Home

Toshiba L2353/50 User's Manual

1. a Connect the aerial to the ANT socket on the rear of the television If you use a decoder and or media recorder connect through the decoder and or media recorder to the television SCART cables CA Connect the video recorder IN OUT or decoder TV socket to the television Connect the media player SAT socket to the decoder MEDIA REC socket Before running Auto Tuning put your decoder and media recorder to Standby HDMI High Definition Multimedia Interface is for use with a DVD decoder or electrical equipment with digital audio and video output It is designed for best performance with 1080i high definition video signals but will also accept and display 480i 480p 576i 576p 720p and 1080p HDMI1 also support VGA SVGA XGA WXGA and SXGA NOTE Although this television is able to connect to HDMI equipment it is possible that some equip ment may not operate correctly A wide variety of external equipment can be connected to the back of the television there fore the relevant owner s manuals for all additional equipment must be referred to If the television automatically switches over to monitor external equipment return to normal televi sion by pressing the desired channel button To recall external equipment press to select NOTE Due to copy protected signal in some DTV programme non scrambled content and scram bled content with copy freely CGMS A 00 are ava
2. NOTE When Parental Control is activated you will need to enter the 4 digit password before you enter the DTV Settings submenu under the SETUP menu After auto tuning all the channel blocks will be cleared 1 In the DTV Settings menu press A or V to select Parental and press to enter the submenu Enter the 4 digit password amp Press lt or gt to set the age rating from age 4 18 or select None to turn this function off or Block All NOTE This function is available for pro grammes with Age Rating information Engish Standby Update Control In the DTV Settings menu press A or Y to select Standby Update Control Press lt or gt to select Enable or Dis able Standby Channel Update If the Standby Channel Update is set to On when the TV is in standby mode Digital Tuning is automatically executed and any new chan nels are saved 2 Press lt or gt to select On or Off In the DTV Settings menu press A or V to select Standby Channel Update NOTE Standby Channel Update is only available when Standby Update Con trol is Enable Channel Grouping There are Video Radio and Text services combined in a channel list for DTV services The function provides the selection of channel change with one service group or among all services by pressing P and P W 2 Press lt or gt to select On or Off In the DTV Settings menu press A or Y to select Channel Grouping DTV Settin
3. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television use an HDMI to DVI cable If connecting a PC with an HDMI terminal use an HDMI cable type A connector A separate ana logue cable is not necessary NNT IAN the back of your television Computer HDMI to DVI adapter cable not supplied For 32W23 32 39L23 17 Engish Ton TOSHIBA the back of your television o HDMI 1 Computer HDMI to DVI adapter cable not supplied For 50L23 For acceptable PC and video signal formats see page 19 NOTE The edges of the images may be hidden If connecting a certain PC model with a unique PC signal the PC signal may not be detected correctly 18 Acceptable Video signals through HDMI terminals Resolution H Frequency KHz V Frequency Hz 480i 15 750 60 000 480p 31 500 60 000 576i 15 625 50 000 576p 31 250 50 000 720p 37 500 50 000 720p 45 000 60 000 1080i 28 125 50 000 1080i 33 750 60 000 1080p 27 000 24 000 1080p 28 125 25 000 1080p 33 750 30 000 1080p 56 250 50 000 1080p 67 500 60 000 Acceptable PC signals through HDMI terminals Pixel Clock MHz 640 x 480 31 469 25 175 Negative Negative 800 525 640 x 480 37 861 31 500 Negative Negative 832 520 640 x 480 37 500 31 50
4. Black White Level This function increases the strength of dark areas of the picture which improves picture definition In the Picture Settings menu press A or Y to select Black White Level Press lt or gt to adjust the level from Off Low Middle or High The effect depends on the broadcast and is most noticeable on dark colours Cinema Mode The static gamma feature allows you to adjust A movie film s picture runs at 24 frames a sec ond whereas movie software such as DVD etc that you enjoy watching on television at home runs at 30 NTSC or 25 PAL frames a second To convert this signal to reproduce a smooth motion and picture quality select the Cinema Mode Press lt or gt to select On or Off In the Picture Settings menu press A or Y to select Cinema Mode Colour Temperature Static Gamma the levels of black in the picture 1 In the Picture Settings menu press A or Y to select Static Gamma 2 Press lt or to select the number of Static Gamma 5 5 Reset This feature resets all picture settings to the factory settings In the Picture Settings menu press A or Y to select Reset and press to reset settings NOTE If any picture settings have not been changed Reset is not available Active Backlight Control When the Active Backlight Control feature is Colour Temperature increases the warmth or coolness of a picture by increasing the red or blue
5. tempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and inter connec tions between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels on equipment WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions See page 5 DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS THE MAINS PLUG IS USED AS A DISCON NECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE Do Not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers table cloths curtains etc Overheating will cause damage and shorten the life of the equipment DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DO NOT place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times DO NOT us
6. in the United States and other countries MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PER SONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSE BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDI TIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LLA L L C SEE HTTP WWW MPEGLA COM 67 DIVX HD DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Cover
7. 3 or 16 9 Picture Mode Press MENU to change the settings when viewing a video Press lt or gt to select EJ and press 8 to select Standard Mild Movie or Dynamic Goto Time The feature allows you to view a selected time during the video Ge Press MENU to change the settings when viewing a video 2 Press lt or gt to select k and press B Use the number key pad on the remote to enter time Press to go to the input time Standard Input search time dt Standard E Native C Folder L 00001 0003 lt 50 te oot avi Goto Tine E Move OR Select 49 Engish HDMI CEC Control This feature uses CEC Consumer Electronics Control technology and allows the control of Toshiba HDMI CEC compatible equipment from the television s remote control NOTE Not all Toshiba products currently support HDMI CEC Equipment Control The HDMI CEC mode on the television s remote control allows the control of connected HDMI CEC equipment being watched To control the HDMI CEC input source first select the equipment with HDMI CEC input source selection then switch the mode on the remote control to HDMI CEC and press any buttons The available functions are dependent on the equipment connected Not all the remote con trol keys may be available Please refer to the operation manual for each piece of equipment connected Select HDMI CEC Device 1 Press A list appears on screen sho
8. NOTE When a DVD movie with subtitle is playing back this mode may not work correctly Base Colour Adjustment The Base Colour Adjustment feature allows the adjustment of individual colours to suit per sonal preference This can be useful when using an external source It only can be adjusted when 3D Colour Management is set to On 1 In the PICTURE menu press A or Y to select Base Colour Adjustment and press to enter the submenu o Press A or to select an item you want to adjust and press Base Colour Adjustment Hue Saturation Brightness C Red E Green E Blue E Yellow E Magenta E Cyan Reset Edit Back Press lt or gt to select Hue Saturation or Brightness Base Colour Adjustment Saturation Brightness 0 O Press A or to adjust the settings as required NOTE In the PC Input mode this function is not available 40 Digital Noise Reduction DNR Digital Noise Reduction enables you to soften the screen representation of a weak signal to reduce the noise effect 1 In the PICTURE menu press A or to select DNR 2 Press lt or gt to select Off Low Mid dle or High NOTE This function is not available for HDMI input MPEG NR Noise Reduction When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated Using the MPEG NR feature reduces this ef fect by smoothing out the edges 1 In the PI
9. RETURN on the remote to col E lapse the list B The information will be removed by time out about 15 sec or press 8 to exit O Press lt or gt to select Md and press to select One or Folder 43 Engish Audio Codec File Extension Enjoy Music through USB Port The MP3 Player allows you to playback music files from a USB storage device Bit Rate MPEG1 Layer2 MP3 Bit Rate 8Kbps 384Kbps Sampling rate 16KHz 48KHz MPEG1 Layer3 MP3 Bit Rate 8Kbps 320Kbps Play Music Files Insert a USB storage device and press on the remote Use A or Y to select MEDIA and press GX Press lt or gt to select Music and press to enter the submenu Press A or Y to select the folder you wish to play and press to enter Press P Aor P Y to page up or down MM Up Folder B ootnes BY oo2uma BE 003 20 Sampling rate 16KHz 48KHz Press A or Y to select the desired music and press to play Folder L 1c 00001 00003 SALUE E a a a a 001 MP3 Pause El Move K Select RETURN Back When listening music press lt or gt to DO Play or pause the selected music e Kl Rewind the selected music Ed Fast forward the selected music El Go to the previous music El Go to the next music D Stop play E Select the desired repeat interval Repeat Off Repeat One Repeat the selected music once Repeat Folder Repeat all music fil
10. Responsible for CE Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp z 0 0 ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland This product is labeled with CE Mark in accordance with the related European Directives notably Low Voltage Directive 2006 95 EC Electromagnetic Compatibility Directive 2004 108 EC and RoHS Directive 2011 65 EU Furthermore the product complies with the Ecodesign Directive 2005 32 EC EuP and 2009 125 EC ErP and its related implementing measures If this product has an integrated Wireless LAN feature the Radio Equipmen and Telecommunications Terminal Equipment Directive 1999 5 EC is also applicable DVB is a registered trademark of the DVB Project TOSHIBA Television Central Europe Sp z 0 0 2013 All rights reserved Reproduction in whole or part without written permission is strictly prohibited TOSHIBA Television Central Europe Sp z 0 0 ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland Specification is subject to change without notice TOSHIBA Television Central Europe Sp z 0 0 2013 All rights reserved Reproduction in whole or part without written permission is strictly prohibited TOSHIBA Television Central Europe Sp z 0 0 ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland Specification is subject to change without notice
