Teledex C1100 User's Manual
Contents
1. based on the standards EN 60950 1992 A1 A2 A3 A4 A 11 EN 41003 1998 Test report Nr GOM20106 4905 L Dated June 19 2001 e R amp TTE Directive 1999 5 EC on the approximation of the laws of the member states relating to network connection and radio spectrum matters based on the following standards I CTR 37 1998 TBR 10 1997 TBR6 1997 e R amp TTE Directive 1999 5 EC and Council Directive 89 336 EEC on the approximation of the laws of the member states relating to electromagnetic compatibility based on the following standards EN 301 489 1 6 EN 50081 1 EN 50082 1 CONGRATULATIONS AND THANK YOU Congratulations on your purchase of this high quality Teledex made European ETSI DECT based hospitality guestroom cordless telephone Teledex LLC is the world s leading hospitality telephone supplier with over five million phones shipped worldwide If you have any questions about this telephone please feel free to contact us via one of the methods below We appreciate your purchase CONTACTING TELEDEX Telephone 01 408 363 3100 Address 6311 San Ignacio Avenue Internet www teledex com San Jose CA USA email sales teledex com 95119 To Mute THE HANDSET The MUTE key is used to deactivate the handset microphone while allowing the user to hear the other end of the conversation through the handset 1 Press the MUTE key to activate The MUTE LED will illuminate 2 To turn off the mute feature press MUTE again T2. please specify the telephone model and guantity desired BATTERY DISPOSAL INFORMATION When disposing used or expired battery packs please observe local industrial and con sumer waste disposal practices rules and regulations Under no circumstances dispose the battery pack s in a flammable and or combustible trash receptacle CHARGING THE BATTERY The rechargeable Nickel Metal Hydride battery must be fully charged before using the phone for the first time It is recommended that the battery pack be charged overnight or for at least 12 hours without interruption before the first use To charge the battery place the handset keypad down in the base unit Ensure that the CHARGE LED on the base illuminates If the LED does not light check the following a Ensure that the AC adapter is plugged into a working unswitched AC outlet b Ensure that the contacts on the bottom of the handset bottom are making good contact with the base unit charging contacts CLEANING THE BATTERY CONTACTS To maintain the handset in fully charged condition it is important to clean all charging con tacts on the handset and base unit Use a pencil eraser or other contact cleaner Do not use any liquids or solvents to clean these contacts ADJUSTING THE BASE RING VOLUME To adjust the ringer volume of the base unit locate the respective Line Ringing Volume adjustment control on the back of the telephone labeled RINGER LOW HI Slide the switch
3. to the desired setting ADJUSTING THE HANDSET RING VOLUME The handset ring volume can be adjusted by pressing the volume UP and DOWN keys on the handset during the ringing or idle mode ADJUSTING SPEAKERPHONE VOLUME To adjust the speakerphone volume press the volume UP and DOWN keys on the base unit Press volume UP key to increase the volume level Press the volume DOWN key to decrease volume level ADJUSTING HANDSET RECEIVE VOLUME To adjust the handset receiver volume press volume UP and DOWN keys on the hand set while the handset is on line Volume control is also available during mute LiGHTED KEYPADS The keypad on the handset will illuminate if one of the keys is pressed It will turn off after a few seconds If the ON key is pressed the keypad will illuminate and then go off after a few seconds except the ON key This is to indicate that the phone handset is on The light will turn off when the OFF key is pressed Low BATTERY INDICATOR When the handset battery level is low the LED indicator will blink when the phone is not in use When the phone is in use the LED will blink and the handset will emit a beep tone Return the handset to the base cradle for recharging as soon as is practical PROGRAMMING THE HOTEL SERVICES DIRECT ACCESS KEYS The CL1100 series has either six model CL1106 or eleven model CL1111 programmable hotel services direct access or aut
4. IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 2 3 4 5 6 7 8 9 10 11 12 Read and understand all instructions Follow all warnings and instructions marked on the product Unplug the product from the wall outlet before cleaning Do not use liquid cleaner or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bathtub wash bowl kitchen sink laundry tub in a wet basement or near a swimming pool Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet are provided for ventilation to protect the telephone from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on the bed sofa rug or a similar surface This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or cause a short circuit that could result in fire or electrical shock Do not spill liquid of any kind on the product To reduce th
