Triarch 31551 User's Manual
Contents
1. TI ASSEMBLY INSTRUCTION ITEM 31551 1 Tighten outlet box screw longer 2 full turns into mounting strip Secure with 5 32 nut to be fully tightened later The outlet box scew should extend long enough to protrude the canopy when it is mounted 2 Fasten mounting strip onto outlet box using outlet box screw shorter 3 Connect the wires from the fixture to the power supply wires from outlet box Cover with wire connectors a Twist together white wire from the fixture with white wire from outlet box Cover with connectors b Twist together black wire form the fixture with black wire form outlet box Cover with connectors c Wrap the ground wires from the fixture and outlet box around the green ground screw located on the mounting strip Tighten the green ground screw to the mounting strip 4 Place the canopy over outlet box Let heads of outlet box screw longer come through the holes of the canopy then secure by tightening with cap nut 5 Carefully unpack the glass shade from the box and put the glass clip on the glass insert the screw through the hole of the glass Secure with cap nut 6 Use the same method screwing the other side of the glass Install the bulbs not included into socket Do not use greater than 60 watt the bulbs 8 Restore electric power and test your new fixture N NOTE Carefully remove the fixture from the carton Check that all parts shown in package parts 1 and parts 2 are included Be carefully2. not to misplace any of the screws or wire connectors which are needed for installing the fixture Package parts Wire connector Glass shade 1 Mounting strip Glass clip 1 Screw 2 Green ground screw 5 32 Nut Outlet box screw Support screw Cap nut NNNN gt gt N WHITE WIRE OUTLET BOX WIRE CONNECTOR GREEN GROUND SCREW OUTLET BOX SCREWS GROUND WIRE BLACK WIRE WIRE CONNECTOR MOUNTING STRIP SUPPORT SCREW 5 32 NUT CANOPY GLASS CLIP SCREW
Download Pdf Manuals
Related Search