11. TV content today just connect your aerial and tune in Keep up to date New channels are launched on Freeview from time to time along with other updates to the service So it pays to retune your digital TV periodically to make sure your Digital TV Radio channels are up to date To retune your Toshiba Digital TV please refer to the following page Alternatively find out more on the dedicated Freeview website www freeview co uk retune Freeview co uk Freeview service is subject to availability Aerial upgrade may be required Engish Re tuning TOSHIBA Freeview products Goes This guide can be used to help you re tune the following product with the remote control below ae Make sure your TV is on and press 80 TOSHIBA Digital TV for the BBC News channel 1 Press MENU and press lt or gt to select SETUP Text mE om u u PAAA E IF IE EE j 2 Press A or Y to select 8 9 O te O Auto tuning and press aa X to enter the sub DTV Se menu AN P Vv 3 Press A or V to select Tuning Mode and press lt or P to select ATV DTV or ATV and DTV EXIT gt RETURN 4 Press A or to select Start Scan and press P to start Auto tuning pen a oe TOSHIBA Online Support TOSHIBA Customer Helpline 0871 495 0730 E ory A N O This process may affect any saved information stored on your product including your favourites list Please consult your instruction manual or contac
12. of the speakers con nected to the television via an AV amplifier Ensure that the connected AV amplifier and HDMI CEC equipment are selected in the input source selection and that the Speaker Prefer ence is set to Amplifier in the HDMI CEC Control menu NOTE When the AV Amplifier is switched on its input source changed or the volume adjusted the sound will be output from the AV Amplifier s speakers even if TV speakers has been selected Turn the television off then on again to output the sound from the TV s speakers The full function may not work and is depend ent on the amplifier being used Enable HDMI LINK When the Enable HDMI LINK is set to On it allows the other functions to be enabled Press MENU Press lt or gt to select PREFERENCES and press to enter the submenu fic PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or Y to select HDMI CEC Con trol and press x to enter the submenu PREFERENCES HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration Enter Back Press A or V to select Enable HDMI LINK and press lt or gt to select On or Off HDMI CEC Control Enable HDMI LINK Auto Power On On Auto Standby On Amplifier Control On Speaker Preference TV Speakers EES 51 Engish Auto Power On The Auto Power On setting allows the televi sion to be automatic
13. tint In the Picture Settings menu press A or Y to select Colour Temperature and press P Press A or V to select Colour Tem perature and press lt or gt to select Medium Warm or Cool to suit your preference Colour Temperature Colour Temperature 4 Medium Red Level Green Level Blue Level Press A or V to select Red Level Blue Level or Green Level and press lt or gt to adjust the settings as required activated High mode will control the backlight ing levels depending on various scenes such as picture motion bright scene or dark scene Low mode will control the backlighting level on dark scene In the Picture Settings menu press A or Y to select Active Backlight Control Press lt or gt to select Off Low or High Auto Brightness Sensor When the Auto Brightness Sensor is activat 39 ed it will automatically optimise the backlight ing levels to suit ambient light conditions Press lt or gt to select On or Off In the Picture Settings menu press A or Y to select Auto Brightness Sensor Engish 3D Colour Management When 3D Colour Management is set to On it allows the Base Colour Adjustment feature to become available You can adjust the picture colour quality by se lecting from 6 base colour adjustments Red Green Blue Yellow Magenta or Cyan 1 In the PICTURE menu press A or to select 3D Colour Management Press lt or gt to select On or Off
14. 0 Negative Negative 840 800 x 600 35 160 36 000 Positive Positive 1024 800 x 600 37 879 40 000 Positive Positive 1056 800 x 600 48 077 50 000 Positive Positive 1040 800 x 600 46 875 49 500 Positive Positive 1056 1024 x 768 48 363 65 000 Negative Negative 1344 1024 x 768 60 023 78 750 Positive Positive 1312 1280 x 768 47 776 79 500 Negative Positive 1664 1360 x 768 47 712 85 500 Positive Positive 1792 1280 x 1024 63 981 108 000 Positive Positive 1688 1280 x 1024 79 976 135 000 Positive Positi 1688 1920 x 1080 67 500 148 500 Positive Positi 2200 Resolution H KHz H Polarity V Polarity H Total V Total 19 Using the Controls While all the necessary adjustments and controls for the television are made using the remote control the buttons on the television may be used control some functions Engish Common Interface DVB COMMON INTERFACE Volume or channel 8 USB _ Ei Fil REN HDMI 2 INPUT H Ei SOCKET z jz ow Power fe b i Up down G Programme Volume Source IR LIGHT SENSOR Headphone RED LED Standby GREEN LED Power on For 32W23 32 39L23 Common Interface DVB COMMON INTERFACE simi usB j l S HDMI 2 INPUT a Fj SOCKET a WE Power E Os Up down_ Volume or channel Prog
15. 30fps H 264 Main Profile and High Profile Level 4 1 MPEGa2 Main Profile High Level MPEG2 PS MPEG2 1080P 30fps MPEG2 Main Profile High Level H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEG4 Simple Profile and Advanced Simple Profile Level 5 H 264 MPEG1 MPEG2 MPEG4 H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEG2 Main Profile High Level MPEG4 Simple Profile and Advanced Simple Profile Level 5 divx div AVI 1 0 2 0 DMFO 1 2 DivX 3 11 DivX 4 12 DivX 5 x DivX 6 1080P 30fps MPEG4 Simple Profile and Advanced Simple Profile Level 5 AVI 1 0 2 0 DMFO 1 2 H 264 MPEG1 MPEG2 MPEG4 DivX 3 11 DivX 4 12 DivX 5 x DivX 6 H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEG2 Main Profile High Profile MPEG4 Simple Profile and Advanced Simple Profile Level 5 AVI 1 0 2 0 MJPG Motion JPEG 640x480 30fps flash formats H 264 Sorenson H 263 H 264 1080P 50fps Others 1080P 30fps 46 H 264 Main Profile and High Profile Level 4 1 MP4 GMC is not supported Some files may not be played Play Video Files O Press MENU to change the settings when viewing a video 1 Insert a USB storage device and press on the remote Use A or Y to select MED
16. 39 3D Colour Management cece 40 Base Colour Adjustment c cee 40 Digital Noise Reduction 0 eee 40 MPEG NR Noise Reduction 00 40 Enjoy Photos through USB Pott 41 View Photo Files s ecstcsesssvssscceseasccomennessens 41 Using Slide SHOW 04 ccicsrcsasssveeseseressreereceses 42 Repeat Settings for Slideshow 0 42 Set IMtSrval TIME sc cicscesscecceetccsncaceceuceveesecs 42 Using the Play Listinn 42 Background Music PIN OLO IOs sc sccnde teed cecoesecnn ces cease a ai iaa Enjoy Music through USB Port 44 Play Music Files sciccscestsavthevevctscnr access 44 Repeat Settings srren 45 Using the Play List eee 45 MUSIC INTO aaa ccttnay 45 Enjoy Videos through USB Port 46 Play Video FilSic cc20teseaseaeeseiceeeivecc 47 Repeat Settings 0 0 0 ceceeeseeeeeeeeeseeeeeee 48 SO svstiadedeccaicass chive a i 48 Using the Play Uistisicinastscsrccsanancucses 48 SOW FOMWaAIG ccccssevsctedecsservisastescessetaszeressees 48 Step Forward cece ee eeeeceeeeeeeeeneeeees 48 Mid CO NINO i esien nii 48 Aspect RallOAcdinscssecnicssascntranamennendtss 48 Picture MOC iisce ssceses sass cccesesons reczesasentrecesceres 48 Goto TMS srair tonser kenehne inia basain 49 HDMI CEC Control 2 ccceseceeseeeeees 50 Equipment COnt l sesgos 50 Select HDMI CEC Device ee 50 HDMI CEC Menus ccsseceeeeeetenees 51 ONE TOUCH Playin 51 System S
17. CTURE menu press A or to select MPEG NR Press lt or gt to select Off Low Mid dle or High Enjoy Photos through USB Port The Photo Viewer allows you to playback image files from a USB storage device Photo Resolution 15360x8704 Base li aig 1920x8 x 1088x8 Progressive 1024x768 non interface 9600x6400 interface 1200x800 9600x6400 View Photo Files Press A V lt or gt to select the folder you wish to view and press 8 to enter 1 Insert a USB storage device and press Press P A or P V to page up or down on the remote Use A or Y to select MEDIA and press GX Press A V lt or gt to select the de sired photo and press to view o Press lt or gt to select Photo and press to enter the submenu 41 Press MENU to change the settings when viewing a photo Press lt or gt to El Go to the previous photo El Go to the next photo E Select slide show mode B select repeat mode I Select the desired interval time B Clockwise rotation 90 E Counterclockwise rotation 90 E show play list El Set the background music g Photo information and press to confirm the setting Using Slide Show This view allows you to watch a slide show of the photos In this view mode the only content that locates on the same directory shall be played Press MENU to change the settings when viewing a photo 2
18. Channel Date Time mm Se Fri 27 Aug 19 J LIVE Bask etball NBA 20 00 21 00 Judge Judy 21 00 22 00 Jag 22 00 22 30 AFL Premiership Season 2011 22 30 23 00 O Delete Press A or to select the desired programme and press to edit NOTE Press the mm button on the remote to delete the timer Programme Timers 07 42 58 Fri 27 Aug ONE HI Programme Timers 10NEHD 4 1 ONE HD gt 2010 08 27 Start Time 08 05 08 27 End Time 08 35 08 27 Repeat ONCE Subiitle of Save Press A or to select Channel Date Start Time End Time Repeat or Subtitle and press lt or gt to adjust the settings as required Press to save the settings NOTE After adjustment the TV clock may not match the time in the EPG Programme Guide The EPG Programme Guide time follows the broadcast stream time which can not be adjusted 57 Engish Panel Lock disables the buttons on the televi Panel Lock sion All buttons on the remote control can still be used 1 Press MENU Press lt or gt to select PREFERENCES and press 6 to enter the submenu 4 0 PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or to select Panel Lock and press lt or gt to select On or Off PREFERENCES HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration Back When Panel Lock is On a reminder will appear when the buttons on the
19. IA and press 2 E Matve y Foder ooooos 00 0228 KI M 16 0001 0003 lt Nawm ent et se 001 avi Pause E Move E Select Back Press lt or gt to DO Play or pause the selected video 2 Press lt or gt to select Movie and press g to enter the submenu e b Fast back the selected video E Fast forward the selected video El Go to the previous video El Go to the next video D Stop play E Select the desired repeat interval Repeat Off Repeat One Repeat the selected 3 Press A or Y to select the folder you NEO ONES wish to view and press to enter 3 T video Press P Aor P Y to page up or down B Repeat from A to B Set A A Set iss Repeat and Start TE Set B B Set R oa Repeat and repeat from Ato B E show play list e I video information CORDE Eg EE E E amp Siow forward the selected video Press A or V to select the desired video O Step forward the selected video and press Ge to play E Aspect Ratio E Picture Mode Allows you to input a search time and press to confirm the setting 47 Engish Repeat Settings Press MENU to change the settings when viewing a video Press lt or gt to select Md and press to select Off One or Folder Set Press MENU to change the settings when viewing a video Press lt or gt to select Id and press to select Set A Set B or None Using the Play List Press
