Winegard DS-1111 User's Manual
Contents
1. 000 r i Epes GW A XNA 1 4 20 NVA HEX NUT NEW CLAMP BRACKET EXISTING CLAMP 1 4 WASHERS BRACKET EXISTING Figure 1 CLAMP BRACKET g FLAT PLATE CARRIAGE BOLTS 1 4 20 x 1 25 NEW CLAMP BRACKET Figure 2 Winegard Company 2001 2451765 Rev 1 042. WINEGARD Installation Instructions Models DS 1111 VM 1111 INSTALLATION OF THIS MOUNT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY FOLLOW THE INSTALLATION INSTRUCTIONS NOTE THIS MOUNT IS NOT DESIGNED FOR APPLICATIONS ON A VERTICAL SURFACE SUCH AS WALLS POLES ETC CAUTION LIMIT SIZE OF TV ANTENNA TO GS 1000 2000 MS 1000 2000 OR A BOOM LENGTH OF 40 OR LESS STEP 1 Assemble satellite dish and mount per manufacturers instructions Do not make fine tun ing adjustment at this time bolts from existing clamp bracket STEP 3 Attach flat plate to existing clamp bracket with 1 4 20 x 1 25 bolts and install the washers and nuts STEP 4 Adjust azimuth and elevation on satellite dish for optimum signal strength per manufactur ers instructions STEP 5 Tighten all hardware on satellite antenna mount including clamp bolt nuts when the opti mum signal strength is achieved STEP 6 Slide S pipe into new clamp and adjust to the approximate desired location See Figure 2 for complete assembly STEP 7 Mount off air antenna to upper mast Run coax downlead and secure it at the same time the DSS wires are installed MAKE SURE TO GROUND BOTH ANTENNA MOUNTS PER SATELLITE AND OFF AIR AN TENNA INSTALLATION INSTRUCTIONS WINEGARD Printed in U S A CARRIAGE BOLTS 1 4 20 x 1 25 STEP 2 Remove 2 clamp tightening carriage 2 ea Winegard Company 3000 Kirkwood Street Burlington IA 52601 2
Download Pdf Manuals
Related Search