5. e risk of electrical shock do not disassemble this product Take it to a qualified serviceperson when service or repair work is required Opening or removing covers can expose you to dangerous voltages or other risks Incorrect reassembly can cause electric shock when the appliance is subsequently used Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions e When the power supply cord or plug is damaged or frayed e Tf liquid has been spilled into the product e Ifthe product has been exposed to rain or water e Ifthe product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and may require extensive work by a qualified technician to restore the product to normal operation e If the product has been dropped or the cabinet has been damaged e Ifthe product exhibits a distinct change in performance Avoid using a telephone other than a cordless type during an electrical storm There may be a risk of electrical shock from lightning Do not use the telephone to report a gas leak while you are in the vicinity of the leak Do not dispose of batteries in fire as they may explode Please dispose of batteries in an acceptable trash receptacle USER SAFETY STATEMENT Excessive and prolonged use of radio wireless telephones ma
6. he MUTE LED will turn off To Mute THE SPEAKERPHONE 1 Press the MUTE key on base The MUTE LED will illuminate to indicate that mute is active 2 Press the MUTE key again to disable mute The MUTE LED will turn off PAUSE Pause can be entered during off hook manual dialing and chain dialing This is a means of allowing a complex number to be redialed Pause has been inserted for the handset and the base Pause can be stored into the memory of hotel services direct access keys PAGING This key initiates a handset page When paging is active the handset will beep The mes sage LED and the ON LED key on the handset will flash To page 1 Press PAGE key on the base The handset will beep 2 The handset will stop beeping if answered by pressing ON or OFF key on the handset or by pressing the PAGE key on the base again Note The handset will not beep if the handset is in use Note f the page is stopped by pressing the ON or OFF key within 30 seconds of receipt of the page from the base the handset cannot receive another page immediately MESSAGE WAITING When a voice message waiting signal is received the message waiting LEDs on both the handset and base will blink Both LEDs will turn off once the message has been retrieved REPLACEMENT PARTS Additional battery packs and replacement handsets for the CL1100 series are available from Teledex When ordering
7. l to be diverted from the base to the handset USING THE HOTEL SERVICES DIRECT Access Auto DIAL KEYS using the speakerphone 1 Press SPEAKERPHONE key The SPEAKERPHONE LED will illuminate 2 Listen for dial tone then dial the desired number by pressing the hotel services direct access key where the number was stored 3 To end the call press SPEAKERPHONE key again The SPEAKERPHONE LED will go out using the handset 1 Pick up the handset and press ON key The ON LED will illuminate 2 Listen for a dial tone then dial the desired number by pressing the hotel services direct access key on the base where the number was stored 3 To end the call press the handset OFF key The ON LED will go out LAST NUMBER REDIAL ON BASE 1 Press the SPEAKERPHONE key The SPEAKERPHONE LED will illuminate 2 Press the REDIAL key and the telephone will dial the last number dialed 3 To end the call press SPEAKERPHONE again The SPEAKERPHONE LED will turn off LAST NUMBER REDIAL ON THE HANDSET 1 Pick up the handset and press the ON key The ON LED will illuminate 2 Press the REDIAL key and the telephone will dial the last number dialed 3 To end the call press the OFF key The ON LED will turn off FLASH ON BASE The FLASH key is dedicated to perform a timed loop break while the speakerphone is in use Flashes can be sto
