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality B DTS Digital Theater Systems Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 6 channel digital sound track and is now rapidly gaining popularity in movie theaters around the world Digital Theater Systems Inc has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home This system produces practically distortion free 6 channel sound technically a left right and center channels 2 surround channels plus an LFE 0 1 channel as a subwoofer for a total of 5 1 channe
63. ears on your TV and AUTO SETUP procedure starts in 10 seconds the Evacuate yourself from your listening room before starting the AUTO SETUP procedure WILL BEGIN in 1 Please leave the room If an error occurs an error buzzer is played and an error message is displayed See Error messages for AUTO SETUP on page 33 for a complete list of error messages and their proper remedies Follow the instructions and perform the AUTO SETUP procedure again 31 n AUTO SETUP IntelliBeam 8 Checkthat the following screen is displayed on your TV The results of the AUTO SETUP procedure are displayed on your TV EA If ENVIRONMENT CHECK FAILED is displayed we recommend running the AUTO SETUP procedure again For details see step 9 If SUBWOOFER NOT APPLICABLE is displayed even though a subwoofer is connected to this unit increase the volume level of the subwoofer and run the AUTO SETUP procedure again Depending on the environment of your listening room the beam angle of front left and right and surround left and right may be set to the same value even if SBEAM Press ENTER to confirm the results or press Mr Example 1 MEASUREMENT COMPLETE BEAM MODE 5 BEAM SUBWOOFER APPLICABLE CENTER RETURN Example 2 r MEASUREMENT COMPLETE CHECKLFRILED SEAM MODE 5 BEAM DDE t5 7 is displayed
64. ect OPTICAL IN 1 to assign components to the TV OPTICAL IN jack of this unit Choices TV VCR Select OPTICAL IN 2 to assign components to the AUX OPTICAL IN jack of this unit Choices AUX DVD Select COAXIAL IN to assign components to the COAXIAL IN jack of this unit Choices DVD AUX Lad Dr1 Ur INPUT MODE Input mode Use to designate the input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit For information on the types of audio signals that can be output by this unit see Surround modes and recommended sources on page 42 Choices AUTO LAST AUTO LAST Select LEHTER1 Return Select AUTO to allow this unit to automatically detect the type of input signal and select the appropriate input mode Select LAST to set this unit to automatically select the last input mode used for that input source If the type of input signal is different from the setting no sounds will be produced INPUT TRIM Input trim Use to adjust the input level of the input source gt w UCR Bu BUD i Ue ae Sel 1 Return Select ANALOG to adjust the level of audio and video signals input at the TV STB analog audio input jacks of this unit Control range 6 0 dB to 0 0 dB Initial setting 3 0 dB Select TV OPTICAL to adjust the level of audio and video signals input at the TV OPTICAL IN j
65. ecting other external components Connecting a 0 Connecting the power supply cable GETTING STARTED eere entente 22 Installing batteries in the remote control 22 Operation range of the remote control Using the remote control eee Turning on the power eeeeeeeree USING SET MENU Displaying the OSD sene The flow chart of SET CHANGING OSD LANGUAGE e AUTO SETUP IntelliBeam The flow chart of AUTO Installing the optimizer microphone Using AUTO SETUP IntelliBeam USING THE SYSTEM MEMORY Convenient usage of the system memory Saying settings deitatem rene eene te Loading settings eese 35 BASIC OPERATION PLAYBACK once ccscestoesscccessesscsescsiseteasseseccecsecseaseees 37 Selecting the input source eee 37 Playing back sources Adjusting the volume Enjoying 2 channel sources in surround sound sss 43 Enjoying TV in surround sound 44 Adjusting surround mode parameters 45 ENJOYING STEREO SOUND m Stereo playbacken PLAYING BACK SOUND CLEARLY MY De lil eee eint eoe e eco ee erre 47 Using au
66. emarks of Digital Theater Systems Inc 1 Manufactured under license from 1 Ltd Worldwide patents applied for TM The 4 logo and Digital Sound Projector are trademarks of 1 Ltd SRSC TruBass SRS and the 8 symbol are registered trademarks of SRS Labs Inc TruBass technology is incorporated under license from SRS Labs Inc 3 En z 2 O d 2 USING THIS MANUAL Notes This manual describes how to connect and operate this unit For details regarding the operation of external components refer to the supplied owner s manual for the component Some operations can be performed by using either the buttons on the main unit or on the remote control In such cases the operation is described using remote control operation X indicates a tip for your operation This manual is printed prior to production Design and specifications are subject to change in part as a result of improvements etc In case of differences between the manual and product the product has priority 1 Install this unit in your listening room See INSTALLATION on page 11 2 Connect this unit to your TV and other external components See CONNECTIONS on page 14 3 Prepare the remote control and turn on the power of this unit See GETTING STARTED on page 22 4 Run AUTO SETUP See AUTO SETUP IntelliBeam on page 27 5 Play back a source See PLAYBACK on page 37
67. emote control Operation range of the remote control You can control other components by setting the appropriate The remote control transmits a directional infrared beam Use the remote control within 6 m of this unit and point it toward the remote control sensor on this unit during operation Notes Do not spill water or other liquids on the remote control Do not drop the remote control Do not leave or store the remote control in the following types of conditions places of high humidity such as near a bath places of high temperatures such as near a heater or a stove places of extremely low temperatures dusty places Do not expose the remote control sensor on this unit to direct sunlight or lighting such as inverted fluorescent lamps If the batteries grow old the effective operation distance of the remote control decreases considerably If this happens replace the batteries with two new ones as soon as possible GETTING STARTED Using the remote control This section describes how to control this unit using the supplied remote control The functions of the remote control change depending on the position of the operation mode selector Set the operation mode selector to YSP to switch to the operation mode of this unit The buttons on the remote control numbered 1 to 4 are operational only when you select YSP Also functions of the buttons numbered 5 to 8 vary depending on
68. en the unit is in the standby mode only STANDBY ON on the front panel or on the remote control is operational and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on 23 En USING SET MENU Displaying the OSD This section simply describes how to display the OSD on screen display of this unit on your TV screen and set the parameters for your listening room Once this is complete you can enjoy real surround sound while watching TV in the comfort of your own home 1 Checkthat the video input jack on your TV is 3 Turnon the power of your TV connected to the VIDEO OUT jack of this unit The following screen appears on your TV to display the OSD of this unit 2 Press STANDBY ON on the front panel or on the remote control to turn on the power of this unit Push MENU to begin set ur Ly or OSD screen example STANDBY Front panel Remote control If the OSD does not appear use the remote control provided with your TV to switch the video input until the OSD appears 24 En The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure Run LANGUAGE SETUP See CHANGING OSD LANGUAGE on page 26 Run AUTO SETUP IntelliBeam See AUTO SETUP IntelliBeam on page 27 If an error occurs Look for a remedy See Error messages for AUTO SETUP on page 33 for a complete list of er
