Yamaha CL5/CL3/CL1 V1.02 Specifications
Contents
1. YAMAHA Specification additions changes for Yamaha CL5 CL3 CL1 V1 02 Thank you for choosing a Yamaha CL series CL5 CL3 CL1 Digital Mixing Console With the CL series firmware version 1 02 some specifications have added or changed since the publication of the Owner s Manual and Reference Manual This manual contains descriptions of the added and changed specifications Mounting limitation for two space Premium Rack processor Reference Manual p 127 A two space Premium Rack processor U76 can be mounted only in an odd numbered rack r g k SSIGN 10 NO ASS A 10 ASSIGN gt lt U76 IN OUT w gt i U76 Dual i z a ASSIGN F C2IN 20UTI r iB a 0 ASSIGN NO ASSIGN f 5 NO ASSIG MOUNT B ill U76 as ae iP P l a M0 ASSIGN K iN our fiid gt NO ASS g U76 Dual iE E gt J ae ae oe E Addition of PATCHING indicator Reference Manual p 136 A PATCHING indicator has been added to the Function Access Area The PATCHING indicator appears when a DANTE INPUT PATCH setting or an I O RACK OUTPUT PATCH setting is changed While this indicator is lit a DANTE INPUT PATCH setting or an I O RACK OUTPUT PATCH setting cannot be changed continuously PORT SELECT Select candidate 1 0 RACK 1 001 IZO RACK 2 YO02 IZO RACK 3 AED IZO RACK 4 YO04 t 4 scene 000 Initial Data Using a Premium Rack with the MIDI PROGRAM CHANGE popup window Reference Manual p 148 The pr2. ETUP screen which is accessed by pressing the SETUP button in the Function Access Area BATTERY MAIN 41 02 POWER SUPPLY QR SUB 41 02 DANTE 3 6 3 0 3 4 1 0 1 0 4 The following items appear BATTERY Status of the internal battery Normally YES LOW or NO when the battery runs down POWER SUPPLY Whether the currently running power supply is internal INT or PW800 EXT MAIN Version number of main CPU SUB Version number of sub CPU DANTE Version number of DANTE module Operation when changing NETWORK settings Reference Manual p 191 After changing settings in the NETWORK popup window which is accessed by pressing the SETUP button in the Function Access Area then pressing the NETWORK button the CL series must be restarted NOTE The NETWORK setting is not changed even if the CL series is initialized Operation when changing settings in the DANTE SETUP popup window Reference Manual p 198 e When settings have been changed in the DANTE SETUP popup window the ACCESS indicator lights while the setting changes are stored on the unit The ACCESS indicator lights when settings for the following are changed Parameters in the DANTE SETUP screen Parameters in the WORD CLOCK screen Patch settings Library operations and AUTO SETUP button operations in the DANTE INPUT PATCH popup window Parameters in the OUTPUT tab of the I O RACK screen In order to apply changes to settings in the DANTE SETUP popup window the unit must
3. I O rack can even be operated from a CL series where w RECALL is not set An I O rack where w RECALL is set for one CL series cannot be set with w RECALL for a different CL series C S G Pro Audio Division 2012 Yamaha Corporation 205YJ A0
4. be turned off then on again however turn the unit off after the ACCESS indicator turns off e f the SECONDARY PORT setting or the IDs for the CL series or the I O rack in the DANTE SETUP popup window has been changed the units must be turned off then on again Follow the steps below to perform the operation NOTE The SECONDARY PORT and CONSOLE ID settings are not changed even if the CL series is initialized Changing the SECONDARY PORT setting 1 Unplug the Ethernet cable from the Dante connectors on the CL series and I O rack NOTE When changing the SECONDARY PORT setting the network topology for the CL series and I O rack must also be changed For example if the setting is changed to DAISY CHAIN while leaving the connection for the REDUNDANT setting it will no longer be possible to transmit audio Before changing the setting first disconnect the cables 2 Confirm the SECONDARY PORT setting for the CL series and the DIP switch setting on the I O rack 3 Turn the CL series and I O rack off then on again 4 After waiting about 1 minute plug the Ethernet cable into the Dante connector on the I O rack and then wait about 20 seconds before plugging the Ethernet cable into the Dante connector on the CL series Changing the ID 1 Turn off the CL series 2 Turn the I O rack off then on again 3 Wait about 1 minute and then turn on the CL series NOTE If the CL series cannot be turned off unplug the Ethernet cab
5. le from the Dante connector on the I O rack turn off the I O rack while it is disconnected from the network then turn it on again and then wait about 1 minute before connecting the Ethernet cable I O rack settings for scene recall Reference Manual p 198 For each CL series unit you can specify which I O rack the information saved on the CL series will be applied to when the CL series is started up and when a scene is recalled When there are multiple CL series units specify the settings so that a scene is recalled to an I O rack from only one CL series Follow the steps below 1 In the Function Access Area press the SETUP button 2 Press the DANTE SETUP button to access the DANTE SETUP popup window DANTE SETUP CONSOLE ID SECONDARY PORT LATENCY ms RACK ID ASSIGN RACK NO UNIT ID DEVICE TYPE 1 YOO1 Rio3224D wiRCL gt 2 Y002 RiosZz24U wi Rll 3 Y003 io 40 1 AREE TE A 60 4 Y004 LR M Rio32240 w Ri setur E 000 a Initial Data 3 In the DEVICE TYPE list set the DEVICE TYPE for the I O rack that you want recalled from the currently selected CL series to an I O rack indicated by w RECALL 4 In the same way for other CL series units specify the DEVICE TYPE setting to set whether or not a scene is recalled to an I O rack NOTE General network settings BIT LATENCY W CLOCK from the CL series where CONSOLE ID is set to 1 are applied globally The head amp of the
6. ocedure for using a Premium Rack has changed for the MIDI PROGRAM CHANGE popup window If you have selected PREMIUM RACK in the TYPE field you can select the rack number in the DESTINATION field and the library number in the LIBRARY NUMBER field HTE i CH1 ch 1 0 00 00 ADMIN Send To MIX1 MIDI PROGRAM CHANGE BANK1 1 Select Program Change Parameters DESTINATION LIBRARY NUMBER SCENI EFFECT PREMIUM RACK 60 ela ia SETU P scene 000 Initial Data MIDI PROGRAM CHANGE BANK1 1 Select Program Change Parameters DESTINATION LIBRARY NAME EFFECT PREMIUM RACK 60 Lt oR OM eT PAE ooo i Initial Data Addition of options when loading a settings file Reference Manual p 170 In the SAVE LOAD popup window you can select whether or not to load Dante settings while loading a settings file _ CH1 ch 1 0 00 00 1 VOLUME NAME Os EAEE FREE SIZE 55 0GB 11 Send To MIXI FILE N ME COMMENT Sethe TYPE TME 60 eaters l SETUP pme 000 i Initial Data WITH DANTE SETUP AND I O RACK button When you turn off the button settings related to DANTE SETUP and the I O rack are excluded when the settings file is loaded NOTE The SECONDARY PORT and CONSOLE ID settings in the DANTE SETUP popup window are not changed even if the WITH DANTE SETUP AND I O RACK button is on Display of version information Reference Manual p 184 Version information has been added to the S
Download Pdf Manuals
Related Search