Triarch 33034 User's Manual
Contents
1. Ce mm A NR NS Rh er Tt N fH mrmmrr 18 gt INSTALLATION INSTRUCTIONS PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS AS YOU MATINEE THEM ATA LATER CAUTION Tum off the main power at the circuit breaker before Installing the fixture In order to prevent possible shock Remove the fixture and the mounting package from the box and make sure that no parta are missing by referencing the Wlustrations on the Instaflation Instructions i 6 FOR CEILING MOUNT Fig 4 amp 6 1 A Place the 8 32 HEX NUTS 3 onto the 8 32 FIXTURE MOUNTING SCREWS 4 and attach the FIXTURE MOUNTING SCREWS to the MOUNTING BRACKET 2 or none plate whichever is provided Do not tighten the HEX NUTS at this lime G ne bture uses a single 1 8 PS NIPPLE 4 for mounting thread the 1 5 IPS HEX NUT 3 onto the NIPPLE and gcrew the NIPPLE into the MOUNTING BRACKET 2 without tightening the HEX NUT Fig 5 2 Pull the power supply wires out from the OUTLET BOX 1 and mount the MOUNTING pan hl the universal mounting piste to the OUTLET BOX using MOUNTING 3 Attach the power supply wires to the fixture lead wires b conmecting BLACK to BLACK 6 and WHITE to WHITE 5 Attach the POWER SUPPL GROUNO WIRE 7 from the OUTLET BOX 1 and the FIXTURE GROUNO WIRE from the fixture to the green GROUNO SCREW 9 on the MOUNTING BRACKET 2 or connect both wires together using the correct siz2. ADED RING onto the LOOP 7 Screw in ON bubs that GOnot exceed the maximum watlage specitied on the fiture s wattage rating label into the sockel s on the fidure NOTE IN ihe bottom opening of the lamp compartment to the fixture fs too narrow to alow pocess to tha Sight bul s unscrew the two decorative screws at the lop of the lang to allow 8 lo drop down for famp INSTALLATION COMPLETED
3. e of wire connectors 4 Pinon the CANOPY 11 on the fsture over the PL mounting screws or Nil E 4 and adjust the 6 32 fixture mounting screws or NIPPLE un they out rom the CANOPY 1 4 Remove the CANOPY and secure the position of the ficture screws Gr NIPPLE by tightening the HEX NUT S 3 against the MOUNTING BRACKET 2 Place the CANOPY back onte the fixture mounting screws or NIPPLE and secure Into place using the DECORATIVE NUTS 12 provided 5 Screw in Mgnt butbs that do not exceed the maximum watlage specified on the fixture s wattage rating label Into the socket s on the fixture oo INSTALLATION COMPLETED 3 Open up the end Wnks of te CHAIN 17 and attach one end of the CHAIN onto FIXTURE LOOP 16 Slide tha THREADED RING 16 from the SCRE 9 and the CANOPY 15 onto te CHAN in thet WM CHAIN on to the SCREW COLLAR LOOP Close the ends of 4 Unravel the future s lead and grourid wires and thread the lead and every oer lok ot the CHAN 17 and 24 through the SCREW COLLAR LOOP 6 4 assambly starting with the chain nk atached to the FIXTURE S LOOP 18 Attach the power supply wires to the fixture ead wires by connecting the BLACK POWER SUPPLY WIRE 11 10 the SMOOTH FIXTURE LEAD WIRE 12 and the 6 Slide the CANOPY 15 and the THREADED RING 16 of the SCREW COLLAR LOOP 46 up the CHAIN 17 Place tha CANOPY over the BOX 1 and secure in place by screwing the THRE
Download Pdf Manuals
Related Search