69. eration mode selector to TV AV and then press STB to select STB as the input source The control area of the remote control changes to the STB operation mode t gt mh STANDBY ON POWER POWER 00 INPUT1 INPUT2 MACRO 5 C3 65 C lt e z o m A INPUTMODE SLEEP Bies ST 3BEAM 3BEAM 1 2 STEREO SURROUND 4 s s MUSIC MOVIE SPORTS CH LEVEL MENU SAO O Bee O MUTE TVINPUT TV MUTE CODE SET ab Ger ca C3 ce AV POWER Turns on or off the power of your STB Numeric buttons Use to enter numeric digits CH Switches between the available STB channels 79 En 9 m E 5 5 m REMOTE CONTROL FEATURES Using the TV macro The TV macro feature makes it possible to perform a series of operations with the press of a single button For example when you want to play a DVD you would normally turn on the component select DVD as the input source and press the play button to start playback The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button Notes Be sure to set up a remote control code for your TV before setting macros The ways to set macros differ if your TV does not have the tuning capability f you press any control buttons on
70. eters frequency level and Q factor for each of the seven bands in its parametric equalizer to provide highly precise automatic adjustment of frequency characteristics LEVEL Checks and adjusts the sound output level of each channel The flow chart of AUTO SETUP This unit performs a series of checks to optimize the beam angle delay volume and quality You can choose to optimize all or part of the parameters Notes Checking the environment of your listening room 1 The beam angle checking procedure is skipped if SOUND OPTIMZ only is selected 2 The sound optimization procedure is skipped if BEAM 1 OPTIMZ only is selected 3 The subwoofer checking procedure is skipped if BEAM OPTIMZ only is selected Beam Optimizing the beam angle _ optimization Checking the subwoofer Sound Optimizing the beam delay optimization frequency and volume 27 En AUTO SETUP IntelliBeam Installing the optimizer microphone The supplied optimizer microphone collects and analyzes the sound that this unit produces in your actual listening environment Follow the procedure below to connect the optimizer microphone to this unit and make sure that the optimizer microphone is placed in a proper location and that there are no large obstacles between the optimizer microphone and the walls in your listening room Notes After you have completed the AUTO SETUP procedure be sure to
71. figure the parameters for Dolby Pro Logic II Gives front left and right channel sound a wraparound Music and DTS Neo 6 Music to fine tune the surround effect distributed throughout the entire surround sound effect sound field to give you an expansive feeling Choices ON OFF SBEAM ST 3BEAM Default setting OFF 2 STEREO SURROUND DIMENSION Cs Adjusts the difference in volume between front and MUSIC MOVIE SPORTS surround channels to the volume balance you desire Control range 3 toward the surround direction to 3 toward the front direction CH LEVEL MENU O Default setting STD n CT WIDTH 5 98 Distributes the center channel sound to the left and Cv gt right If set to 0 center channel sounds output only from the center channel Control range 0 to 7 1 Repeat steps 1 and 2 in Enjoying 2 channel Default setting 3 sources in surround sound on page 43 and select PL Il Music or Neo 6 Music When DTS Neo 6 Music is selected C IMAGE Adjusts the center image from three channels front 2 Press A 7 to select the parameter and center to varying degrees Control range 0 0 wider to 1 0 toward the center Default setting 0 3 m 0 E O 45 En ENJOYING STEREO SOUND Stereo playback Notes When you play back multi channel sources all signals except those for the front left and right channels are mixed down
72. firmly connected to this unit Is the optimizer microphone placed in a proper loacation Are there any large obstacles in between the optimizer microphone and the walls in your listening room The AUTO SETUP procedure starts in 10 seconds after pressing ENTER on step 7 To achieve the best results possible evacuate yourself for your listening room until the AUTO SETUP procedure is completed To cancel the AUTO SETUP procedure after it is started press RETURN The AUTO SETUP procedure takes about 3 minutes Press ENTER to start the AUTO SETUP procedure The following screen appears on the TV and the AUTO SETUP procedure starts in 10 seconds CH LEVEL MENU The setup screen automatically changes during the AUTO SETUP procedure If any error occurs the corresponding error message appears on the screen In this case see Error messages for AUTO SETUP on page 33 in the Owner s Manual and then follow the instructions To start the AUTO SETUP procedure once again press RETURN and then carry out the procedure from step 5 When the AUTO SETUP procedure is complete the following screen appears on the TV This is an example of the result screen The result may differ depending on the environment Press ENTER The result is confirmed and the following screen appears on the TV for 2 seconds and then the menu screen disappears from the TV The new settings are automatically saved in the system memory Disc
73. ge 30 degrees off axis from the front panel 83 En TWNOILIGGV z fe 2 fe z TROUBLESHOOTING B Remote control adjust function maximum range of 6 m and no more than 30 degrees off axis from the front panel See Problem Cause Remedy page The remote control does not work Wrong distance or angle The remote control will function within a 22 and or function properly maximum range of 6 m and no more than 30 degrees off axis from the front panel Direct sunlight or lighting from an Reposition this unit inverter type of fluorescent lamp etc is striking the remote control sensor of this unit The batteries are weak Replace all batteries 22 You cannot operate external The external component you want to Press INPUT on the front panel or the 37 components with this unit s operate is not selected as the input input selector buttons on the remote remote control source control to select the external component you want to operate The remote control code was not Set the remote control code correctly or TI correctly set try another code for the same manufacturer using the LIST OF REMOTE CONTROL CODES at the end of this manual Even if the remote control code is Use the remote control supplied with the correctly set there are some models that external component do not respond to the remote control The cursor buttons do not work The operation mode selec
74. htness of the display 67 OSD SET Adjusts the display position and the background color of the OSD 67 UNIT SET Changes the display unit of measurement 67 57 En gt iE 25 m zr MANUAL SETUP Using MANUAL SETUP Use the remote control to access and adjust each parameter Mou AOA 5BEAM ST 3BEAM 3BEAM STEREO BEAM SURROUND MUSIC MOVIE SPORTS You can adjust the SET MENU parameters while the unit is reproducing sound 1 Set the operation mode selector to YSP to switch to the operation mode of this unit H Press MENU on the remote control The SET MENU screen appears on your TV MENU HUT SETUP MANUAL SETUP gt LANGUAGE SETUP LEHTER 1 Enter The control buttons used for SET MENU displayed the bottom of the screen To return to the previous screen while using SET MENU press RETURN on the remote control To cancel the SET MENU screen press MENU once more You can also perform the following operations in the front panel display 58 En 3 Press 2 lt 7 to select MANUAL SETUP and then press ENTER The following screen appears on your TV Press A V to select a sub menu and then press ENTER 5 Press A V I b and ENTER to configure each parameter 6 Press MENU to exit The OSD disappears from your TV screen MENU Es MANUAL SE
75. ideo pin cable supplied White 5 Whi White 7 CET White Yellow e Yellow Red gt Red Optical cable supplied TE 15 En CONNECTIONS Connecting a DVD player recorder To connect a DVD player recorder connect the coaxial digital output jack on your DVD player to the coaxial digital input jack DVD COAXIAL on this unit If there is no coaxial digital output jack on your DVD player recorder use them with optical digital connection To prevent the optical cable from being unplugged affix the optical cable in the supplied cable clamp see page 14 Notes Check that your DVD player recorder is properly set to output Dolby Digital and DTS digital audio signals If not adjust the system settings of your DVD player recorder For details refer to the operation manual supplied with your DVD player recorder If your DVD player recorder does not have a coaxial digital output jack make an optical digital audio connection instead DVD VCR combo player recorder DVD player recorder Video signal to a TV j Video signal to a TV Analog audio Coaxial digital output output 3 4 tt Coaxial digital output U Rear panel of this unit VCR TV STB SUBWOOFER VIDEO TV STB AUX DVD OPTICAL COAXIAL AUDIO INPUT