20. MENU to change the settings when viewing a video Press A or to select a video and press to play the video Press RETURN on the remote to col lapse the list gt 002 avi 003 avi 4B Standard vow SS 00 00 16 00 02 28 FC a 1c 00001 0003 8 op AEO gt 001 avi Play List CEJ E Move 0K Select Back Slow Forward The feature changes forward speeds Press MENU to change the settings when viewing a video Press lt or gt to select EJ and press to select SF2X SF4X SF8X SF16X or Play Press lt or gt to select El and press 48 Step Forward The feature allows you to view a video one frame at a time Press MENU to change the settings when viewing a video Press lt or gt to select EJ and press X to play step by step Video Info Info display file status information content number video title audio track subtitle pro gram size etc 2 Press lt or gt to select E and press Press MENU to change the settings when viewing a video 001 avi Resolution 720x576 Audiotrak eC IT o Subtite 10 Program 10 Size 9172 KBytes Audio Type MPG ee 00001 0003 001 avi 53 OR PH Ee gt OK Select RETURN Back The information will be removed by time out about 15 sec or press 8 to exit Aspect Ratio Press MENU to change the settings when viewing a video Press lt or gt to select Kad and press to select Native 4
21. Mode Back Press A or to select Digital Subtitle Language Digital Subtitle Language 2nd Audio Language and Audio Lan guage 2nd then press lt or gt to select your preferred language 22 To set up the television use the buttons on the remote control as detailed on page 9 O Press to select Tuner Mode Tuner Mode Antenna fa Select Press lt or gt to select Antenna or Cable Location Back NOTE This function is only available in certain regions Press to select Location Press lt or gt to select Home or Store For normal home use select Home Location B To use the TV for the display in a store showroom please select Store Home mode is recommended for normal use Home Select When Store is selected the confirma tion window appears Auto tuning Back Location B You have selected Store This mode consumes more energy Are you sure you want to set to this mode NO Select Press lt or gt to select YES or NO Auto tuning Back Press 8 to enter the Auto tuning menu NOTE Please make sure the aerial is connected to the TV before tuning Auto tuning Tuning Mode Start Scan OK EER Back Press A or to select Tuning Mode and then press lt or gt to select ATV DTV or ATV and DTV Press A or to select Start Scan and press X Auto tuning DTV Progress 6 il Channel Stop The search will begin for a
22. Press lt or gt to select Kl and press to turn On or Off NOTE If Repeat is On slide show starts pho to viewing from the first photo in the folder after reaching the final photo Set Interval Time Press MENU to change the settings when viewing a photo Press lt or gt to select ke and press to select the desired interval time 3 5 10 15 30 60 90 Sec Using the Play List Press MENU to change the settings when viewing a photo Press lt or to select El and press Press A or Y to select a photo and press X to show the photo Press RETURN on the remote to col lapse the list ry 0000 1 jpg gt 0000 3jpg 0000 4jpg a OC Phy List Page gt Move 0 Select RETURN Back Background Music Set the background music when viewing photo Repeat Settings for Slideshow oO Press MENU to change the settings when viewing a photo 2 Press lt or gt to select E and press 6 to turn On or Off 42 Press MENU to change the settings when viewing a photo 2 Press lt or gt to select El and press x Press lt or gt to select El and press Photo Info Info displays the file status information con tent number photo title shooting date and time resolution etc GB Press MENU to change the settings when viewing a photo 2 Press lt or gt to select E and press W Press A or V to select music and press s to play music v a M Press
23. Settings Voice Enhancement Bass Boost SJ Edit Back Engish Bass Boost Bass Boost enhances depth of the sound Press MENU Press lt or gt to select SOUND and press X to enter the submenu o Press A or Y to select Advanced Sound Settings and press 68 to enter the submenu B Press A or to select Bass Boost and press lt or gt to change the setting Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5 1ch toa DTV 2ch an ATV channel or an external input Using the Audio Level Offset feature reduces these volume differences 1 Press MENU Press lt or gt to select SOUND and press to enter the submenu o Press A or V to select Audio Level Off set and press to enter the submenu B Press A or V to select an option and press lt or gt to adjust the volume level Audio Level Offset DTV 2ch 4 ATV External Input EEN Back NOTE e The available item changes depending on the current input source For example while watching a DTV 2ch programme only DTV 2ch is available and the other two items are grayed out in the menu This allows you to eas ily adjust according to each condition e When watching a DTV 5 1ch programme this feature is not available Digital Audio Output Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or to select Digital Audio Output and press 6X to ente
24. Subtitle Language or Audio Language allow a programme or film to be viewed with a choice of soundtrack language provided they are cur rently being broadcast 1 In the DTV Settings menu press A or V to select Subtitle And Audio and press to enter the submenu Press A or to select Subtitle Display and press lt or gt to select On or Off Press A or V to select Subtitle Type or Audio Type and press lt or gt to select Normal or Hearing Impaired Press A or to select Digital Subtitle Language Digital Subtitle Language 2nd Audio Language or Audio Lan guage 2nd and press lt or P to select your preferred language Change the 4 digit parental control password 29 Password The factory default password is 0000 1 In the DTV Settings menu press A or Y to select Password and press to enter the submenu DTV Settings Channels Subtitle and Audio Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Common Interface Enter Back o Enter a new 4 digit password and re enter the new password again to confirm Password New Password Baa Confirm Password ammm Input Back NOTE 0000 cannot be used Parental This function blocks channels or programmes that you do not want to or that you do not want your children to watch A password is required to access this function The factory default password is 0000
25. TOSHIBA Leading Innovation gt gt gt Owner s Manual 32W23 32 39 50L23 DIGITAL Series This standard owner s manual is designed to show you how to connect and tune in your Toshiba TV and to operate the most commonly used functions During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance If your TV is connected to the internet firmware will be automatically made available If your TV is not connected to the internet you can download the latest version of firmware from www toshiba om net firmware php If you want to view advanced functions for your TV you can do so by visiting www toshiba om net SUPPORT N PLEASE VISIT WWW TOSHIBA CO UK TV DVD SUPPORT OR CONTACT THE TOSHIBA CUSTOMER N HELPLINE ON 0871 495 0730 Register your TV online at www toshiba co uk registration Toshiba estimates that the initiative of making the advanced functions available online will save over 100 000 trees per year 6 5 Million Kg CO If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your local owner s manual Helpline number Contact details are shown at the back of this book Engish Contents Safety Precautions sssssesseesrenennrennrns 4 Pa rental eara a ra ea 29 g g Standby Update Control ar80 Installation and important Standby Channel Update e 0 INTONMATION s
26. Video Input PAL SECAM NTSC 3 58 4 43 External connections EXT1 Input Output 21 pin SCART EXT2 EXT3 Input RCA jacks RCA jacks RGB PC Input D sub HDMI 1 2 Input HDMI Audio EXT2 EXT3 RCA jacks Digital Audio Output S PDIF USB Port Interface version USB 2 0 USB Class USB Flash Drive File system FAT32 Stereo A2 Nicam 2 Carrier System Energy efficiency Class 32W23 32L23 39L23 50L23 Visible Screen Size 32W23 approx 32L23 39L23 50L23 On mode power consumption 32W23 approx 32L23 39L23 50L23 UHF UK21 UK69 UHF E21 E69 VHF E2 E12 S1 841 UHF F21 F69 VHF F1 F10 B Q UHF R21 R69 VHF R1 R12 Auto Mixed RGB Composite S Video TV Out EXIT2 Video EXIT3 Y P C P C RGB Audio L R shared Coaxial A Class A Class A Class A Class 80cm 80cm 98cm 126cm 31 0W 31 0W 44 6W 70 8W Tested in accordance with IEC 62087 BD in default settings 65 Annual power consumption approx 32W23 32L23 39L23 50L23 45 3KWhly 45 3KWhly 65 1KWh y 103 4KWh y Energy consumption XYZ kWh per year based on the power consumption of the television operating 4 hours per day for 365 days The actual energy consumption will depend on how the television is used Standby power consumption approx Screen Resolution pixels Display Sound Output At 10 Distortion Power consumption approx Weight TV with stand approx Gross
27. WV to select Reset TV and press 69 Press lt or gt to select YES to confirm or select NO to exit and press Reset TV B Previous settings will be lost Press EXIT for no change NO Enter Back Select Engish DTV Settings Channels The channel order may be changed to suit your personal preference NOTE This function is only available in DTV mode oO Press MENU Press lt or gt to select SETUP and press to enter the submenu 0 PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or to select DTV Settings and press to enter the submenu 3 Press A or YW to select Channels and press DTV Settings Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Common Interface Enter Back Channels TRK 5 kamal Bibigon Service Information Radio Three C Re number Favorite H Skip O Lock Sort Re number O Press the mm button on the remote to renumber the highlighted channel BO Edit the channel number using the num ber keys on the remote and press Channels ta 8 ABC Jaz 2 ABCI ABC ABC2 ABC3 ABCA Input Enter Back Favorite Press the mE button on the remote A icon appears Channels Rossia 1 4 NIV TRK 5 kamal Bibigon Service Information Radio Three CO Re number E Favorite M Skip Sort Press to show th
28. ally switched On if user pressed Play key on the HDMI CEC device In the HDMI CEC Control menu press A or Y to select Auto Power On E Press lt or gt to select On or Off Auto Standby When the Auto Standby is enabled switching off the television will automatically switch off all connected HDMI CEC equipment 1 In the HDMI CEC Control menu press A or Y to select Auto Standby E Press lt or gt to select On or Off Amplifier Control When Amplifier Control is set to On it allows the Speaker Preference feature to become available 1 In the HDMI CEC Control menu press A or Y to select Amplifier Control E Press lt or gt to select On or Off Speaker Preference This feature allows the audio output prefer ence to be set to the TV speakers or Ampli fier speakers The Amplifier option lets the television s remote control adjust or mute the volume of the audio 1 In the HDMI CEC Control menu press A or Y to select Speaker Preference when Amplifier Control is On 2 Press lt or gt to select TV Speakers or Amplifier NOTE This function is only available when the TV is connected to audio receivers that support CEC function 52 HDMI CEC Playback Device Control This is a new feature that uses CEC technology and allows you to control HDMI CEC compatible devices from the TV remote control via HDMI connection When there are two or more HDMI CEC devices connected to the television t
