Well Traveled Living 60402 User's Manual
Contents
1. TECHNICAL SPECIFICATIONS Ratings 120 V 60 Hz Power consumption 700 800 1500 W Height 210 cm 82 68 Net weight 14 6 kg 32 19 b Insulation class electric halogen patio heater instructions manual Model 60402 60514 ASSEMBLY INSTRUCTIONS To properly assemble this heater you need the supplied assembly wrench or one of your own STEP 1 Fix the bottom pole onto the base using three M6x50 bolts Place the decoration cone onto the bottom pole STEP 2 OPERATING INSTRUCTIONS Place the heater on a firm level surface and plug into a grounded 120 V 60 Hz power outlet Only operate the heater when it is in the upright position and the base is attached This electric halogen patio heater is equipped with 3 heating settings Low Medium and High e To operate the heater on Low press the red switch on the right This switch will have a single white dot near the top Once the low switch is pressed the smaller bottom heating element will glow and radiate heat HEATER CONTROLS e To operate the heater on Medium press the red switch on the left This switch will have two white dots near the top Once the medium switch is pressed the larger top heating element will glow and radiate heat e To operate the heater on High press both the low and medium red switches This will cause both the bottom and top heating elements to glow and radiate heat Although the2. heater is weather resistant DO NOT use when raining or in wet conditions Always disconnect the power cable from the electrical supply when the patio heater is not in use CARE AND MAINTENANCE e Unplug the heater and let it cool completely e When disconnected from the electrical supply clean the outside of the heater with a damp cloth Never use corrosive or solvent cleansers or immerse in water Wait until the unit is completely dry before use e Any maintenance or repairs including replacing the halogen tube should only be carried out by acompetent person STORAGE If the heater will not be used for a long period of time store it in a cool dry location To prevent dust and dirt build up use the original packaging to repack the heater 23 1 24 23 26 27 1 28 1 29 30 3 32 33 34 35 36 37 DO NOT cover the heater with anything during operation or until if has completely cooled Don t wrap the power supply cord aroud the heater The heater must be handled with care and avoid vibration or hitting The heater must be securely grounded during operation If the heater gets damaged it must be repaired by a professional When the power supply cord is damaged it must be replaced by an authorized agent or other professional to avoid danger he heater must not be positioned under a socket Not for use by unsupervised children lt is not safe to install
3. shall be visible after the heater has been installed It shall not be placed on the back of portable heaters The heater must be placed with a clearance of 40 to the wall and 12 to the ceiling The unit must be correctly installed according to the instructions see steps 1 7 Make sure the head is at least 1 8 m 6 ft from the floor The unit must be securely placed on a horizontal and flat surface The heater is at high temperature during operation It sfays hot for a period after shut down Potential danger would occur when touching it during this period Don t place the unit close to curtains and or other flammable qb ects otherwise there will be a danger of catching fire
4. the heater by a swimming pool or in a bafhroom shouer area he heater is for household use only It is not safe to use on a building site greenhouse barn or stable where there s flammable dust he head of the heater is at high temperature during operation Unplug the unit and wait till it cools before cleaning Don t use this heater in places where causticity or volatile air exists i e dust steam gas etc Don t use this heater as a cloth dryer or towel dryer y y Don t use this heater as a sauna heater Don t use this heater as a room heater Don t use this heater in places of animal propagating and raising Don t immerse this heater into water for cleaning The heater should be plugged into a socket which is easily visible and reachable Two dark points may exist on the surface of the heating elements during the first few minutes after it is turned on This is normal and will not affect the performance of the unit A tilt switch is fitted inside the unit for safety purposes When assembling keep clear from any flammable and combustible material STEP 3 Connect the middle pole with the bottom pole by screwing together STEP 4 Connect the top pole with the middle pole by screwing together STEP 5 Place the power cord plug through the top pole middle pole and bottom pole Pull the power cord through the bottom of the base as far as it will go STEP 6 Place the lamp he
5. ad assembly onto the top pole Secure it with two 8mm screws Step 7 Fix the power cord on the rubber base by using four 15 mm screws Wy full assembled view Z N WARNING Only use this halogen heater on a firm solid horizontal surface where all the feet on the base are in contact with the floor Should the heater be tilted or fall over The auto cutoff switch will activate NOOR ON Sit the heater outside or in a large open area and well away from any obstructions such as branches or where the heater is near any objects that can be affected by heat such as furniture curtains or other flammable objec Do Do Do Do Do Do no no no no no no patio Do Do no no s minimum distance 1 m 3 28 ft use near bath tubs wash areas or swimming pools use in unventilated areas use where gas paint or other flammable goods are stored push any items through obstruct or cover the grill of the heater head position immediately above or below an electrical socket move when connected to an electrical supply Always wait for the heater to cool down before storing away touch the heater head when in use leave the heater unattended when in use especially when children and or animals are in the vicinity The indication of the different positions of switches shall be visible from a distance of 1 m 3 28 ft The marking concerning covering
Download Pdf Manuals
Related Search