76. if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night My beam iz microphone ZEN POWER POWER e C U STEREO BEAM SURROUND o B lt MUSIC MOVIE SPORTS Ef Gee o m mn lt m m O S O Note If the my beam is selected as the beam mode the surround modes see page 42 the CINEMA DSP programs see page 49 and the TruBass see page 54 become ineffective In addition no audio is output from the subwoofer connected to this unit w gt O Using auto adjust function Notes f an error occurs an error buzzer is played and MY BEAM ERROR is displayed on the front panel display An error may occur if the listening room is noisy Make sure je D m gt 9 z The my beam microphone on the remote control collects the test tones from this unit and then the beam angle is automatically adjusted that the listening room is as quiet as possible during the test tones are being output 1 Setthe operation mode selector to YSP to Do not shake or move the remote control during the test tones switch to the operation mode of this unit are being output Do not cover the my beam microphone on the remote control TV AV
77. is unit is performing the AUTO SETUP procedure To achieve the best results possible evacuate yourself from your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound ni SETUP beams gt LANGUAGE SETUP Be advised that it is normal for loud test tones to be output LAl Dr Ue Down CENTER Enter during the AUTO SETUP procedure er The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms described in Before MENU MEMORY installing this unit on page 11 In such cases run MANUAL xe SETUP see page 57 to manually adjust the corresponding The control buttons used for SET MENU are displayed on parameters the bottom of the screen If an error occurs an error buzzer is played the AUTO SETUP To return to the previous screen while using SET MENU procedure stops and then an error message appears on the press RETURN on the remote control screen See Error messages for AUTO SETUP on page 33 for To cancel the SET MENU screen press MENU again appropriate remedies You can start the BEAM SOUND OPTIMZ procedure simply by pressing and holding AUTO SETUP on The AUTO SETUP procedure takes about 3 minutes maximum remote control for more than 2 seconds Step 4 and 5 are A chime is played when the AUTO SETUP procedure is run skipped and then the screen shown in step 5 is displayed successfully
78. l this unit where there are no objects such as furniture obstructing the path of sound beams Otherwise the desired surround sound effects may not be achieved You may install this unit in parallel with the wall or in the corner QUICK REFERENCE GUIDE Install this unit in the corner at a 40 to 50 angle from the adjacent walls An object such as furniture 40 to 50 Install this unit in the exact center of the wall when it is measured from the left and right corners An object such as furniture You can below to Install this unit either above or under your TV Please read the following for reference For further information on installation see pages 11 to 13 in the Owner s Manual Make sure you use the supplied fasteners to prevent an accidental fall of this unit see page 13 in the Owner s Manual When installing this unit under your TV place it in a TV cabinet as shown below Make sure that the cabinet is large enough to allow adequate ventilation space around this unit To enjoy better surround effects place this unit on the upper shelf to keep it away from the floor When installing this unit above your TV place it on the top panel of a commercially available rack as shown below Make sure that the top panel of the rack is wide and stable enough to support the weight of this unit Connecting external components to this unit Connect external component such as a TV or DVD pl
79. lding MACRO down press 9 m 5 25 m 2E CODE SET 5 Press ENTER on the remote control to confirm the setting 3 Press ENTER on the remote control to cancel the macros 81 En TROUBLESHOOTING Refer to the chart below when this unit does not function properly If the problem you are experiencing is not listed below or if the instruction below does not help set this unit to the standby mode disconnect the power supply cable and contact the nearest authorized YAMAHA dealer or service center B General See Problem Cause Remedy page This unit fails to turn on when The power supply cable is not firmly Connect the power supply cable firmly to 21 STANDBY ON is pressed or enters connected to the AC wall outlet the AC wall outlet the standby mode soon after the power has been turned on This unit has been exposed to a strong Set this unit to the standby mode external electric shock such as lightning disconnect the power supply cable plug and strong static electricity it back in after 30 seconds then use it normally This unit suddenly enters the The internal temperature becomes too Wait about 1 hour for this unit to cool standby mode high and the overheat protection circuitry down and then turn it back on has been activated The sleep timer has turned the unit off Turn on the power and play the source again No sound Incorrect in
80. lity at lower volumes or at night In addition you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change i e due to commercials etc INPUT1 INPUT2 MACRO v VOL MODE E INPUTMODE SLEEP C o occ 5BEAM ST 3BEAM 3BEAM 2 STEREO BEAM SURROUND E MUSIC MOVIE SPORTS OFF ce 01 0 CH LEVEL MENU Oca ie TV AV YeP GN Cs 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit 52 En Press VOL MODE on the remote control repeatedly to select NIGHT CINEMA NIGHT MUSIC TV EQUAL VOL or OFF VOL MODE The NIGHT indicator lights up in the front panel display when NIGHT CINEMA or NIGHT MUSIC is selected N 7 NIGHT 7 N Lights up Select NIGHT CINEMA when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes Select NIGHT MUSIC when listening to music sources to preserve ease of listening for all sounds Select TV EQUAL VOL when watching TV programs Select OFF to turn off the volume mode USING THE VOLUME MODE Night listening mode TV volume equal mode 3 Press P on the remote control to adjust the effect level of compression while NIGHT CINEMA NIGHT MUSIC or TV EQUAL VOL is displayed Select Effect Lvl MIN for minimum
81. ls NR o s 2 RM 2 S Example 3 Install this unit as close to the exact front of your normal listening position ZN 12 En B Using a metal wall bracket You can use the optional metal wall bracket to mount this unit on the wall in your listening room Metal wall bracket 9 This unit TV Mou AOA Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket B Using a stand You can mount your TV on the stand placed on a commercially available rack to install this unit under your TV Stand P This unit via AOA Refer to the instructions supplied with the stand for details on how to install the stand or how to mount this unit and the TV on the stand INSTALLATION B Using a rack You can install this unit either above or under your TV in a commercially available rack When this unit is installed above your TV x NI When this unit is installed under your TV Note Make sure that the rack is large enough to allow adequate ventilation space around this unit see page 11 and that it is strong enough to support the weight of both this unit and your TV Affixing this unit Peel off the film from each of the four supplied fasteners and then secure them to the bottom fo