29. an Ea EER Back Press A or to select Start Scan and press to start Auto Tuning Auto tuning Progress ATV 6 E DTV 0 Channel Station to exit ATV scan Tuner Mode Cable Switching between tuner modes will change the features available on your television All the current channels and settings for ex ample the locked channels will be lost In the SETUP menu press A or to select Tuner Mode and press Press lt or gt to select YES or NO Tuner Mode B This may change the features available on your TV Continue Select Enter Back Press MENU Press lt or gt to select SETUP and press to enter the submenu Press A or to select Auto tuning and press to enter the submenu Language English Country Germany Tuner Mode Cable Auto tuning ATV Manual Tuning DTV Manual Tuning DIV ys AV connection Picture Position Quick Setup Enter Back Press A or to select Tuning Mode and press lt or gt to select ATV DTV or ATV and DTV Auto tuning B Previous settings will be lost Press EXIT for no change Tuning Mode 4 ATV and DTV gt Start Scan OK Operator Selection Scan Type Start Frequency MHz End Frequency Modulation Symbol Rate Network ID System Quick Scan Auto Back Press A or V to select Operator Selec tion and press lt or gt to select Others Ziggo or UPC NOTE Operator Selection can only be adjusted wh
30. ay the breakdown menu Press lt or gt to select an item then press A or to select the item as shown below ATV Manual Tuning C DEF G Position The number to be pressed on the remote control System Specific to certain areas Colour system Factory set to Auto should only be changed if problems are experienced i e NTSC input from external source Skip s means nothing has been stored or the facility to skip the channel is On Signal Class The channel classification Channel The channel number on which a station is being broadcast Searching Search up and down for a signal Manual fine tuning Turn on to execute fine tune function Turn off to execute manual fine tune function Station Station identification Use the A or Y and lt or gt buttons to enter up to seven characters O Press to save 26 DTV mode Antenna Press MENU Press lt or gt to select SETUP and press to enter the submenu Press A or to select DTV Manual Tuning and press to enter the sub menu Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Antenna Enter Back Press A or Y to select RF Channel and press lt or gt to select or use number key pad on the remote to enter a channel DTV Manual Tuning Weak Average Signal Strength a Quality Poor Tuner Mode RF Channel Frequency Sta
31. ccess items are different depending on the current mode Subtitles If Subtitles are available for your current pro gramme pressing the SUBTITLE bution will toggle Subtitles on or off Picture Still This feature is used to hold a still image on the screen Press to hold an image on the screen press again to cancel Input Selection Use the Input Selection feature if the televi sion does not switch over automatically when using an external device Pressing a list will appear on screen show ing all external equipment Use A or Y to highlight and to select HDMI displays equipment connected to Input HDMI on the back of the television It is de signed for best performance with 1080i 1080p high definition signals Sound Controls Volume Controls and Mute Sound Volume Press Sor 4 to adjust the volume Sound Mute Press RK on the remote once to turn the sound off and again to cancel Dual If a programme or film is being broadcast with a soundtrack in more than one language the DUAL feature allows selection between them Press MENU Press lt or gt to select SOUND and press to enter the submenu a o PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or V to select Dual and press lt or gt to choose between Dual or Dual2 Dual Bass Treble Balance Stable Sound Dynamic Range Contrc Advanced Sound Settings Audio Level Offset Digital Audio O
32. damage When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV e Two people are required for installation e To install a wall mount from another manufacturer 1 Unplug and remove any cables and or other connections from the rear of the TV 2 Carefully lay the front of the unit face down on a flat cushioned surface such as a quilt or blanket 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appro priate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket 4 Always use the screws supplied or recommended by the wall mount manufacturer Removing the Pedestal Stand 1 Carefully lay the front of the unit face down on a flat cushioned surface with the stand hanging over the edge 2 Remove the screws 3 After the screws are removed hold the pedestal stand in place then remove it from the TV by sliding away from the bottom of the TV NOTE Extreme care should always be used when removing the pedestal stand to avoid dam age to the LCD panel 32W23 32 39L23 x 2 50L23 x 4 Engish Toshiba do scribed bel When using MHL Mobile High definition Link Interoperability with MHL devices of other manufacturers is not guaranteed es not provide any guarantee therefore against operational failure such as that de ow when an MHL source is conn
33. de Press MENU Press lt or gt to select SETUP and press to enter the submenu PICTURE APPLICATIONS PREFERENCES non SETUP Press A or V to select Software Upgrade and press 6 to enter the submenu Press A or V to select Auto Upgrade and press lt or gt to select On or Off Software Upgrade Auto Install Manual OAD USB Detection USB Upgrade Insert a USB storage device Press A or_ to select USB Upgrade and press to start upgrading the firmware USB Upgrade NOTE Firmware upgrading is suggested to be done by the professional service personnel Engish Text Services and Text Information This television has a multi page text memory which takes a few moments to load Setting the Modes In the PREFERENCES menu press A or Y to select Teletext PREFERENCES HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistratior Back Press lt or gt to select Auto or LIST Navigating Pages using Auto If Fastext is available four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Navigating Pages using LIST If Fastext
34. e Expect PC Wide PC only Super Live Cinema Subtitle 14 9 Use this setting when watching a widescreen DVD widescreen video tap e or a 16 9 broadcast when available Du to the range of widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen This setting will show the picture witho ut over scan and side panel when watching a PC signal source via HDMI or PC terminal Use this setting to view a true4 3 broadcast This setting will enlarge a 4 3 image to fit the screen by stretching the image horizontally and vertically holding better proportions at the centre of the image Some distortion may occur When watching letterbox format films video tapes this setting will eliminate or reduce the black bars at the top and bottor of the screen by zooming in and selecting the image without distortion When subtitles are included on a letterbox format broadcast this setting will raise the picture to ensure that all the text is displayed Subtitle Use this setting when watching a14 9 broadcast The setting will show the picture without over scan i e WYSIWYG This option is available when watching video signal source via HDMI or watching DTV HD signal 36 This setting will show the picture without over scan i e WYSIWYG gt Normal This option is only available wh
35. e Channel List and press lt or gt to Favorite The desired channel is displayed on the list Channel List 4 Favorite EGR 804 Rossia 24 Low 806 TRK 5 kamal Skip Press the button on the remote A gt icon appears Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three C Re number Favorite E Skip O Lock Sort Lock Press the mm button on the remote A Xi icon appears Channels A NIV TRK 5 kamal Bibigon Service Information Radio Three C Re number Favorite H Skip Sort Sort Press A or to select the desired channel and then press A tick icon appears Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three E store RETURN Back Press A or YW to select the channel you wish to swap with the one selected in Step 8 and then press Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three OL PX Store RETURN Back The name of the two channels are swapped Channels 804 Rossia 1 805 NTV 806 TRK 5 kamal CU 273 Service Information Radio Three 274 CNN CO B EIT text C Re number Favorite E Skip Subtitle and Audio You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired If the Hearing Impaired is selected it provides subti tle services to deaf and hard of hearing viewers with additional descriptions
36. e Position and press to enter the submenu English Germany Antenna OK Language Country Tuner Mode Auto tuning Picture Position Quick Setup Enter Back Press A or to select an option you want to adjust and press lt or gt to adjust the settings as required Picture Position Horizontal position Vertical position Reset Back 38 Picture Mode You can adjust the picture appearance by se lecting the preset value in picture mode based on the programme category 1 Press MENU Press lt or gt to select PICTURE and press to enter the submenu PICTURE a SETUP SOUND 0 APPLICATIONS PREFERENCES Press A or Y to select Picture Settings and press to enter the submenu Press A or to select Picture Mode and press lt or gt to select Dynamic Standard Mild Movie Game or User NOTE Game is not available for the TV input mode Picture Settings Standard High On 70 Picture Mode Active Backlight Control Auto Brightness Sensor Back Light Contrast 95 Brightness 50 Colour 50 Tint 0 Sharpness 50 Black White Level Middle Cinema Mode On Colour Temperature Medium Static Gamma 0 Reset Back Picture Preferences You can customise current picture mode set tings while selecting User In the Picture Settings menu press A or Y to select Back Light Contrast Brightness Colour Tint Sharpness Press lt or gt to suit your preference
37. e makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturers approved stand bracket or legs with the fixings provided according to the instructions DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DO NOT continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from ear phones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially chil dren push or hit the screen push anything into holes slots or any other openings in the case These actions will damage screen or internal parts NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry Installation and important information Where to install Locate the television away from direct sunlight and Screw strong lights soft indirect lighting is recommended euppll for comfortable viewing Use curtains or blinds to A prevent direct sunlight falling on the screen i Place the TV set on a stable level surface that can sup
38. ear giving details of the channel and programme currently being viewed m 3 BBC Parlament sil 10 18 Sun 17 10 2012 E Westminster Ha 07 00 11 30 Next Ministers Que 0 oo ws B P gd AD T2 Minutes Left Recorded coverage of questions in the House of Commons to Prime Minister Gordon Brown from Wednesday 26 November H Change EEUE Exit Press A or V to choose from Now or Next information guide On Screen Information Icons Icons will appear on the Information screen giving details about the programmes being broadcast Details of these icons are listed below Description Service type TV Radio TEXT Skip Service info Mono Stereo Dual mono Multichannel Dolby Digital Dolby Digital Subtitle info Hearing Impaired Video format HD SD Video Aspect Teletext Subtitle Single Multi Multi audio track Event info Audio Description Parental rating Encrypted 31 Guide Select the on screen guide by pressing GUIDE The guide screen will appear highlighting details of the channel and programme currently being viewed This may take a few moments to appear Press lt or gt for information on other programmes scheduled for the channel selected For details of other programmes cur rently available press A and to scroll up and down the channel list NOTE In order for the recording operation to work properly the med
