Top Innovations SF-680 User's Manual
Contents
1. Pull Water Reservoir out Note that Water Reservoir cannot be completely removed from unit do not attempt to force it free Remove Water Reservoir Cap to expose Water Reservoir fill hole Using Measuring Cup included fill Water Reservoir up to the MAX 300 ml line with distilled water Replace Water Reservoir Cap and push filled Water Reservoir back into main unit NN hn aI OPERATING DIGITAL FABRIC STEAM PRESS 1 Plug power cord into electrical outlet and set On Off Switch to On position FIGURE 1 2 Identify type of fabric you are going to press and select corresponding temperature setting using Temperature Control Buttons Note that it is best to start with the most delicate fabrics ee first as higher levels of heat will cause damage to Nylon and Silk Lay fabric flat on Ironing Board Digital Fabric Steam Press is ready for use when l Pressing Indicator Light deactivates If pressing FIGURE 1 wool you may choose to spray with a burst of steam This function is available once Steam Burst Ready Indicator Light illuminates A w NOTE Do not activate burst of steam with unit completely closed as this may damage unit Best results are obtained if Pressing Plate is held open approxi mately 75 mm above Ironing Board before pressing Steam Burst Button For safety reasons do not hold Pressing Plate open more than 75 mm when using steam burst function 5 To press lower Pressing Plate ge2. in maxi mizing the power of steam Enjoy your new Digital Fabric Steam Press Za Benny Lee Chairman and CEO Top Innovations Inc Top Innovations Inc SioomFast WV esa ANEN NON WARNING To reduce the risk of fire electrical shock or injury the following basic safety precautions should always be followed when using an electrical appliance READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM PRESS DO NOT leave your SF 680 Digital Fabric Steam Press unattended when plugged in or not in use A this unit is not a toy Close supervision is required when using unit near children pets and plants Unit produces steam that is hot and pressurized Care must be taken to avoid burns or other injuries N w Always unplug electrical cord when unit is not in use DO NOT use this unit if electrical cord or outlet is damaged DO NOT use unit if it is not working properly or has been dropped damaged or left outdoors If such damage occurs return unit to a licensed service technician for repairs A This unit is an electrical appliance DO NOT submerge it in water DO NOT use electrical cord as a handle DO NOT allow cord to be crimped by closing it in doors DO NOT pull or stretch cord around sharp corners or edges Be sure to keep electrical cord away from all heated surfaces DO NOT use this unit with extension cords or electrical outlets that have inadequate current capacity A three prong outlet
3. 2 seconds After the beeping sound has stopped the heating ability of the unit can only be restored in by pressing the Temperature Control Buttons IMPORTANT Auto Shut Off does not mean that power to the unit is totally cut off Power is always on and the Power Indicator Light will remain illuminated until On Off Switch is set to Off position CLEANING THE DIGITAL FABRIC STEAM PRESS Place Pressing Cushion in the middle of Ironing Board Place a clean towel over Pressing Cushion and Ironing Board Set Temperature Control Buttons to the highest setting LINEN When Steam Burst Ready Indicator Light illuminates lower Pressing Plate onto Pressing Cushion 5 Press Steam Burst Button six times 6 Allow Pressing Plate to cool 7 Clean Pressing Plate with damp cloth Do not use abrasive materials as this may damage Pressing Plate 8 Ironing Board fabric cover is removable for cleaning Hand wash only with mild detergent oh PROPER STORAGE 1 Once pressing is complete immediately turn unit off and unplug power cord from electrical outlet 2 Allow unit to cool completely at least 30 minutes 3 Lower Pressing Plate down and turn Locking Knob to Lock position 4 Wrap up power cord and place in Cord Storage Compartment 5 Store all accessories safely away preferably near Digital Fabric Steam Press 6 Store Digital Fabric Steam Press in a cool dry place Top Innovations Inc 9 10 i CUSTOMER SUPP
4. MODEL SF 680 Fast m Digital Fabric Steam Press by Top Innovations Inc Please read all instructions before use Mail in your warranty registration card Se Fast LETTER FROM THE CEO Dear Valued Customer Congratulations on purchasing your new Digital Fabric Steam Press This powerful new product is designed to give your garments a clean wrinkle free ironed look without the hassle of using a conventional iron Turn your Digital Fabric Steam Press on and in minutes you are ready to delicately remove wrinkles from garments and restore crisp long lasting creases With a pressing surface that is up to ten times larger than most hand held irons the Digital Fabric Steam Press can reduce your ironing time by up to 50 giving you more free time to do the things that really matter to you When you combine this with features like multiple dry and steam settings a powerful steam burst func tion variable temperature control and an automatic shut off safety system you will find that the Digital Fabric Steam Press is capable of doing everything you need and much much more Top Innovations Inc would like to invite you to take advantage of our Customer Support web site at www topinnovations com On this website you will find additional information about many other exciting products that are available helpful tips on ways in which you can utilize your Digital Fabric Steam Press and other useful information to assist you