82. ls The unit incorporates a DTS ES decoder that enables 6 1 channel reproduction by adding the surround back channel to existing 5 1 channel format B DTS Neo 6 Neo 6 decodes the conventional 2 channel sources for 6 channel playback by the specific decoder It enables playback with the full range channels with higher separation just like digital discrete signal playback Two modes are available Music mode for playing music sources and Cinema mode for movies B PCM Linear PCM Linear PCM is a signal format under which an analog audio signal is digitized recorded and transmitted without using any compression This is used as a method of recording CDs and DVD audio The PCM system uses a technique for sampling the size of the analog signal per very small unit of time Standing for pulse code modulation the analog signal is encoded as pulses and then modulated for recording Audio information B LFE 0 1 channel This channel is for the reproduction of low bass signals The frequency range for this channel is 20 Hz to 120 Hz This channel is counted as 0 1 because it only enforces a low frequency range compared to the full range reproduced by the other 5 6 channels in Dolby Digital or DTS 5 1 6 1 channel systems 85 En TWNOILIGGV z je 2 e z AUTO SETUP IntelliBeam eee 27 Beatumiode 40 46 47 Cable clap 14 Cardboard microphone
83. mote control to confirm the macro setting REMOTE CONTROL FEATURES B Setting macros for the TV without the Operating macros tuning capability 1 Setthe operation mode selector to YSP to 1 Press and hold CODE SET on the remote switch to the operation mode of this unit control and then press one of the input selector buttons to select the input source Ee you want to set macros for E Proceed to step 2 while holding down CODE SET ONU S ven _ ovo _ ux 2 Press and hold one of the input selector While holding buttons for approximately 2 seconds to down press CODE SET select the input source you want to operate 2 Press MACRO on the remote control while macros for holding down CODE SET E CONN The TV input changes at the same time the input mode changes TV MUTE While holding MACRO down press CODE SET Canceling the macros 3 Press INPUT1 on the remote control _ S 1 Press and hold CODE SET on the remote INPUT1 control and then press one of the input selector buttons to select the input source you want to cancel the macros for Proceed to step 2 while holding down CODE SET 4 Press CH or TV INPUT on the remote control repeatedly so that the screen TVMUTE While holding ans CHAIM changes to the display of the input source down press selected in step 1 CODE SET TV INPUT 2 Press MACRO on the remote control while or holding down CODE SET TV MUTE While ho
84. n a suitable position and then affix cables in the pue cable clamp Attach to this unit a 14 En CONNECTIONS Connecting a TV You can connect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU Mz AOA To prevent the optical cable from being unplugged affix the optical cable in the supplied cable clamp see page 14 Note If you connect this unit to the analog audio and optical digital audio output jacks at the same time as shown in the left illustration below the digital audio signals output at the optical digital output jack take priority over the analog audio signals output at the analog audio output jacks E Digital and analog audio connections Video connections TV TY D Te H 4S ELT Analogaudio Optical digital 1 output P output Video input Remove the caps if Check the direction Rear panel of this unit Rear panel of this unit attached ea VCR SUBWOOFER VIDEO TV STB AUX DVD OPTICAL COAXIAL DIGITAL INPUT 9 6 mm VCR TV STB SUBWOOFER VIDEO TV ISTB AUX DVD OPTICAL COAXIAL DIGITAL INPUT AUDIO INPUT OUT AUDIO INPUT OUT Cables used for connections Cables used for connections Audio pin cable OSD v
85. n you have completed your adjustment Notes All the channel levels cannot be adjusted when the stereo playback is selected as the beam mode see page 46 FRONT L R cannot be adjusted when the stereo plus 3 is selected as the beam mode see page 41 Only CENTER can be adjusted when the my beam is selected as the beam mode see page 47 FRONT L R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode see pages 41 and 46 Mo AOA If the level of a particular channel cannot be adjusted dB appears in the front panel display 70 En SELECTING THE INPUT MODE You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source Mu AOA We recommend setting the input mode to AUTO in most cases A STANDBY ON POWER POWER ss w INPUT1 INFUT2 MACRO c3 C3 O CJ JOL MODE SETUP INPUTMODE SLEEP OOOO 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit H 2 Press one of the input selector buttons on the remote control to select the desired input source 3 Press INPUTMODE on the remote control repeatedly to toggle between input modes INPUTMODE When AUX is selected as the input source When TV or STB is selected as the input s
86. nd then press AUX on the remote control to play back a component connected to the AUX jack on the rear panel of this unit E J gt d Playing back sources Once an input source is selected see page 37 you can play back the selected input source Note This section uses a DVD player as an example of the playback source E a For details on the TV and the DVD player you are using refer to the owner s manual supplied with the TV and the DVD player 1 Turn on the power of your DVD player using the remote control supplied with the DVD player 2 Switch to the video input on your TV using the remote control supplied with the TV so that the DVD menu screen is displayed 38 En 3 if necessary turn down the volume of your TV until you cannot hear any sound 4 Setthe operation mode selector to YSP to switch to the operation mode of this unit 5 Press DVD on the remote control to select DVD as the input source DVD 6 Play back the DVD on your DVD player using the supplied remote control Audio signals from your DVD player are output from this unit Mz ROA You can check the digital signal being input at the DVD player with the digital connection optical coaxial Press ST 3BEAM on the remote control while playing back a DVD recorded in 5 1 channel The DIGITAL or elis indicator lights up when this unit detects the 5 1 channel signal input at the optical coaxial j
87. o 6 Dolby Digital This is the standard audio signal format used on DVDs and other purely digital media This surround technology deliver high quality digital audio for up to 5 1 discrete channels to produce a directional and more realistic effect DTS Digital Theater Systems This is an audio signal format used on DVDs and other purely digital media This surround technology deliver high quality digital audio for up to 5 1 discrete channels to produce a directional and more realistic effect Dolby Pro Logic This sophisticated matrix decoding technology up converts any 2 channel source audio to a 5 1 channel full bandwidth playback resulting in a surround sound experience Dolby Pro Logic II This is fundamentally a redesigned version of Dolby Pro Logic that employs 2 stereo surround channels a subwoofer and a greatly enhanced steering logic As a result this improved technology provides an exceptionally stable sound field that simulates 5 1 to a much greater degree than the original Dolby Pro Logic In addition Dolby Pro Logic II features Movie Music and Game modes specifically designed for movies music and games respectively DTS Neo 6 This technology decodes the conventional 2 channel sources for 6 channel playback enabling playback with the full range channels with higher separation Music mode and Cinema mode are available to play back music and movie sources respectively dts DTS and Neo 6 are trad
88. ol MUTE or voL VOLUME Lights up The volume level of all input sources including multi channel Naf as well as stereo sources changes at the same time d Notes One of the volume level increases or decreases each time you press VOLUME i You can continuously increase or decrease the volume level if you press and hold VOLUME Note The sound output of all input sources including multi channel as well as stereo sources is muted at the same time ala z2 You can select whether the sound output is to be muted completely or by 20 dB when you press MUTE see page 64 39 En ENJOYING SURROUND SOUND You can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote control Select 3 beam 5 beam and stereo plus 3 beam for multi channel playback Note When ANGLE TO WALL OR CORNER is set in MANUAL SETUP see page 59 5 beam and 3 beam cannot be selected VOL MODE AU INPUTMODE SLEEP C C O O 5BEAM ST 3BEAM 3BEAM J 2 3s STEREO BEAM SURROUND a Ea 292 MUSIC MOVIE SPORTS Co ce Co C CH LEVEL MENU OK A2 ET OCO Gy 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit TV AV aH 2 Press one of the beam mode buttons BBEAM ST 3BEAM or to select the desired beam mode for 5 1 channel