39. ected to the TV No picture or sound Some of the functions do not work be remote operation from the TV If the MHL on its use connected does not work properly also contact the manufacturer of the source device for advice Do not disconnect the power plug when the TV is active and the MHL device is being connected Do not disconnect the power plug when the TV is in standby mode and the MHL device is being Please take note EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by fire earthquake accidental damage intention use of th al misuse of the product e product in improper conditions loss and or damage caused to the product while in the possession of a third party any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual any loss simultan or damage caused directly as a result of misuse or malfunction of the product when used eously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP m
40. ed by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more informa tion and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration MHL the MHL logo and Mobile High Definition Link are trademarks or registered trademarks of MHL licensing LLC Engish Cleaning the screen and cabinet Turn off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following information is only for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after E Augu
41. en Country is Netherlands Press A or YW to select Scan Type and press lt or gt to select Full Scan or Quick Scan NOTE Channels with a weak signal may be missed by Quick Scan Press A or V to select Operator Selec tion Scan Type Start Frequency MHz End Frequency Modulation Symbol Rate Network ID or System and use number key pad on the remote to define the information or select Auto for tuning Press A or Y to select Start Scan and press to start tuning NOTE e The information should be given by your cable provider e Network ID is only available for Quick Scan 25 There are two TV modes ATV and DTV that can be tuned in manually using Manual Tun ing Manual Tuning ATV mode Antenna Cable Press MENU Press lt or gt to select SETUP and press x to enter the submenu Press A or V to select ATV Manual Tuning and press to enter the sub menu Language Country Tuner Mode English Germany Antenna Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Enter Back Press A or to select the programme position you want to arrange and then press P ATV Manual Tuning Enter Back Press A or V to move through the list to your preferred position As you do so the other stations will move to make room Press lt to store programme position ATV Manual Tuning Back Engish O Press to displ
42. en watching __ a PC signal source via HDMI y or PC terminal i Dot by Dot is a non scaling display Depending on the input signal format l Dot by Dot the setting will display the picture with side panels and or bars at the top and bottom i e VGA input source Press QUICK to display the Quick access z menu Use A or Y to select the Picture Size Quick access and press lt or gt to select the option Picture Size Picture Mode Sleep Timer Media Player System information HDMI CEC Control MHL Control You can choose the picture size from Wide 4 3 Super Live Cinema Subtitle 14 9 Native Normal or Dot by Dot Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws Available Picture Size and Position Control Cinema Subtitle Native Normal 37 Engish Picture Controls Most of the picture controls and functions are available in both digital and analogue modes NOTE Features not available will be greyed out Picture Position The Picture Position may now be adjusted to suit personal preference Press MENU Press lt or P to select SETUP and press to enter the sub menu SETUP 0 APPLICATIONS PREFERENCES PICTURE SOUND Press A or to select Pictur
43. enu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous it is always advisable to reduce both the brightness and contrast settings e Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the im age at the 4 3 outlines this is not a defect of the LCD TV and is not covered under the manufactur ers warranty Regular use of other size modes e g Super Live will prevent permanent retention NOTE Interactive video games that involve shooting a gun type of joystick at an on screen target may not work with this TV SYMBOL SYMBOL DEFINITION INSTRUCTIONS The exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance servicing instruction in the literature accompanying the appliance A WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times Get started with Freeview Freeview gives you over 50 TV channels to play with not to mention 25 radio stations Start watching all your favourite
44. es in the selected folder E show play list Music information and press x to confirm the setting 44 Repeat Settings Press lt or gt to select BM Press to select Off One or Folder Using the Play List Press lt or gt to select El and press x Press A or V to select music and press to play music Press EXIT on the remote to collapse the list 002 mp3 003 mp3 A NN 00 00 02 00 02 42 C E 16 00001 0003 SALLES E i a a mps Piay List CEJ ELIO Dk Select RETURN Back Music Info Info display file status information content number music title Bit Rate Artist Sampling Year and size Press lt or gt to select E and press 001 MP3 Album Music Tite o Bit Rate 320K Artist Singer Sampling 44K Year 2010 Size 6366 KBytes Foder NS 00 00 02 00 02 y 16 00001 0008 lt 0 gt 001 MP3 info Back o The information will be removed by time out about 15 sec or press to exit 45 Engish Enjoy Videos through USB Port The Video Viewer allows you to playback video files from a USB storage device NOTE USB 2 0 or above is recommended for best media performance File Extension Container Video Codec SPEC Bit Rate Mbit sec Profile dat mpg mpeg MPEG MPEG1 MPEG2 1080P 30fps 40 MPEG2 Main Profile High Level ts trp tp MPEG2 TS H 264 TS H 264 MPEG2 H 264 1080P 50fps Others 1080P
45. forming you that the programme is about to start When the TV is in standby mode and the timer activates the TV will wake up with backlight off speaker mute on and change to the channel selected You must set the time correctly before using this function All set timers are cleared when performing a new channel scan Press GUIDE on the remote to display the Programme Guide 4 Rossia K m 08 54 17 Fri 27 Aug Programme Guide 27 Aug Unclassified iG 4 Rossiak 9 Deejay Chiama Italia 20 00 21 00 Deejay Hits 24 00 22 00 The Club Deejay Tg Deejay News Beat Deejay News Beat Deejay News Beat 5 NV 6 Rossia 2 m7 TRK 5 Kanal Bibigon Service Information Service Information sts 22 00 22 30 22 30 23 00 23 00 23 30 J 23 30 00 00 E Genre E More Info TimerList OK Tune RETURN Back Press A or to select the desired channel and press to enter the pro gramme schedule Press A or to select the desired programme and press 8 to enter the Tune menu Programme Guide 27 Aug 4 Rossia K 08 54 17 Fri 27 Aug Programme Timers 4 Rossia K Deejay Chiama Itali 20 00 21 00 17 Oct 2005 Repeat P7 Subtitle Save RETURN Back Press A or V to select Repeat or Subtitle and press lt or gt to adjust the settings as required Press to save the settings Press the mE button on the remote to enter the Timer List menu Programme Timers 07 42 58 Fri 27 Aug
46. gs Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Common Interface Back When Channel Grouping is On the channel change by P A and P will be within a single service group press ATV DTV on the remote control can be still used for change services among ATV DTV Video DTV Radio and DTV Text 30 Common Interface The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For information see a service provider Insert the CAM and card into the Com mon Interface Slot following the instruc tions provided with the CAM A box will appear on the screen to confirm that the CAM has been inserted In the DTV Settings menu press A or Y to select Common Interface and press x to enter the submenu Details of the CAM should now be avail 3 able NOTE The software updating of CI Plus CAM may be automatically executed At this time any Recording Reminder pro gramme timer will be cancelled Digital On Screen Information and Programme Guide When viewing in digital mode the on screen information and programme guide provide access to programme details for all available channels Information Press and the information screen will app
47. h the menu and use to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout this manual Using the Controls on the TV Press 4 to adjust volume Press to change programme selection then press 4 to adjust programme selection Press and hold until Source List is displayed then press to scroll through the list until desired input source is located Please always refer to the owner s manual of the equipment to be connected for full details NOTE Inserting the headphone plug will mute the sound from all speakers 21 Engish Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are con nected First Time Using For first time use plug in the television and press the button The Language menu will appear Language English Nederlands Norsk sloven ina Cesky 6bnrapckn Hrvatski Gaeilge Sensa foa E Suomi fow EESSI Enter NOTE This function is accessed in the SETUP gt Quick Setup menu Press A V lt or gt to select your language Press to enter Quick Setup menu Press A or to select Country and then press lt or gt to select your country Quick Setup UK English English English English Country Digital Subtitle Language Digital Subtitle Language 2nd Audio Language Audio Language 2nd 5 Select Tuner
48. hannel and press to access Engish Q Foro gt OGO Why are the colours wrong when an NTSC source is played Connect the NTSC source via a SCART cable and play Select Manual setting from the SETUP menu and set the Col our System to Auto Manual setting Colour system Auto E Select Bl Change Save Back What can be done if the user defined password has been forgotten Use the universal password 1276 then change to a new number of your choice Why don t the devices connected via HDMI operate properly Make sure to use cables with the HDMI logo H M Some early HDMI equipment may not work properly with the latest HDMI TV products due to adoption of new standards Why is the Media Player DVD picture in black and white Check the correct input has been cho sen S VIDEO or AV Why did TV turn off by itself After roughly 15 minutes without any input video signal at TV mode the TV will turn off to reduce power 64 Specifications and Accessories e This television complies with the specification listed below DVB T Broadcast systems channels Broadcast systems channels UK UHF 21 68 PAL I France VHF 05 10 PAL B G VHF 01 05 UHF 21 69 Germany VHF 05 12 SECAM L UHF 21 69 Austria VHF 05 12 SECAM D K UHF 21 69 Switzerland VHF 05 12 UHF 21 69 Italian VHF 05 12 D E F G H H1 H2 UHF 21 69 Spain UHF 21 69 Nederlands VHF 05 12 UHF 21 69 Greece VHF 05 12 UHF 21 69
49. he device selection menu appears Highlight the desired device and then press to select Remote Control Pass Through Control Panel ROOT CONTENTS e Press A or Y to select HDMI CEC Control in the Quick access menu and then press The Pass Through Control Panel appears e Some functions are only available when the Pass Through Control Panel is displayed on the screen Please refer to the following procedure Please refer to the Remote Control image and the following table for the key definitions of the Pass Through Control Panel e MENU and RETURN functions are unavailable when the Pass Through Control Panel is on No Item Description When opening the Pass Through Control Panel GUIDE Turn off the desired HDMI CEC device Close the Pass Through Control Panel Pause Stop Rewind Forward Play Skip Reverse Skip Forward ROOT Root key DVD DVD key CONTENTS Contents key TOP Top key In contents menu A V lt 4 gt Navigate contents menu 3 CR Enter contents menu etc NOTE These functions depend on the devices connected 53 Engish Using MHL TV function You can use the following functions by con necting between the TV HDMI 2 port and micro USB port of mobile phones etc with a MHL cable e Charge with mobile phone from TV e Video Audio output from mobile phone e Access mobile content through TV remote controlle
