Triarch 29582 User's Manual
Contents
1. ASSEMBLY INSTRUCTION ITEM 29587 1 Fasten mounting strip onto outlet box using 2 outlet box screws 2 Thread 2 1 8 nipple into center hole of mounting strip about 4 complete turns Lock in place with lock washer and hex nut This nipple should extend long enough to protrude through the canopy when it is mounted Adjust as necessary see step amp 3 Guide wire through 10 nipple Secure with hex nut Then place decorative column glass center colum steel ring decorative cap pipe pipe lid and secure with loop 4 Using two pliers twist open one link at the end of chain Hook it to the loop and close the link Place a piece of cloth between the pliers jaws and the chain link to prevent scratching the link finish 5 Tighten the screw collar loop to 2 1 8 nipple Place the ring and canopy over the chain on the fixture Using two pliers twist open the link at the other end of the chain Connect the whole fixture to hook the screw collar loop on the ceiling and close the link 6 Weave the fixture wires up through the chain links through the screw collar loop and through the nippl in the mounting Position both outlet box supply wires and the fixture wires otside of the outlet box to facilitate connection After connection step 7 is complete carefully position wires back inside outlet box 7 Connect the wires from the fixture to the power supply wires from outlet box a Twist together white wire from the fixture with white wire from outlet2. HING SOCKET GLASS BALL FIXTURE BODY ARM nm HEX NUT SMALL GLASS BALL 348 ee eras _ _S ee naan
3. box Cover with wire connectors b Twist together black wire from the fixture with black wire from outlet box Cover with wire connectors c Wrap the ground wires from the fixture and the outlet box around the green ground screw located on the mounting strip Tighten the green ground screw to the mounting strip 8 Place the canopy all the way to the ceiling and tight the ring onto the screw collar loop until the canop is firmly held against the ceiling 9 Instail bulb not included into socket Do not use greater than 60 watt bulb 10 Position small glass ball cap and secure with finial NOTE Carefully remove the fixture from the carton Check that all parts shown in package parts 1 and part 2 are included Be carefully not to misplace any of the screws or wire connectors which are neede for installing the fixture Package parts 1 Package parts 2 _ Description No ov Pieces Description No ov Pieces Chain Finial Ring Cap Hex nut Outlet ox screw Wire Connector Hex Nut Screw Collar Loop Nippie Small Glass Ball ys Shek oe Canopy i f L achwrrt gt MOUNTING STRIP OUTLET BOX SCREW 2 1 8 NIPPLE CANOPY RING SCREW COLLAR LOOP CHAIN MAIN WIRE z GROUND WIRE PIPE LID 4 112 PIPE HEX NUT DECORATIVE CAP s STELL RING 10 1 4 NIPPLE m PIPE LID 6 3 PIPE GLASS CENTER COLUMN SOCKET RIN DECORATIVE ikes BUS
Download Pdf Manuals
Related Search