89. olling other components Using the TV macro see ADDITIONAL INFORMATION TROUBLESHOOTING cccsscssssssssesessrsessreeees 82 GLOSSARY cccssssssrsessrsessrssssssesssseserssseesesesseeeees Audio formats Muting the sound sse ENJOYING SURROUND SOUN 1 En dNLas NOILWuYVdSdd NOILONGOULNI De Hl 4 6 D Te Js ETF 0 Zp og is 2 5 5 It is generally accepted that in order to fully enjoy the benefits of surround sound at home you must endure the agony of wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater YAMAHA YSP 900 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand in hand with the enjoyment of multi channel surround sound This slimline unit does away with the need for complicated wiring and installation worries leaving you with a unit that is not only easy to set up but which is also capable of reproducing the kind of powerful surround sound you have been waiting for from its built in 2 woofers and 21 full range small speakers You can fine tune the parameters of this unit to adjust the delay time for separate sound beams resulting in highly directional sound that comes in on the
90. onnect the optimizer microphone and keep it in a safe place CH LEVEL MENU AUTO SETUP COMPLETE Enjoying surround sound Enjoy TV or DVD audio in surround sound For instructions on your TV or DVD player refer to the owner s manual supplied with each component Before carrying out the procedure below set the volume of this unit to 30 If necessary adjust the volume level in step 4 Enjoying TV in surround sound Enjoying DVDs in surround sound GD Select the TV channel using Select the DVD video input on your the remote control supplied TV Press DVD on the remote control of this unit and then start playback on the DVD player This unit switches to the DVD playback mode with your TV e Set the operation mode selector to YSP e Press TV on the remote control of this unit This unit switches to the TV playback mode 2 MACRO ver UTO E 25 VOLMOX JETUP INPUTMODE SLEEP VOL MODE SETUP INPUTMODE SLEEP E If you hear sound output from your TV speakers turn down the volume level until you cannot hear any sound Use the remote control supplied with your TV amp Press VOLUME the remote control to adjust the volume level of this unit Q Press one of the beam mode buttons on the remote control to select the desired beam mode Select one of the three beam modes that best matches the current input source of this unit For further info
91. ons in the front panel display 3 Press A 7 to select MEMORY and then press ENTER The following screen appears on your TV Ue CENTER Ent The SET MENU screen disappears from your TV MENU Cale DF Ue Dourn LEHTERT Enter 35 En USING THE SYSTEM MEMORY Press A v to select LOAD and then press 6 Press ENTER again ENTER The new parameters are saved as MEMORY 1 The following screen appears on your TV MEMORY Once the parameters saved the display returns to the SET MENU screen MEMORY1 Loading MEMORY MEMORY amp Dr iSelect EHE AUTO SETUP CENTER Enter HEHUAL SETUP LANGUAGE SETUP CENTER Enter 5 Press 2 7 to select MEMORY1 MEMORY 2 or MEMORY and then press 7 Press MENU to exit ENTER The following screen appears on your TV The SET MENU screen disappears from your TV MENU MEMORVI Load Mou Push CENTER to Load 36 En PLAYBACK E E Front panel operations Selecting the mp ut source Press INPUT on the front panel repeatedly to You can play back sound from the components connected toggle between TV DVD VCR and AUX to this unit simply by pressing INPUT on the front panel The name of the corresponding input source and the type repeatedly or pressing one of the input selector buttons of the current input mode are shown in the front
92. ontents of the memory Proceed to step 2 while holding down CODE SET TV MUTE e wel ove 7 d While holding down press CODE SET TT En REMOTE CONTROL FEATURES Controlling other components B Operating your TV Set the operation mode selector to TV AV and then press TV to select TV as the input source The control area of the remote control changes to the TV operation mode who Cu STANDBY ON POWER POWER O ver STB INPUT wPUr2 wO VOL MODE SETUP INPUTMODE SLEEP C C CJ CJ ST 3BEAM MY BEAM SURROUND MOVIE SPORTS TV POWER Turns on or off the power of your TV TV INPUT1 2 Selects the input source of the TV 3 Numeric buttons Selects a TV channel for playback CH Switches between the available TV channels TV VOL Adjusts the audio output level of the TV 6 TV INPUT Switches the input source for the TV TV MUTE Temporarily mutes audio output from the TV 78 En B Operating your DVD player Set the operation mode selector to TV AV and then press DVD to select DVD as the input source The control area of the remote control changes to the DVD operation mode gt DVD YsP t STANDBY ON POWER POWER RM INPUTi INPUT2 MACRO ee 3e
93. operating errors before concluding that this unit is faulty Before moving this unit press STANDBY ON to set this unit in standby mode and disconnect the AC power plug from the wall outlet Condensation will form when the surrounding temperature changes suddenly Disconnect the power cable from the outlet then leave the unit alone When using the unit for a long time the unit may become warm Turn the power off then leave the unit alone for cooling Install this unit near the AC outlet and where the AC power plug can be reached easily WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE This unit is not disconnected from the AC power source as long as it is connected to the AC wall outlet even if this unit itself is turned off This state is called the standby mode In this state this unit is designed to consume a very small quantity of power FOR U K CUSTOMERS If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate 3 pin plug fitted For details refer to the instructions described below Note that the plug severed from the mains lead must be destroyed as a plug with bared flexible cord is hazardous if engaged in a live socket outlet IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE Blue NEUTRAL Brown LIVE As the colours of the wires in
94. ou can also perform the following operations in the front panel display 3 Press A V to select LANGUAGE SETUP and then press ENTER The following screen appears on your TV 26 En AUTO SETUP IntelliBeam This unit creates a sound field by reflecting sound beams on the walls of your listening room and broadening the cohesion of all the channels Just as you would arrange the speaker position of other audio systems you need to set the beam angle to enjoy the best possible sound from this unit This unit employs the beam optimization and sound optimization features with the aid of the supplied optimizer microphone allowing you to avoid troublesome listening based setup and achieving highly accurate sound adjustments that best match your listening environment We call these 2 features IntelliBeam generically The beam optimization creates the best possible surround sound field without manually setting the parameters for your listening room The sound optimization feature performs the following checks and automatically makes appropriate sound adjustments DISTANCE Checks the distance of each beam from this unit and adjusts the delay of each channel so that each sound beam reaches the listening position at the same time EQUALIZING Adjusts frequency and levels of each channel s parametric equalizer to reduce coloration across the channels and create a cohesive sound field The sound optimization feature incorporates three param