50. his manual Warning batteries must not be exposed to excessive heat such as sunlight or fire The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing Engish Connecting External Equipment Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Fn MM a decoder could be Digital Satellite or any other compatible decoder Model will determine power cord position AVOND POWER CORD gt ir media recorder S HDMI 1 INPUT decoder SOCKET H MEDIA RES a AIGA Y SCART 1 INPUTITV OUT 2 m a INOUT SAT A a decoder could For 32W23 32 39L23 o o D lt USB SOCKET be Digital Satellite or any other compatible decoder lt TOSHIBA Model will determine power cord position y 00 gg gy i POWER CORD gt zl Cz LA s 7 RGB PC t y 7 HOM toy RGB PC media recorder HDMI 1 INPUT decoder SOCKET Bi INPUT TV OUT Pan c ama NOUT SAT gt eniu e For 50L23 10 Aerial cables
51. hrough HDMI Dynamic Range Control 33 LONMINAlS escccccsssereicsseersestscrsteestersemexciorrengans 19 Voice Enhancement 33 Acceptable PC signals through HDMI Bass BoOst cecniu 84 terminals E E A 19 Audio Level Offset 34 Using the Controls sssssseseesees 20 Digital Audio Output 84 Switching ON 21 Audio DeSCription teeta andi tie 35 Using the Remote Control ccccccecee 21 Widescreen VieWiNG ccsseeeeeeee 36 Using the Controls on the TV 21 Available Picture Size and Position Tuning the Television 22 COMO sexs assesses e ea e e etait 37 First Time USIN o9 Picture COntrols ssscsssessseesees 38 Setting the Channels ceccseseeees 24 Picture Position s str 38 Pi M dra 38 AUTO MUMING Asani eaaa aa 24 is ode s Picture Preferences cccccsseceeesseeeereeee 38 Manual Tuning 25 Black White Level ccc ccccsseceessseeeeeseeee 39 Automatic Power Down 227 Reset TV 27 Cinema Mode cccccccccssseecessteeeeesseeeeees 39 ae Set Hedeete Veueee sy 6 aes Colour Temperature cccccceceessseeeseeseees 39 DTV Settings occiesiecscccescsssettcseretecassivccans 28 Static GAMMA seecesecesceccecccsececcccceseeccecescccseces 39 eE E AAE E E A 28 ROSORAsarniratasrverncnendiientancces 39 Subtitle andi Audio ives vesss feciicaseieavencicts 29 Active Backlight Control 39 PASS WONG vc ase ceeecrescisss OE NAS 29 Auto Brightness Sensor cc ceeeeeeeees
52. i cssidsscevsscvassacseccessvessstateceaaest 5 Channel Grouping 30 Where to install sisisi 5 Common Interface zs 90 When using a Wall Bracket 0ccc0 5 Digital On Screen Information and When using MHL Mobile High definition Programme Guide sssseeeseeeees 31 a EE OES E E ere 6 ae 5i eldan enio aa E E AE Get started with Freeview 000 7 Onscreen information icons ccc 31 Keep UP tO date cc cscceceeceacsecsessnetiecseess 7 UGS rs ena cance so ayis tan desdevssauceaeacesstatsx sevens 31 The Remote Control sssseeceeeeesees 9 General Controls ccssseceeeeessseseeeee 32 Inserting batteries and effective range of the Selecting Channels cssesseeseeeeeeee 32 FOMOLC e T 9 Stereo and Bilingual Connecting External Equipment MIERE 10 TraAnNsSMISSIONS nnana eenas 32 Quick Access Menu cceeeeeeteeteeees 32 HDMI CEC Connections 12 Subtitles aa tence retrace nde insnem ecco 32 Connecting an HDMI or DVI device to nee pan E PEE A TET the HDMI input scssssessssssessecseeseene 13 APUSE eters EE ae ence Sound Controls 33 To connect an HDMI device 0 13 To connect a DVI device esceseeeeeeeeeee 15 Volume Controls and Mute Sound 33 DUAN iseis eRe 83 Connecting a Compute ss ccee 17 g P Bass Treble and Balance 2500 To connect a PC to the HDMI terminal 17 Stable Sound ooo 33 Acceptable Video signals t
53. ia recorder must be set to the same time as the TV Regarding the process for recording please refer to the owner s manual of the recording equipment Engish General Controls The General Functions allow you to select channels and information adjust sound features personal ise the picture style and select any connected external equipment Selecting Channels To select a channel use the numbered buttons on the remote control Channels can also be selected using P N and P v Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will ap pear on the screen each time channels are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press OVI to select Stereo or Mono Bilingual If a bilingual programme is offered the word Dual will display on screen To change between languages press OTI to switch between Dual 1 and Dual 2 Quick Access Menu Quick access helps you access some options quickly such as Picture Size Picture Mode Sleep Timer Media Player System Informa tion HDMI CEC Control Speakers and MHL Control Press the QUICK button to display the Quick access menu and use A or Y to select the option you would like to change Quick access Picture Size Wide Picture Mode Standard Sleep Timer 00 00 Media Player System information HDMI CEC Control TV Speakers NOTE Quick a
54. ilable via SCART analog video and audio output DTV Programme SCART Analog Output Scrambled with CGMS A 00 Copy Freely Output via SCART Scrambled with CGMS A 01 Copy No More Not output via SCART Scrambled with CGMS A 10 Copy Once Not output via SCART Scrambled with CGMS A 11 Copy Never Not output via SCART Non scrambled Output via SCART CGMS A Copy Generation Management System Analog is a copy protection mechanism for analog television signals 11 Engish HDMI CEC Connections The basic functions of connected audio video equipment can be controlled using the television s remote control if an HDMI CEC compatible device is connected sommig I o Dra oe TOSHIBA For 32W23 32 39L23 ns ri A ee Ve Z TOBA a l MN yy L v4 ts en i geet hf y r For 50L23 12 Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device This input is designed to accept HDCP High Bandwidth Digital Content Protection programme mate rial in digital form from EIA CEA 861 D compliant 1 consumer electronic devices Such as a set top box or DVD player with HDMI or DVI output For acceptab
55. ion e The default settings and adjustment ranges may vary depending on the input signal format Input Signal Selection Use the Input Selection feature if the television does not switch over automatically when using an external device Engish Input Signal Selection You can select source of AV or S VIDEO from this function 1 Press MENU Press lt or gt to select SETUP and press to enter the submenu m 9 PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or_ to select AV connection and press to enter the submenu 3 Press A or V to select EXT1 input and press lt or gt to select AV or S VIDEO AV connection EXT1 input 4 Back 62 Frequently Asked Questions Why is there no sound or picture Check that the television is on and that all connections are made properly There is a picture but why is there little or no colour The colour is factory set to Auto to auto matically display the best colour system When using an external source if there is little or no colour improvements may sometimes be achieved gt OES To manually change the colour system With the external source playing select Manual setting in the SETUP menu Using A or to choose from Auto NTSC 4 43 NTSC 3 58 SECAM or PAL Manual setting Colour system Auto BE Select fl Change Back Why doesn t the video DVD being played show on screen Save Make sure the Media
56. is available four coloured titles with numbers 100 200 300 and 400 have been programmed into the television s memory To view these pages press the relevant col oured buttons To change these stored pages press the rel evant coloured button and enter a new 3 digit number This number will change in the top left of the screen and in the coloured highlight Press to store The bars at the bottom of the screen will flash white Whenever w is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost If 8 is not pressed the selection will be forgot ten when text is cancelled Other pages may be viewed by entering the 3 digit page number but DO NOT press or these pages will be stored Control Buttons Below is a guide to the functions of the remote 60 control text buttons Displays the index initial page Press Ei to access the index initial page The page displayed is dependant on the broad caster Reveals concealed text To discover the solutions on quiz and joke pages press the button Holds a wanted page At times it is convenient to hold a page of text Press amp and amp will appear in the top left of the screen The page will be held on screen until the button is pressed again Enlarges the text display size Press once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert
57. le video signal formats see page 19 NOTE e Some early HDMI equipment may not work properly with your latest HDMI TV due to the adoption of a new standard e Supported Audio format Linear PCM and Dolby Digital sampling rate 32 44 1 48kHz To connect an HDMI device Connect an HDMI cable type A connector from the device to the HDMI terminal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo HDMP e If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this mode e HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration N TN o TOSHIBA o MUONO ONMO o lt HDMI cable not supplied For 32W23 32 39L23 13 Engish z a z 5 A Mn TOMBA a Ft yyy gy ae i HDMI device HDMI cable s not supplied For 50L23 To view the HDMI device video press the button to select HDMI 1 or HDMI 2 mode 14 To connect a DVI device Connect an HDMI to DVI adapter cable HDMI type A connector to the HDMI 1 The maximum recommended HDMT DVI cable length is 6 6ft 2m e An HDMI to DVI adapter cable transfers video only e Separate analogue audio con
58. ll available stations The slide bar will move along the line as the search progresses You must allow the television to complete the search When the search is complete the television will automatically select channel 1 This may not be a clear picture or the signal may be weak so the station order can be changed using ATV DTV Manual Tuning in the SETUP menu 23 Engish Setting the Channels NOTE When Parental Block is activated the 4 digit password is needed Auto Tuning The Auto tuning function will completely re tune the television and can be used to update the channel list NOTE Itis recommended that Auto tuning is run periodically to ensure that all new services are added NOTE All the current channels and settings for example the locked channels will be lost Tuner Mode Antenna 1 Press MENU Press lt or P to select SETUP and press to enter the submenu PICTURE SOUND SETUP APPLICATIONS PREFERENCES 2 Press A or to select Auto tuning and press x to enter the submenu Language English Country Germany Tuner Mode Antenna Auto tuning ATV Manual Tuning DTV Manual Tuning DIV gs AV connection Picture Position Quick Setup Enter Back B Press A or V to select Tuning Mode and press lt or gt to select ATV DTV or ATV and DTV Auto tuning B Previous settings will be lost Press EXIT for no change Tuning Mode 4 ATV and DTV gt Start Sc
59. nection is not supported for audio receivers NNN NT o o TOSHIBA e o ANUNTAM HDMI to DVI adapter cable not supplied DVI device For 32W23 32 39L23 15 Engish o o J lt TOSHIBA e l o o 5 M yy yyy A h i e a 1 1 t 1 1 lt HDMI to DVI adapter cable not supplied DVI device For 50L23 To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures e When turning on your electronic components turn on the television first and then the HDMI or DVI device e When turning off your electronic components turn off the HDMI or DVI device first and then the television 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the television HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries 16 Connecting a Computer With either an RGB PC or an HDMI connection you can watch your computer s display on the television
