Toro TR50XT Series Specifications
Contents
1. Bidding Specifications The full part circle sprinklers shall be a gear driven rotary type The sprinkler shall be capable of covering ___ feet radius at___ pounds per square inch pressure with a discharge rate of __ gallons per minute Water distribution shall be via a nozzle mounted in the riser All eight 8 nozzles shall be interchangeable The body and cap of the sprinkler shall be injection molded from ABS a non corrosive impact resistant UV resistant heavy duty plastic material The sprinkler shall have a plastic filter screen sized to prevent entry of foreign material to the nozzle All parts shall be removable through the top of the sprinkler case The sprinkler shall have a single piece riser body seal that regulates flushing during pop up and retraction to clear any debris from around the riser and a stainless steel spring to ensure positive retraction The seal shall be a single piece injection molded from polyurethane Arc patterns may be set between 30 and 360 Once set to full circle the sprinkler will operate continuously in the same direction The sprinkler shall have a color coded nozzle tree with nozzles ranging from TR50 TR50XT 1 to 9 GPM 4 34 LPM TR70XI 7 27 GPM 28 41 LPM The sprinkler shall have an adjustable Trujectory feature XT models only allowing the trajectory to be set anywhere between 5 for low angle to 25 for normal operation The sprinkler shall have2. an X Flow device XT models only allowing the installer to turn off the flow of a nozzle while other sprinklers in the system are in operation The sprinkler shall have a radius adjustment screw allowing up to 25 reduction in radius This operates independently of TruJectory which also reduces radius The sprinkler shal have an over molded wiper seal for greater debris resistance when burying the sprinkler 4 13mm below grade Rotation shall be accomplished by a water lubricated cluster gear drive assembly driven by a variable stator that maintains consistent speed of rotation through all nozzle flows The variable stator shall require no adjustment when changing nozzles or arc discs Recommended All adjustments made to the TR Series Installation Instructions rotors are done from the top of the sprinkler using the black arc adjustment band on the riser A lavender effluent water use cap shall be available for non potable water applications A 20mm NPT plug shall be provided with all side inlet models to plug the unused inlet For recommended installation instructions refer to Toro form numbers 373 0289 TR70XT Series 373 0290 TR50 Series 373 0291 TR50XT Series High Pop The sprinkler shall be of pop up design with an overall height of 17 425mm a body diameter of 2 60mm and a pop up stroke of 12 300mm The sprinkler shall be capable of installation 13mm below grade level and sha
3. ll have a 20mm NPT female inlet A check valve capable of holding back 8 2 4m of elevation change shall be standard The check valve shall be reversible if a check valve is not required Lawn Pop Up The sprinkler shall be of pop up f design with an overall height of 7 193mm a body diameter of 2 60mm and a pop up stroke of 5 127mm The sprinkler shall be capable of installation 4 13mm below grade level and shall have a 20mm NPT female inlet A check valve capable of holding back 8 2 4m of elevation change shall be standard The check valve shall be reversible if a check valve is not required Shrub The sprinkler shall be of shrub design with an overall height of 6 50mm and a base diameter of 2 60mm The sprinkler shall be capable of mounting above grade and shall have a 4 20mm 13mm NPT female inlet A check valve capable of holding back 8 32 4m of elevation change shall be standard The check valve shall be reversible if a check valve is not required The sprinkler shall be developed and manufactured by an ISO 9001 certified facility The sprinkler shall be a model number and shall be manufactured by The Toro Company Irrigation Division Riverside California U S A 24
Download Pdf Manuals
Related Search