95. ould be set above 1 8m 6ft front of this unit and within 1 m from the center height of this unit ERROR E 6 The optimizer microphone cannot collect Make sure that the optimizer microphone 28 is firmly connected to this unit and placed in a proper location If the problem persists contact the nearest YAMAHA service center for assistance ERROR E 7 Unexpected error happened Please re try An internal system error occurred Repeat the AUTO SETUP procedure 33 En USING THE SYSTEM MEMORY Convenient usage of the system 3 Press A V to select MEMORY and then memory press ENTER The following screen appears on your TV You can save the current settings adjusted in SET MENU in the system memory of this unit It is handy to save certain settings according to the varying conditions of your listening environment For example if there are curtains in the path of beams the effectiveness of the beams will vary depending on whether the curtains are open or closed When the curtains are When the curtains are open closed gt gj w Ur Doun Enter 5 3 4 Press A 7 to select SAVE and then press Saving settings ENTER The following screen appears on your TV 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit 2 Press MENU on the remote control The SET MENU screen appears on your TV MENU
96. ource When DVD is selected as the input source Notes The input mode of VCR is fixed to ANALOG However if the TV OPTICAL IN jack of this unit is assigned to VCR AUTO DTS and ANALOG become available as the input mode of VCR see page 65 ANALOG is not available as the input mode of DVD and AUX AUTO Automatically selects audio input signals in the following priority order 1 Dolby Digital or DTS 2 PCM 3 Analog Use this input mode in most cases DTS Selects only digital signals encoded in DTS Compared to AUTO this input mode provides greater stability while playing back CDs or LDs encoded in DTS ANALOG Selects only analog signals Even when both digital and analog signals are input simultaneously only analog signals are selected ale AOA You can adjust the default input mode to be selected when the power of this unit is turned on see page 65 71 En gt m E 25 m PRU ADJUSTING SYSTEM PARAMETERS This unit has additional menus that are displayed in the front panel display These menus offer additional operations to adjust and customize the way this unit operates Using the system parameters 3 Release INPUT on the front panel Follow the procedure below to enter the system parameters O INPUT n Setting the MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed
97. panel TV STB VCR DVD or AUX on the remote control display The name of the selected input source and the type of the corresponding input mode appear in the front panel Remote control operations display Set the operation mode selector to YSP to switch to the operation mode of this unit and then press TV on the remote control to play back a TV program YSP wa gt C E t 0 n m STANDBVION Li Name of the selected Type of the selected input source input mode ss ves 55 ux TV INPUTi INPUT2 MACRO co C3 C3 CJ Set the operation mode selector to YSP to switch VOLMODE SETUP INPUTMODE SLEEP to the operation mode of this unit and then press v C 63 6j s ER LJ STB on the remote control to play back a satellite 2 1 3 broadcast a O a STEREO BEAM SURROUND MUSIC MOVIE SPORTS TV AV STB at gt YQ Set the operation mode selector to YSP to switch to the operation mode of this unit and then press DVD on the remote control to play back a DVD 8 J gt al 37 En PLAYBACK Set the operation mode selector to YSP to switch to the operation mode of this unit and then press VCR on the remote control to play back a video tape E zd Set the operation mode selector to YSP to switch to the operation mode of this unit a
98. play back 5BEAM ST 3BEAM 3BEAM 40 n 5 beam Outputs sound beams from the front left and right center and surround left and right channels This mode is ideal for enjoying surround sound effects to the fullest when watching DVDs recorded in a multi channel format or playing back 2 channel sources in a multi channel format Press 5BEAM on the remote control to select the 5 beam C 5BEAM Notes To achieve the best surround sound effect make sure that there are no obstacles placed in the path of sound beams in that the objects may prevent the beams from rebounding directly off the walls in your listening room The front left and right sound beams are output towards the walls in your listening room If you press SBEAM SP Pos Corner appears in the front panel display when INSTALLED POSITION is set to ANGLE TO WALL OR CORNER ENJOYING SURROUND SOUND Stereo plus 3 beam Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels This mode is ideal for watching live recordings on a DVD Vocals and instrumental sounds can be heard close to the center of the listening position while sound reflections from the venue itself can be heard on your right and left giving you the feeling that you are sitting right in front of the stage Press ST 3BEAM on the remote control to select the stereo plus 3 beam ST 3BEAM n AN
99. put or output cable Connect the cables properly If the 14 connections problem persists the cables may be defective No appropriate input source has been Select an appropriate input source with 37 selected INPUT or the input selector buttons The volume is turned down Turn up the volume 39 The sound is muted Press MUTE or VOLUME on the 39 remote control to resume audio output and then adjust the volume level Signals this unit cannot reproduce such Play a source whose signals can be as PCM signals with more than 96 kHz reproduced by this unit of sampling frequency are being 7 received from source component Change the system settings of the source component The sound suddenly goes off The sleep timer has turned the unit off Turn on the power and play the source again The sound is muted Press MUTE or VOLUME on the 39 remote control to resume audio output and then adjust the volume level No sound from the effect You are playing back the source or Press one of the beam mode buttons on 40 channels program in the stereo mode or my beam the remote control to select a multi mode channel playback mode and then try to play back the source or program once more No sound from the center channel The output level of the center channelis Raise the level of the center channel 68 set to minimum No sound from the surround The output level of the surround Raise the output level of the surround 68 channels channels is
100. r a certain amount of time while this unit is still playing back a source Each time you press SLEEP on the remote control Setting the sleep timer the front panel display changes as shown below SLEEP voL 2019 INPUTHODE SLEEP C C 5BEAM ST 3BEAM 3BEAM a STEREO SURROUND i D MUSIC MOVIE SPORTS TV AV YsP ii RETURN 5 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit ES 3 Wait for a few seconds without operating this E unit to confirm the setting for the sleep timer 9 The SLEEP indicator lights up in the front panel m go display indicating that the sleep timer is activated 2 2 Press SLEEP on the remote control 3 repeatedly to set the amount of time for the CE sleep timer SLEEP Choices 120min 90min 60min 30min OFF N The SLEFP indicator in the front panel display Lights up flashes while switching the amount of time for the sleep timer SLEEP CMO e gt SLEEP Flashes 55 En USING THE SLEEP TIMER Canceling the sleep timer 1 Setthe operation mode selector to YSP to switch to the operation mode of this unit t 2 Press SLEEP on the remote control repeatedly so that SLEEP OFF appears in the front panel display SLEEP 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer The S
101. ravel after being output and The focal points except the center channel should be set reflected off the wall until they arrive at the listening near the reflection points on the walls The shorter the position and adjust the delay applied to the respective distance more the expansion channel The lines in the illustration below indicate the distance E focal length _ focal point L e sweet spot Ct Choices 0 3 m to 24 0 m Front L adjusts the distance the front left channel Front left channel Center channel sound beams travel Front R adjusts the distance the front right channel sound beams travel Center adjusts the distance the center channel sound beams travel Surround L adjusts the distance the surround left channel sound beams travel Surround R adjusts the distance the surround right Choices 1 0 m to 13 0 m channel sound beams travel Adjust towards minus to move the focus outward and adjust towards plus to move the focus towards the normal position Front L adjusts the focal length for the front left sound beams Front R adjusts the focal length for the front right _ 1 1 5 1 sound beams Center adjusts the focal length for the center sound beams Initial setting 0 5 m W Surround L adjusts the focal length for the surround sq We recommend that you use the setting optimized by the AUTO left sound beams E SE