60. pad on the remote to enter the time Press A or V to select Repeat and press lt or gt to select ONCE DAILY Mon Fri Mon Sat or Sat Sun Press A or to select Input and press lt or gt to select ATV EXT 1 EXT 2 EXT 3 HDMI 1 HDMI 2 PC or DTV Press A or V to select Channel and press lt or gt to change the channel number or use the number key pad on the remote to enter the channel number NOTE e Channel is only available when the Input is ATV or DTV e Blank screen will appear if not tuned Press A or V to select Volume and press lt or gt to modify the volume or use the number key pad on the remote to enter the volume Press A or V to select Time Until Power On and press lt or gt or use the number key pad on the remote to enter the time for the TV to turn on automati cally NOTE Time Until Power On is only available when Enable DTV Clock is Off Sleep Timer The television can be set to turn itself Off after a certain length of time 56 Press MENU and press lt or gt to select APPLICATIONS Press A or to select Sleep Timer Turn off the TV Press lt or gt to modify the time the TV should turn off or use the number key pad on the remote to enter the time EPG EPG Electronic Programme Guide supports 9 sets of timers You can set or cancel a timer for a selected programme within the guide When the TV is on and the timer activates a dialogue box is shown in
61. player or DVD player is connected to the television then select the correct input by pressing Why is there a good picture but no sound Check all cable connections and that the volume has not been turned down or that the sound has not been muted gt gt 63 Q What else can cause a poor picture A oO Interference or a weak signal Try a different television station Manual fine tuning may help Select the ATV Manual Tuning in the SETUP menu Highlight the station and press 68 then press lt or gt to select Manual fine tuning ATV Manual Tuning mo Pa elele oll K Save RETURN Back l Select El Change Using A or YW to adjust to get the best picture and sound Press and then RETURN Why doesn t the remote control work Check that the batteries aren t exhaust ed or inserted incorrectly Why are there problems with text coo O Good performance of text depends on a strong broadcast signal If the text is unreadable or garbled check the aerial satellite or cable connection Go to the main index page of the text service and look for the User Guide This will explain the basic operation of text in some detail gt Why are the four coloured text numbers visible but no text Analogue Only Text has been selected while viewing an external source No text will appear on screen or a box may appear stating no information is available Select a broadcasting c
62. port the weight of the TV As an additional safety cure the TV set by using a single screw supplied measure you must secure the TV to the level surface through the fall prevention screw hole using the mounting screw as shown in the illustration Make sure to secure your TV set to a firm and The LCD display panels are manufactured using an substantial surface extremely high level of precision technology Stand style is dependent on model however sometimes some parts of the screen may be missing picture elements or have luminous spots This is not a sign of a malfunction Make sure the television is located in a position it cannot be pushed or hit by objects as pressure will break or damage the screen Also please be certain that small items cannot be inserted into slots or openings in the case j Avoid using chemicals such as air refreshers cleaning agents etc on or near the TV e Place the stand on a stable level surface and se pedestal Studies indicate that plastics may weaken and crack over time from the combi nation effects of chemical agents and mechanical stress such as weight of TV Failure to follow these instructions could result in serious injury and or permanent damaged to TV and TV pedestal Cleaning the screen and cabinet Turn off the power and clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause
63. r e Supports transfer of HD video resolution up to 1080p e MHL functions may not perform properly as some mobile devices may not incorporate the full MHL functionality NOTE These functions may not be available depending on the connected equip ment Connecting an MHL compatible Device TV using an MHL cable not supplied micro USB MHL cable not supplied When you connect an MHL compatible device to the HDMI 2 port on the TV with the MHL cable charging starts automatically NOTE Do not connect an MHL compatible device to any port other than the HDMI 2 port Connect the device to the HDMI 2 port on the 54 MHL Control Press QUICK Press A or Y to select MHL Control and press Quick access Wide Standard 00 00 Picture Size Picture Mode Sleep Timer Media Player System information HDMI CEC Control Speakers MHL Control TV Speakers 2 The Pass Through Control Panel ap pears Been MA oo NOTE The Pass Through Control Panel is only available when viewing photo video or listening to music Operating an MHL compatible Device MHL is a new mobile audio video interface standard for direct connection with MHL enabled mobile devices to MHL enabled TVs providing instant access to a wealth of mobile content with ease of control through the TV remote controller Remote Control No Item Pass Through Control Panel 1 yo Description Not entry MHL Con
64. r the sub menu Press A or V to select Audio Format and press lt or gt to select PCM or Auto Digital Audio Output Audio Format 4 Auto Audio Delay Manual Audio Delay Time ms 0 EEL Back Press A or V to select Audio Delay and press lt or gt to select Auto or Manual Press A or to select Audio Delay Time ms and press lt or gt to change the setting NOTE Audio Delay Time ms is only available when Audio Delay is Manual Audio Description Audio Description is an additional narration describing on screen action body language expressions and movements for people with visual disabilities while watching the TV This function enables you to choose the type of narrations Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or to select Audio Descrip tion and press to enter the submenu Press A or V to select Audio Descrip tion and press lt or gt to select On or Off Audio Description Audio Description Mixing Level EER Back Press A or V to select Mixing Level and press lt or gt to change the setting NOTE Mixing Level can only be ad justed when Audio Description is On NOTE Press the AD button on the remote control to switch the Audio Descrip tion On or Off 35 Engish Widescreen Viewing Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Wid
65. ramme Volume Source IR LIGHT SENSOR Headphone RED LED Standby GREEN LED Power on For 50L23 20 Switching On If the RED Standby LED is unlit check that the plug is connected to the power supply If the picture does not appear press on the remote control it may take a few moments To put the television into Standby press on the remote control To view the television press again The picture may take a few seconds to appear For energy saving We recommend that you use the television with factory settings These settings are designed for energy saving Unplugging the mains plug will reduce energy use to zero This is recommended when the television is not being used for long periods e g when on holiday Reducing the bright ness of the screen will reduce energy use Energy efficiency reduces energy consumption and can save money by reducing electricity bills NOTE Putting the television into standby mode will reduce energy consumption but will still draw some power Using the Remote Control To set up the television you will now need to use the on screen menus Press MENU on the remote control to see the menus The on screen menu appears as a list of five topics As each symbol is selected by pressing lt or gt on the navigation ring on the remote control To use the options press to enter the sub menu Then press A or Y on the navigation ring to move up and down throug
66. rt Scan Input RETURN Back Press A or V to select Start Scan and press to start tuning DTV mode Cable oO Press MENU Press lt or gt to select SETUP and press x to enter the sub menu Press A or V to select DTV Manual Tuning and press to enter the sub menu Language Country Tuner Mode Auto tuning ATV Manual Tuning English Germany Cable DTV Settings AV connection Picture Position Quick Setup Enter Back Press A or V to select Frequency Modulation or Symbol Rate and use number key pad on the remote to define the information or select Auto for tuning DTV Manual Tuning Weak Signal Strength i Quality Average Poor 4 Modulation Symbol Rate Start Scan Input Back Press A or to select Start Scan and press to start tuning Automatic Power Down The TV will automatically turn itself off standby within 4 hours if you do not touch the control buttons on the remote control or on the TV control panel It will also automatically turn off if no input signal is detected after ap proximately 15 minutes 1 In the SETUP menu press A or to select Automatic Power Down Press lt or gt to select Off 4h 6h or 8h Automatic Power Down Location Software Upgrade System Information Reset TV Back Reset TV Selecting Reset TV will reset all TV settings to 27 their original factory values 1 In the SETUP menu press A or
67. rtical Position Press MENU Press lt or P to select SETUP and press to enter the submenu SETUP PICTURE SOUND 0 APPLICATIONS PREFERENCES Press A or to select PC Setting and press to enter the submenu Language Country AV connection o PC Setting Ea Auto Adjust Ox English UK Automatic Power Down 4h Location Software Upgrade OK Enter Back Press A or to select Horizontal posi tion or Vertical position and press lt or gt to adjust the settings as required PC Setting Vertical position Horizontal width Clock phase Reset 0 0 0 LOK Back Horizontal Width In the PC Setting menu press A or V to select Horizontal width Press lt or gt to adjust the settings as required Clock Phase The Clock phase matches the PC signal with 61 the LCD display Adjusting this can clear horizontal stripes and picture blur 1 In the PC Setting menu press A or V to select Clock phase Press lt or gt to obtain a clear picture Reset This feature resets all PC settings to the fac tory settings NOTE If any PC settings have not been changed Reset is not available 1 In the PC Setting menu press A or V to select Reset O Press NOTE e When a PC is connected using HDMI none of these functions will be available e The screen is disrupted momentarily when adjusting PC setting This is not a sign of malfunct
68. st 13 2005 By participating in separate collection of products and batteries you will help to as sure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be EU collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical Hg Cd Pb symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product EU Conformity Statement CE This product is carrying the CE Mark in accordance with the related European Directives
69. t like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity Place in a location where the temperature remains between 5 C 41 F min and 35 C 94 F max Mains Supply The mains supply required for this equipment is 220 240v AC 50Hz Never connect to a DC supply or any other power source DO ensure that the television is not standing on the mains lead Use only the supplied lead DO NOT cut off the mains plug from this equip ment this incorporates a special Radio Interfer ence Filter the removal of which will impair its performance In the UK the fuse fitted in this plug is approved by ASTA or BSI to BS1362 It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted IF INDOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Do DO read the operating instructions before you at