5. ORT Unit fails to steam Power Indicator Light does not illuminate Unit fails to steam Power Indicator Light does illuminate Steam Burst output is weak or intermittent Unit is not plugged in Household Circuit Breaker Ground Fault Interrupter has tripped or blown a fuse Auto Shut Off has engaged Water Reservoir is empty Unit is damaged or malfunctioning Pressing Plate needs to be cleaned Plug into electrical outlet Reset Circuit Breaker Ground Fault Interrupter or replace fuse If you need assistance contact a licensed electrician Refer to Auto Shut Off section on page 9 of this manual for proper procedure Refill Water Reservoir using procedures on page 7 of this manual Please contact our customer support department Refer to Cleaning the Digital Fabric Steam Press section on page 9 of this manual for proper procedure CUSTOMER SUPPORT For problems with your steamer please refer to the Troubleshooting Guide located above Additional inquiries should be directed to our Customer Support services at 800 711 6617 or 816 584 9700 ext 102 or 130 or e mailed to customerservice topinnovations com Top Innovations Inc ONE YEAR LIMITED WARRANTY If outside USA additional shipping charges may apply Top Innovations Inc warrants this product to be free from defects in material and workmanship for a period of one 1 year from the date of purchase This wa
6. OT place arms or hands between Pressing Plate and Ironing Board while unit is in operation When filling your Digital Fabric Steam Press with distilled water DO NOT fill Water Reservoir past MAX 300 ml line Before filling unit with water always take the following steps 1 Turn appliance off 2 Unplug electrical cord Failure to follow these steps may result in electric shock and injury Only water should be used in unit Other cleaning agents will damage unit and can cause injuries DO NOT operate unit if steam openings are blocked Should this occur shut unit off and unplug Store your SF 680 Digital Fabric Steam Press in a cool dry place Always allow unit to cool completely before storing SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Top Innovations Inc See Fast DIGITAL FABRIC STEAM PRESS PRODUCT oe INFORMATION The following features and accessories are included with your steam press Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging To obtain possible missing parts refer to the Customer Support section on page 10 of this manual UNIT FEATURES AND ACCESSORIES Handle Steam Burst Buttons Water Reservoir Cap Water Reservoir lroning Board Pressing Plate Pressing Plate Cover On Off Switch Locking Knob Power Indicator Light Red Pressing Indicator Light Green Steam Burst Ready Indicator Light Yellow Temperature Control Buttons Cord Stor
7. age Compartment Measuring Cup Spray Bottle Pressing Cushion oo So 2 ONS oP Oo NS Top Innovations Inc 5 DIGITAL FABRIC STEAM PRESS PRODUCT INFORMATION The Handle 1 is used to safely lift up and lower the Pressing Plate and carry the unit The Steam Burst Buttons 2 are located on either side of the Handle and produce a powerful burst of steam when pressed The Water Reservoir Cap 3a covers the Water Reservoir fill hole and must be removed in order to fill the Water Reservoir with distilled water The Water Reservoir 3b is the tank in which distilled water is stored for use by the unit There must be water in the Water Reservoir in order for the units steam burst function to work correctly The Ironing Board 4 is the padded surface onto which fabric is placed during pressing The fabric cover is removable and can be washed The Pressing Plate 5 is the temperature controlled teflon surface that heats and presses fabric The Pressing Plate Cover 6 is the stainless steel cover that protects the Pressing Plate The On Off Switch 7 activates and deactivates the unit The Locking Knob 8 locks the Pressing Plate and Ironing Board together This allows for carrying and storage of the unit The Power Indicator Light Red 9 illuminates when the On Off Switch is set to the On position providing you with a clear visual indication that the unit is powered on The Pressing Ind
8. icator Light Green 10 illuminates while the unit is heating to the selected temperature When deactivated this indicates that you are ready to press The Steam Burst Ready Indicator Light Yellow 11 illuminates once the unit is ready to produce bursts of steam providing you with a clear visual indication that you can begin using the Steam Burst Buttons The Temperature Control Buttons 12 are pushed to select a desired temperature Press the right arrow button to cycle right through the list of fabric choices above the buttons and press the left arrow button to cycle left through the list of fabric choices above the buttons The Cord Storage Compartment 13 provides a convenient and easily accessible place to store the power cord The Measuring Cup 14 is designed to assist you in easily filling the Water Reservoir with distilled water The Spray Bottle 15 allows you to moisten fabrics before pressing which helps to make the pressing process easier and more effective in certain instances The Pressing Cushion 16 is a fabric covered pad used for pressing gathered or contoured areas such as sleeves darts or yokes 6 Top Innovations Inc See Fast eS Netia ae eae emen S FILLING WATER RESERVOIR Place Digital Fabric Steam Press on a flat level surface Turn Locking Knob to Unlock position to unlock Pressing Plate Lift up Pressing Plate using Handle It will automatically stay in lifted position