102. rmation on the beam modes see page 40 in the Owner s Manual 5BEAM ST 3BEAM 3BEAM STEREO MY BEAM SURROUND MUSIC MOVIE SPORTS To fine tune the listening environment parameters manually or make advanced settings for speaker positions sound beams etc see MANUAL SETUP on page 57 in the Owner s Manual
103. ror messages and possible remedies Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP See PLAYBACK on page 37 If you want to make additional settings and adjustments Run MANUAL SETUP See MANUAL SETUP on page 57 f you cannot clearly hear a sound beam from specific channel adjust settings for SETTING PARAMETERS see page 59 or for BEAM ADJUSTMENT see page 60 in BEAM MENU If there are acoustically absorbent objects such as curtains in the path of the sound beams adjust settings for TREBLE GAIN in BEAM MENU see page 62 25 En CHANGING OSD LANGUAGE This feature allows you to select the language of your choice that appears in the SET MENU of this unit 1 sSetthe operation mode selector to YSP to Press A v to select the language and switch to the operation mode of this unit then press ENTER TVAV YsP 1 2 Press MENU on the remote control The SET MENU screen appears on your TV Choices ENGLISH English DEUTSCH German TEN gt MEMORY Fran ais French ESPA OL Spanish SETI AUTO SE gt MANUAL SETUP LANBUAGE SETUP Ur Daun ERTER Enter The control buttons used for SET MENU displayed the bottom of the screen To return to the previous screen while using SET MENU press RETURN on the remote control To cancel the SET MENU screen press MENU once more Y
104. s 1 to 3 in Using the system parameters on page 72 Set the operation mode selector to YSP to switch to the operation mode of this unit Press A Y the remote control so that DEMO MODE is shown in the front panel display ADJUSTING SYSTEM PARAMETERS 4 Press lt gt to switch between DEMO ON Setting the FACTORY PRESET and DEMO OFF You can reset all of the parameters of this unit to the factory presets This procedure completely resets ALL the parameters in SET MENU Note After performing the following procedure you must run the AUTO SETUP again to match your surround sound environment 1 Repeat steps 1 to 3 in Using the system parameters on page 72 2 Set the operation mode selector to YSP to switch to the operation mode of this unit ah 3 Press 7 the remote control so that FACTORY PRESET is shown in the front Select DEMO ON to activate the demo mode panel display Select DEMO OFF to deactivate the demo mode 5 Press STANDBY ON on the front panel to set this unit to the standby mode C The new setting will be activated when you turn on the power of this unit next time V Press ENTER to test the sound beam The sound beam being output shuttles between left and right Press ENTER again to stop shuttling 4 Press ENTER gt m aS AS m ERU 75 En ADJUSTING SYSTEM PARAMETERS 5
105. s channel settings that best match your listening environment using the supplied optimizer microphone Follow the procedure connect the optimizer microphone to this unit and place it in a proper location Connect the optimizer microphone to the OPTIMIZER MIC jack on the front panel Assemble the cardboard microphone stand and place the optimizer microphone on the top of the stand OPTIMIZER MIC i Optimizer microphone supplied i Set the optimizer microphone at your normal listening position Use the supplied cardboard microphone stand or a tripod to place the P E Printed in Malaysia lt WH90310 optimizer microphone at the same height as your ears would be when you are seated Place the optimizer microphone on the extended center line of this unit and 1 8 m 6 0 ft or more away from it Also make sure place the optimizer microphone within 1 m 3 3 ft upper or lower from the center height of this unit Optimizer microphone Within 1 m 3 3 ft upper or lower from the center Optimizer microphone Cardboard microphone stand If you have set the optimizer microphone follow the steps on the backside to start the AUTO SETUP procedure Center line Continued on the back Sofa 2006 YAMAHA CORPORATION rights reserved Continued from the front best match your listening environment Carry out the AUTO SETUP
106. s not connected to this because a source with strong bass unit elements was played back Select SWFR for BASS OUT 63 Connect a subwoofer and adjust settings 63 for SUBWOOFER SET Low frequency sounds are CROSS OVER in SUBWOOFER SET is Set CROSS OVER correctly 63 distorted set incorrectly On screen display does not The OSD video pin cable is not Connect the cable properly 15 appear connected properly This unit does not operate The internal microcomputer has been Disconnect the AC power supply cable properly frozen by an external electric shock from the outlet and then plug it in again such as lightning or excessive static after about 30 seconds electricity or by a power supply with low voltage There is noise interference from This unit is too close to the digital or Move this unit further away from such digital or high frequency high frequency equipment equipment equipment This unit does not output effect The original source includes surround Disable surround effect settings on this m sounds properly effects unit My beam auto adjust function The listening room is too noisy Keep the listening room as quiet as does not work possible Try manual adjustment 48 The sound reflectivity of the listening Set REFLECTING to HI ECHO 64 room is too much The remote control may be operated The remote control will function within a 22 outside of the remote control operation maximum range of 6 m and no more than ran
107. signals are being input or when DTS Neo 6 dits is selected When Dolby Digital signals are being input DIGITAL When Dolby Pro Logic is selected OO PL When Dolby Pro Logic II is selected DUPLI You can select an input mode AUTO DTS ANALOG by pressing INPUTMODE on the remote control repeatedly see page 71 Discs encoded in DTS ES or Dolby Digital 5 1 EX will be played back in DTS or Dolby Digital 42 En sources Surround mode Recommended source Dolby Pro Logic All sources Movie Movies Dolby Pro Logic Il Music Music Game Games Cinema Movies DTS 6 Music Music Notes Surround modes are available when the beam mode is set to a setting other than the stereo playback or the my beam as the beam mode When you select an input source see page 37 the surround mode used for the previously selected input source is selected If the power of this unit is turned off and on again the surround mode used for the previously selected input source before the power was turned off is selected The surround modes are available only when the CINEMA DSP programs are turned off see page 51 or when the movie program is selected as the CINEMA DSP program see page 50 Only Dolby Pro Logic Dolby Pro Logic II Movie and DTS Neo 6 Cinema are available when the movie program is selected as the CINEMA DSP program see page 50 If the surround modes are not available
108. t you should select this optimization feature in the following cases f you make settings for the first time If the unit has been relocated If your listening room has been restructured If the objects in your listening room furniture etc have been rearranged This menu takes about 3 minutes BEAM OPTIMZ only Beam optimization only Use to optimize the beam angle so that the parameter best matches your listening environment This menu takes about 1 minute SOUND OPTIMZ only Sound optimization only Use to optimize the beam delay volume and quality so that the parameters best match your listening environment Itis recommended that you should select this optimization feature in the following cases f you have opened or closed the curtains in your listening room before using this unit Ifyou have manually set the beam angle This menu takes about 2 minutes Note You must optimize the beam angle in the BEAM OPTIMZ only procedure before starting the SOUND OPTIMZ only procedure AUTO SETUP IntelliBeam Check the following points once again before starting the AUTO SETUP procedure Is the optimizer microphone firmly connected to this unit Is the optimizer microphone placed in a proper location Are there any large obstacles in between the optimizer microphone and the walls in your listening room Press ENTER to start the AUTO SETUP procedure The following screen app