70. t the manufacturer using the details above 8 The Remote Control Simple at a glance reference of your remote control 3 TEXT SUTE 1 1 TOSHIBA CT 90326 Switch between TV ON or Standby Switch between external input sources Still Picture To display the teletext screen TEXT subtitle pages if available Stereo Bilingual transmissions Number buttons Audio Description Switch between ATV and DTV Change the volume Change the channel S 0O0ONOOOBRWND 0 12 In TV mode Display on screen information In Text mode Access the index page 13 Mute the sound 14 Display the QUICK access menu 15 Exit the menu system 16 Display EPG 17 Goto the previous level of the menu 18 Display the on screen menu 19 Menu navigation A V lt gt In Text mode Change the page CR Confirm the selection 20 Colour button Text control buttons Reveal concealed text Hold a wanted page Enlarge text display size OB Select a page while viewing a normal picture Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted _ the right way round Suitable battery types for this remote are AAA 1 5V Do not combine a used old battery with a new one or mix battery types Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment Dispose of them in accordance with instructions on page 68 of t
71. tandby sisirain 51 System Audio Control 0 0 eee 51 Enable HDMI LINK AULO POWGE Onesta Auto Standby siisii ritirati Amplifier Control isscnssiseesivneaeesccatentescss Speaker Preference ccsseesseeseeneeeeee 52 HDMI CEC Playback Device Control 53 Using MHL TV function ceseseseees 54 Connecting an MHL compatible Device 54 MEI COntrol aaae at ieee a k 54 Operating an MHL compatible Device 55 Preference Controls cesseeee 56 OM TIMET eenaa 56 Sleep MMOs scsccssscsscescevascascesetnerscsneoateecsesees 56 EP Gis E A E E STA 57 Panell OCK ortasi ea 58 Auto Format Widescreen 58 A 3 SUCIC Ni renan a Blue Screen eeeeeeeeeeeeeeeeteeeeteeseeeeteneeeaee Side Pan l usere tiano e nirna DivX R gistratiONis iniia DivX D registratONM sciisiiriisesisrirriusis System Information Software Upgrade Text Services and Text Information 60 Setting the ModeS ccsseesceeesteeeteeees 60 Navigating Pages using AUto 60 Navigating Pages using LIST 08 60 Control BUON Siisera 60 PC Settings ssecscesseserseseseseeseneens 61 Input Signal Selection cece ee 62 Frequently Asked Questions 63 Specifications and Accessories 65 License Information cesseee 67 Engish Safety Precautions This equipment has been designed and manufactured to meet international safety standards bu
72. television are pressed If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control Auto Format Widescreen When this television receives a true Wides creen picture and Auto format is On it will au tomatically be displayed in Widescreen format irrespective of the television s previous setting 1 In the PREFERENCES menu press A or Y to select Auto Format Press lt or gt to select On or Off 4 3 Stretch When 4 3 Stretch is activated this function will switch 4 3 format programmes into a full screen picture oO In the PREFERENCES menu press A or Y to select 4 3 Stretch E Press lt or gt to select On or Off NOTE In HDMI signal format this function is available 58 Blue Screen When Blue Screen is selected the screen will turn blue when no signal is received 1 In the PREFERENCES menu press A or Y to select Blue Screen Press lt or gt to select On or Off NOTE This function is not available in DTV mode Side Panel The Side Panel feature lightens or darkens the band each side of the screen when in 4 3 or 14 9 format This helps prevent image reten tion of the band and can also make viewing in bright or dark conditions more comfortable GP In the PREFERENCES menu press A or Y to select Side Panel Press lt or gt to adjust the settings as required DivX Registration View the registration code
73. that is required to play video files that are compatible with the DivX VOD Video On Demand service on the TV DivX VOD is a video delivery service that lets you rent or purchase video content re corded in DivX format To play video files that are compatible with the DivX VOD service the TV needs to be registered as a DivX player In the PREFERENCES menu press A or Y to select DivX Registration and press 69 You must register your device to play DivX protected videos Registration code XXXXXXXXXX Register at http vod divx com DivX Deregistration In the PREFERENCES menu press A or to select DivX Deregistration and press Press lt or gt to select OK to confirm or select Cancel to exit and press Your device is already registered Are you sure you wish to deregister Cancel Press lt or gt to select OK to confirm or select Cancel to exit and press W Deregistration code XXXXXXXK Deregister at http vod divx com Continue with registration J Cancel Press to exit You must register your device to play DivX protected videos Registration code XXXXXXXXXX Register at http vod divx com 59 System Information In the SETUP menu press A or V to select System Information and press to display the model information and firmware version System Information TOSHIBA 2013 Nov 9 2012 17 48 06 FW v0 08 SR Back Software Upgra
74. to normal size amp Selects a page while viewing a normal picture Enter the page number then press B a nor mal picture will be displayed The television will indicate when the page is present by display ing the page number at the top of the screen To display news flashes Select the news flash page for the chosen text service see the index page of your text service By pressing amp news flashes will be dis played as and when they are broadcast Press OB again to cancel the display How to change the page Press A or V to change the page Press lt or gt to change the sub page when a sub page is available The news flash page must be cancelled before changing channels Connect the PC as shown in the Connecting a Computer section and ensure that a picture is showing on the television screen The picture position may now be adjusted to suit personal preference PC Settings Most of the picture controls and functions are available However features not available will be greyed out In the PC input mode the Manual Setting is not displayed First press until the video input mode list appears on the screen then press A or V and W in order to select the PC input mode This function may not be available for some signal or if no signal is received The optimum points of the clock phase and sampling clock adjustments may be incomprehensible according to the input signals Horizontal and Ve
75. trol Remote Control 2 EXIT Exit In contents menu Up Down Left Right Select RETURN Exit MHL Control Pass Through Control Panel GUIDE Record EXIT Close the Pass Through Control Panel When viewing the video or listening to music Pause Stop Rewind Forward Play Skip Reverse Skip Forward 55 Engish Preference Controls On Timer This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time Press MENU Press lt or gt to select APPLICATIONS and press to enter the submenu APPLICATIONS PREFERENCES SETUP PICTURE SOUND Press A or V to select On timer and press to enter the submenu APPLICATIONS 00 00 Lok Sleep Timer Demo Enter Back Press A or YW to select Enable On Timer and press lt or gt to select On or Off On timer Enable On Timer Enable DTV Clock F ime Input Channel Volume Time Until Power On Back NOTE The settings are only available when Enable On Timer is On Press A or to select Enable DTV Clock and press lt or gt to select On or Off NOTE Power On Time and Repeat are only available when Enable DTV Clock is On 7 o Press A or V to select Power On Time and press lt or gt or use the number key
76. utput Audio Description Back Bass Treble and Balance The sound controls are accessible in digital and analogue modes Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or to select Bass Treble or Balance and press lt or gt to change the setting 33 Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a com mercial Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or V to select Stable Sound and press lt or gt to select On or Off Dynamic Range Control This feature allows control of audio compres sion for some digital TV programmes MPEG 1 and MPEG 2 audio programmes are not sup ported Press MENU Press lt or gt to select SOUND and press 6 to enter the submenu Press A or to select Dynamic Range Control and press lt or gt to select On or Off Voice Enhancement Voice Enhancement emphasises the fre quency range of the speaker s voice making it easier to catch what they are saying Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or Y to select Advanced Sound Settings and press to enter the submenu Press A or V to select Voice Enhance ment and press lt or gt to select On or Off Advanced Sound
77. weight TV without stand Dimensions H x W x D mm approx 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 16 9 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 32W23 32L23 39L23 50L23 lt 0 3W lt 0 3W lt 0 3W lt 0 3W 1366 x 768 1920 x 1080 1920 x 1080 1920 x 1080 7W 7W 7W 7W 7W 7W 7W 7W 63W 65W 105W 162W 6 0kg 6 0kg 8 0kg 17 5kg 8 5kg 8 5kg 12 0kg 22 5kg 5 2kg 5 2kg 7 0kg 15 7kg 504 x 736 x 180 504 x 736 x 180 590 x 891 x 200 743 x 1136 x 230 Engish Headphone Socket R3 5mm stereo Operating Conditions Temperature 5 C 35 C 41 F 94 F Humidity 20 80 non condensing Accessories Remote control 2 batteries AAA IEC R03 1 5V Quick Start Guide Screw SUPPORT SND reast visir WWW TOSHIBA CO UK TV DVD SUPPORT OR CONTACT THE TOSHIBA CUSTOMER A HELPLINE ON 0871 495 0730 Register your TV online at www toshiba co uk registration 66 Specification is subject to change without notice License Information CXIDOLBY Manufactured under license from Dolby pigitaLpLus Laboratories Dolby and the double D sym PULSE bol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or reg istered trademarks of HDMI Licensing LLC
78. wing modes and all stored external equipment The HDMI LINK icon appears auto matically after detected with HDMI CEC compatible equipment Press A or W to highlight the input source shown with the HDMI LINK icon HDMI LINK Press gt and the device selection menu appears showing all connected HDMI CEC equipment Press A or V to highlight the desired HDMI CEC equipment and then press to select HDMI1 Disc Player HDMI LINK HDMI CEC Menus By activating the Enable HDMI LINK feature in the HDMI CEC Control menu individual HDMI LINK features can then be activated One Touch Play The function of HDMI CEC will automatically power on the television that was in standby mode and switch the television s input source to the port connected with the audio video equipment by powering on or playing from the audio video equipment NOTE This feature is dependent on the connected equipment and television setting System Standby This feature automatically switches the con nected equipment into standby when the television goes into standby and conversely for the television to switch into standby when connected equipment goes into standby It is selected in the HDMI CEC Control menu NOTE This feature is dependent on the connected equipment and television setting System Audio Control Using the Speaker Preference feature allows the television s remote control to adjust the volume or mute the sound

Toshiba L2353/50 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents