Home
TP-Link TL-POE10R V3 Quick Installation Guide
Contents
1. The power of Ethernet device is suggested to be under 10W Now the Ethernet device can work normally with data and power The topology of this network is as follows Notebook With Wireless Adapter PoE Splitter ME CAT5 UTP Cable TL POE10R 7 Power amp Data au gt PoE Switch TL SF1008P oe Wireless AP Appendix Specifications Standards IEEE 802 3 IEEE 802 3u IEEE 802 3af Voltage Output Power Output One DC Power port Cabling Type LED eue FCC CE Emissions 40 C 70 C 40 F 158 5 90 RH Non condensing
2. gt One Power Cable gt This User Guide V cf Note Make sure that the package contains the above items If any of the listed items are damaged or missing please contact with your distributor Chapter 1 Introduction 1 1 Overview of the Product Thank you for choosing the TL POE10R PoE Splitter The PoE Splitter fully complies with IEEE 802 3af standard and can work with all IEEE 802 3af PoE compliant PSE Power Source Equipment or PoE Injector such as TP LINK s TL SF1008P or TL POE150S to deliver 12V 9V or 5V Direct Current to the device which do not support PoE PoE Power over Ethernet technology allows the existing Ethernet infrastructure to transmit electrical power along with data to remote IP endpoints over the Ethernet cables which can greatly save the cost of the external power cables Your network can benefit from PoE technology for it will ensure the normal working status of your network while keep the existing Ethernet infrastructure secure amp Note TL POETOR is applicable to the device that has no external connections other than the Ethernet cables 1 2 Features gt Complies with IEEE 802 3 IEEE 802 3u IEEE 802 3af standards Data and Power carried over the same cable Supports optional 5V DC 9V DC or 12V DC power supply Supports Plug and Play for the devices without any configuration gt Elegant appearance with space saving mini size Chapter 2 Identifying External Components e
3. TP LINK User Guide TL POE10R PoE Splitter 7106503409 COPYRIGHT amp TRADEMARKS Specifications are subject to change without notice TP LINK is a registered trademark of TP LINK TECHNOLOGIES CO LTD Other brands and product names are trademarks or registered trademarks of their respective holders No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from TP LINK TECHNOLOGIES CO LTD Copyright 2011 TP LINK TECHNOLOGIES CO LTD All rights reserved http www tp link com FCC STATEMENT FC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures gt Reorient or relocate the r
4. eceiving antenna gt Increase the separation between the equipment and receiver gt Connect the equipment into an outlet on a circuit different from that to which the receiver is connected gt Consult the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressiy approved by the party responsible for compliance could void the user s authority to operate the equipment CE Mark Warning CE This is a class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures SAFETY NOTICES gt Do not use this product near water for example in a wet basement or near a swimming pool gt Avoid using this product during an electrical storm There may be a remote risk of electric shock from lightning CONTENTS Package Contents Chapter 1 Introduction 1 1 Overview of the Product 1 2 Features Chapter 2 Identifying External Components Chapter 3 Connecting the PoE Splitter Appendix Specifications Package Contents The following items should be found in your package TL POE10R PoE Splitter One Ethernet CAT5 UTP Cable
5. i D es 12V 9V SV POWER DATA IN I 8 LT Power mode switch You can choose the DC output of 12V 9V or 5V by turning the switch to the left or right Please make sure that the output is correct a different voltage may destroy the device POWER DATA IN Connect to the PSE or PoE Injector with a CAT5 UTP cable LAN OUT Connect to DC OUT Connect to the the Ethernet device power port of the Ethernet with CAT5 UTP cable device with the provided to transmit data power cable to supply the power of 5V 9V or 12V DC Im RE LAN OUT at OUT PWR Power LED a steady green light indicates that the PoE Injector can supply power Chapter 3 Connecting the PoE Splitter You can use TL POE10R PoE Splitter with PSE or PoE Injector to expand your network to where there are no power lines or outlets where you wish to fix devices such as APs IP Cameras or IP Phones etc The following steps will tell you how to connect the PoE Splitter correctly 1 Use a CAT5 UTP cable to connect a PoE port of the PSE ex PoE Switch to the POWER DATA IN port 2 Choose the appropriate DC output by the Power mode switch gt Note Please make sure that the output is correct a different voltage may destroy the device 3 Connect the LAN OUT port to the Ethernet device with CAT5 UTP cable for data transmitting 4 Connect the DC OUT port to the power port of the same Ethernet device with the provided power cable amp Note
Download Pdf Manuals
Related Search
Related Contents
Page 1 Page 2 消防庁登録機関認証 コンノ麦クトジエネレ・タ 全てが ターボファン保証書 Operator`s Manual - Leaf Blowers Direct Chief X-Large FUSION LT Editor Ver.2.0 Device Connection Manual - Pro Pan/Tilt Head with Multiple Protocol Interface VPT-501, VPT (様式第5号) 年度末モニタリング結果公開用様式 平成24年度 施設名 Mise en page 1 Installationshandbuch PDF Copyright © All rights reserved.
Failed to retrieve file