109. the position of the operation mode selector The corresponding functions of the buttons see page 9 Mou You can control other components by setting the appropriate remote control codes see page 77 Once the remote control code for each input source DVD VCR STB TV or AUX is set see Controlling other components on page 78 for further information on the specific functions of the available remote control buttons for each input source Operational buttons only when YSP is selected TV INPUTi INPUT2 MACRO J D VOL MODE INPUTMODE SLEEP 5BEAM ST 3BEAM 3BEAM e FT oe OY VOLUME CH TV VOL Function varying buttons INPUT1 INPUT2 MACRO C AUTO VOL MODE SETUP INPUTMODE SLEEP DIDE ST 3BEAM 3BEAM MY BEAM SURROUND L MUSIC MOVIE SPORTS EB KR oO Turning on the power T VOLUME STANDBY ON STANDBY ON POWER POWER INPUT1 INPUTZ MACRO 1 Press STANDBY ON on the front panel or on the remote control to turn on the power of this unit The volume level appears in the front panel display and then the input source and beam mode currently selected are displayed Ly or STANDBY Front panel a Remote control 2 Press STANDBY ON on the front panel or on the remote control again to set this unit to the standby mode Note Wh
110. to adjust function 47 Using manual adjust function 48 USING SOUND FIELD PROGRAMS What is a sound field 49 Turning on CINEMA DSP programs 50 Turning off CINEMA DSP programs Adjusting CINEMA DSP effect levels wo USING THE VOLUME MODE Night listening mode TV volume equal MOAE cscccscscssesscssessssesssssessssessese 52 USING BASS SOUND ENHANCER RR DP m 54 USING THE SLEEP TIMER 55 Setting the sleep timer Canceling the sleep timer 56 ADVANCED OPERATION MANUAL SETUP sscsissscvesstsesssessessivssessssses soreses 57 Using MANUAL SETUP sse 58 BEAM MBENU tee riri breton ednei SOUND MENU INPUT MENU niiina DISPLAY ADJUSTING THE AUDIO BALANCE Using the test tone Using the audio output being played back SELECTING THE INPUT MODE ADJUSTING SYSTEM PARAMETERS Using the system parameters Setting the MEMORY PROTECT Setting the MAX 73 Setting the TURN ON 74 Setting the DEMO MODE gt Setting the FACTORY 75 REMOTE CONTROL FEATURES 77 Setting remote control codes Contr
111. tor was Set the operation mode selector to YSP during SET MENU operation unwantedly set to TV AV You cannot use the my beam auto Wrong distance or angle The remote control will function within a 22 84 En GLOSSARY Audio formats B Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi channel audio With 3 front channels left center and right and 2 surround stereo channels Dolby Digital provides 5 full range audio channels With an additional channel especially for bass effects called LFE low frequency effect the system has a total of 5 1 channels LFE is counted as 0 1 channel By using 2 channel stereo for the surround channels more accurate moving sound effects and surround sound environment are possible than with Dolby Surround The wide dynamic range from maximum to minimum volume reproduced by the 5 full range channels and the precise sound orientation generated using digital sound processing provide listeners with previously unheard of excitement and realism With this unit any sound environment from monaural up to a 5 1 channel configuration can be freely selected for your enjoyment B Dolby Pro Logic Il Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround software This new technology enables a discrete 5 channel playback with 2 front left and right channels 1 center channel and 2 surround left an
112. ur corners of this unit and the top of the rack etc This unit Peel off 2 the film Fasteners Notes Do not install this unit on top of a slanted surface This unit may fall over and cause injury Make sure you wipe the surface of the rack etc before securing the fasteners Applying the tape to a dirty or wet surface will weaken the sticking power of the tape and this unit may fall as a result 13 En D Te H 4S 7 ELT CONNECTIONS This unit is equipped with two optical digital jacks one coaxial digital jack and two types of analog jacks for connecting external components such as your TV DVD player VCR digital satellite tuner cable TV tuner and game console Further by connecting a subwoofer to this unit you can enjoy reinforced low bass sounds For details on how to connect various types of external components to this unit see pages 15 to 20 CAUTION Do not connect this unit or other components to the main power until all connections between components complete Unplug the power supply cable before changing connections moving or cleaning this unit sl Audio connection Video connection TV This unit DVD player Subwoofer VCR Digital satellite tuner cable TV tuner or game console To prevent cables from becoming unplugged place the supplied Optical fiber cable cable clamp with the open side facing upward attach it to the rear panel of this unit i
113. use electrical shock to the user and or damage to this unit Do not cover this unit with a newspaper tablecloth curtain etc in order not to obstruct heat radiation If the temperature inside this unit rises it may cause fire damage to this unit and or personal injury Do not plug in this unit to a wall outlet until all connections are complete Do not operate this unit upside down It may overheat possibly causing damage Do not use force on switches knobs and or cords When disconnecting the power cable from the wall outlet grasp the plug do not pull the cable Do not clean this unit with chemical solvents this might damage the finish Use a clean dry cloth Only voltage specified on this unit must be used Using this unit with a higher voltage than specified is dangerous and may cause fire damage to this unit and or personal injury YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified To prevent damage by lightning keep the power cable disconnected from a wall outlet or this unit during a lightning storm Do not attempt to modify or fix this unit Contact qualified YAMAHA service personnel when any service is needed The cabinet should never be opened for any reasons When not planning to use this unit for long periods of time i e vacation disconnect the AC power plug from the wall outlet Be sure to read the TROUBLESHOOTING section on common
114. w E Note The front left and right sound beams are output directly to the listening position 3 beam Outputs sound beams from the front left and right and center channels This mode is ideal for enjoying movies with the whole family Because the listening position area is widened you can enjoy excellent quality surround sound over a wider area In addition you can use this mode when the listening position is close to the backside of the wall and the surround left and right beams cannot reflect Press 3BEAM on the remote control to select the 3 beam 3 aly AOA You can achieve a more realistic surround effect if you adjust settings for IMAGE LOCATION in BEAM MENU see page 62 Notes When you play back multi channel sources surround left and right signals are mixed down and output from the front left and right channels The front left and right sound beams are output towards the walls in your listening room If you press 3BEAM SP Pos Corner appears in the front panel display when INSTALLED POSITION is set to ANGLE TO WALL OR CORNER 41 n e gt 2 m gt 2 ENJOYING SURROUND SOUND B Decoder indicators Depending on the input source and the selected surround mode the indicators in the front panel display light up as follows B Surround modes and recommended Status Indicator When PCM signals are being input PCM When DTS digital

Download Pdf Manuals

Related Search

Related Contents

REV.02-14-03-2006 - FRA-NED-ENG-DEU  NOTICE D`UTILISATION  manuel de l`utilisateur 1 • installation  "取扱説明書"  Cisco Systems 2800 Network Router User Manual  Health & Safety Policy  Creative Labs 70SB117000000  Samsung P2570HD Manuel de l'utilisateur  On the Development of Real-Time Multi  MODE D`EMPLOI  

Copyright © All rights reserved. Failed to retrieve file