Triarch 31400/1 User's Manual
Contents
1. E D B A C Assembly instruction for 31400 1 31400 1 socket ring check ring fixture bracket lock up nut 1 Connect electrical wires at Junction box and secure wall bracket A 2 Secure fixture B with lock up nut C provided 3 Secure glass F with check ring D socket ring E 4 Install light bulbs not provided OUTLET BOX GROUNDING WIRE MACHINE SCREWS MOUNTING PLATE GROUNDING SCREW CAUTION DISCONNECT POWER DURING INSTALLATION 1 If you are replacing an existing fixture disconnect and remove the old fixture Expose the supply wiring from the outlet box 2 Thread the machine screws into the opposite side of the mounting plate from the green ground screw Lock the machine screws into place with lock nuts 3 Fasten the mounting plate to the outlet box using the two screws supplied with the outlet box 4 Spread the electrical wires so tbat the black wires are on one side of the outlet box and the white wires are on the other side 5 Grounding instructions A On fixtures where mounting plate is provided with a green ground screw and two raised dimples Wrap ground wire from outlet box around green ground screw and tighten STANDARD MOUNTING PLATE INSTALLATION INSTRUCTIONS 2004E OUTLET BOX MOUNTING SCRWEWS LOCK NUTS CAP NUTS FIXTURE B On fixtures where mounting plate is provided with a green ground wire attached Connect mounting plate g2. round wire to ground wire from outlet box with wire connector not provided If fixture is provided with ground wire Connect fixture ground wire to ground wire From outlet box with wire connector not provided After following the above steps Never connect ground wire to black or white power supply wires 6 To make electrical connections Connect the white wire s from the fixture to the white wire of the outlet box Connect the black wire s from the fixture to the black wire of the outlet box NOTE Black outlet box wire may be red round amp smooth and or have copper conductor White outlet box wire may be square amp ridged and or have a silver conductor 7 Place fixture against mounting surface allowing the machine screws to pass through the fixture cover plate Secure with cap nuts
Download Pdf Manuals
Related Search