9. ntly onto fabric and Ironing Board Hold there for 8 10 seconds then lift up Pressing Plate Repeat until you have achieved desired crease and smoothness Once pressing tasks are complete immediately set On Off Switch to Off position Refer to page 9 of this manual for further information about cleaning and storage of Digital Fabric Steam Press na Top Innovations Inc 7 SoomFast USING THE DicitaL Fasric STEAM PRESS STEAM BURST 1 Hold Pressing Plate approximately 3 above Ironing Board 2 Press Steam Burst Button to release a burst of steam onto fabric 3 Lower Pressing Plate onto fabric then raise once again 4 Repeat steps 1 3 above until fabric is smooth and wrinkle free PRESSING AND STEAMING TIPS Pressing Shirts and Blouses 1 Place shoulder yoke on Ironing Board first and press 2 Next place sleeves onto Ironing Board with fold parallel to long seam and press 3 Place cuffs onto end of Ironing Board and press 4 Place bottom of shirt behind Ironing Board Begin by pressing the side with pocket Pull shirt towards you as you press each section 5 Finish by pressing collar of shirt Pressing Pants 1 Place Pressing Cushion under waistband and press repositioning waistband until completely pressed 2 To press inseam place Pressing Cushion under area to be pressed 3 Place pleated area on Ironing Board Carefully fold pleats and press 4 Embroidery should be placed face down on Ironing Boa
10. or a properly grounded adapter is necessary when using SF 680 Digital Fabric Steam Press A A In order to unplug SF 680 Digital Fabric Steam Press grasp plug and pull smoothly and firmly from outlet DO NOT attempt to unplug unit by pulling or tugging on cord a Use caution when operating unit as burns can occur from touching hot metal parts or from close proximity to steam SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Top Innovations Inc 3 O2 TIF AST EMRO NNW ESY Val O 10 51 BSS WARNING To reduce the risk of electric shock this appliance has a three pronged plug This plug will fit in a polarized wall outlet only one way If the plug does not fit fully in the outlet contact a licensed electrician to install a proper outlet DO NOT attempt to modify the plug or defeat this safety feature 8 DO NOT handle or use this unit while hands are wet or when not wearing shoes 9 10 11 1 N 13 14 15 To avoid falls and other injuries be sure to dry any wet areas on floors and to stand away from damp surfaces while using steam press SF 680 Digital Fabric Steam Press is only meant to be used with recommended SF 680 accessories Other types of accessories are not to be used with Digital Fabric Steam Press Doing so may cause injuries or damage to unit Surfaces become hot during use To avoid injuries DO NOT touch Pressing Plate or any other surface while using this appliance DO N
11. rage under this warranty you may contact the Warranty Service Department by telephone at 800 711 6617 or 816 584 9700 ext 102 or 130 or e mail customerservice topinnovations com Top Innovations Inc Fast 11 Oe Fast Top Innovations Inc 400 N W Platte Valley Dr Riverside MO 64150 Tel 800 711 6617 816 584 9700 www topinnovations com customerservice topinnovations com UL is Printed in China V040415
12. rd to reduce wear and prevent damage to delicate areas Other Techniques Placing Pressing Cushion between fabric and Pressing Plate may help with delicate fabrics Buttons and zippers If you have older types of buttons or zippers you may need to take special care to avoid melting In order to do so place garment face down and cover with Pressing Cushion before pressing Spray Bottle may be used to spray fabrics lightly This will further help to remove exceptionally stubborn wrinkles Place a damp cloth over fabric before pressing which will help with stubborn wrinkles or heavy gauge fabrics To press large pieces of fabric place entire piece behind Ironing Board Pull fabric towards you over Ironing Board and lower Pressing Plate Press fabric in sections until completed 8 Top Innovations Inc vena AUTO SHUT OFF The Auto Shut Off feature of the Digital Fabric Steam Press includes both an Auto Shut Off and an Auto Wake Up These multiple function safety features deactivate electrical power to the heater when the Pressing Plate has been left in closed position against the Ironing Board for more than 10 seconds Heater deactivation is signaled by a beeping sound Heater functionality is restored when the Pressing Plate is lifted back up Power to the heater will also be cut if the Pressing Plate is left in the lifted position without use for approximately 15 minutes signaled by a beeping sound for approximately 2
13. rranty does not cover damage caused by misuse negligence use by improper current or voltage use contrary to operating instructions or disassembly repair or alteration by any person other than Top Innovations Inc Warranty Service Department Top Innovations Inc will repair or replace at its option This warranty gives you specific legal rights and may have other rights which may vary from state to state Performance of any obligation under this warranty may be obtained by 1 Call 800 711 6617 or 816 584 9700 for Return Authorization Number before returning for repair Failure to obtain a Return Authorization Number will cause a delay in warranty and out of warranty service requests 2 Include copy of purchase receipt 3 Include your name address telephone number and Return Authorization Number on returned package Please send product postage prepaid to TOP INNOVATIONS INC WARRANTY SERVICE DEPARTMENT 400 N W PLATTE VALLEY DR RIVERSIDE MO 64150 Should there be any missing or defective parts or accessories please contact Customer Support In most cases it is not necessary to return the entire unit We can ship most parts directly to your door Upon expiration of 1 year limited warranty you will be advised of the repair cost before any services are performed However you may enclose a note indicating that you would like us to proceed with repairs without first notifying you If you have any questions about cove
Download Pdf Manuals
Related Search