8. o dial keys M1 M6 M11 These keys can be pro grammed to automatically dial telephone numbers or activate telephone system features These keys can only be programmed from the base unit To program the keys follow these steps 1 Connect the CL1100 series to a working telephone line 2 Press the SPEAKERPHONE key The speakerphone LED will illuminate 3 Enter the target telephone number including PAUSE as required The number sequence can be up to 32 digits long including PAUSE and FLASH 4 Press the STORE key twice 5 Press the auto dial key where the number is to be stored 6 Press the SPEAKERPHONE key to disconnect The speakerphone LED will go out RECEIVING A CALL When the CL1100 series receives an incoming call both the base and handset will emit an audible ringing tone The message LED and the ON key LED on the handset will be flashing following the ring cadence To take the call with the handset not on the base cradle 1 Pick up the handset 2 Press the ON key to answer the call 3 The ON LED will illuminate 4 To end the call place the handset on the base cradle or press the OFF key with the handset resting on the base cradle 1 Pick up the handset 2 The handset will automatically answer the call and the ON LED will illuminate 3 To end the call place the handset on the base cradle or press the OFF key USING THE SPEAKERPHONE 1 Press
9. red in memory dial seguences There are three flash programming keys recessed to select different flash times FLASH ON HANDSET Redial is active when the FLASH key is pressed The numbers that have been dialed while using the phone will be redialed when the REDIAL button is pressed after pressing the FLASH key PREPARING TO USE THE CL1100 SERIES TELEPHONE HANDSET 1 Prepare to install the battery into the handset by first removing the rubber screw cover and the screw beneath Then firmly press down on the top of the battery compartment cover and slide it towards the bottom of the handset until it is removed 2 Insert the battery connector into the connector inside the handset 3 Replace the battery compartment cover retaining screw and rubber screw cover Note The handset may emit a beep tone when the battery is connected The ON key will blink to indicate the handset is searching for the base It will stop blinking when the handset is registered to base This is an indication that the telephone is ready to be used To ensure optimal performance of the telephone charge the battery overnight See charging details under Charging the Battery BASE 1 Insert either end of the RJ 45 cable into the jack on the back of the telephone labeled LINE 2 Insert the other end of the cable into the jack on the AC adapter labeled PHONE Note The base may emit a beep tone when the power is
10. s base handset registration information 2 On the base unit immediately press and hold the PAGE button on the base Once you hear two beep tones release the button The ON button will continue to flash red and the two tone melody will continue while the handset searches for the base The melody will change to a four tone note and shortly after the red ON light will extinquish The handset then emits another two beep tones to confirm registration Note The maximum number of handsets that can be registered with a single base unit is 5 five
11. switched on 3 Insert one end of the RJ 11 line cord into the jack on the AC adapter labeled LINE 4 Insert the other end of this line cord into a telephone wall outlet jack 5 Plug the AC adapter into an available unswitched electrical wall outlet 6 Remove the plastic overlay and place the paper faceplate over the keys Replace the plastic overlay by hooking the tabs on the overlay into the recessed slots located on both sides Hint The overlay is easiest to insert when the left or right side tabs are inserted first and the middle of the overlay is slightly bowed to allow for insertion of the other tabs 7 Place the cordless handset on the base unit Note The speakerphone may turn on and speakerphone LED illuminate when the base unit is first powered on Press the Speakerphone On Off button to reset the speakerphone to the off position To PERFORM BASE HANDSET REGISTRATION PROCEDURE TO REGISTER THE CL1100 SERIES HANDSET TO THE BASE 1 Connect base unit to energized power outlet and working telephone line 2 On the handset press and hold the line OFF button and simultaneously connect the battery to the battery connector When you hear a repeating two tone melody and the ON key flashes red release the line OFF button and press number 7 on the keypad The two tone melody will change in pitch The telephone is now in registra tion mode During this period it also clears deregisters the previou
12. the SPEAKERPHONE key on the base unit The speakerphone will answer the call The SPEAKERPHONE LED will turn on to indicate that speakerphone is activated 2 To end the call press SPEAKERPHONE key again The SPEAKERPHONE LED will turn off To PLACE A CALL USING THE HANDSET 1 Press the ON key on the handset The ON LED will illuminate 2 Listen for dial tone then dial the desired number 3 To end the call press OFF key The ON LED will turn off To PLACE A CALL USING THE SPEAKERPHONE 1 Press the SPEAKERPHONE key The SPEAKERPHONE LED will illuminate 2 Listen for dial tone then dial the desired number 3 To end the call press the SPEAKERPHONE key again The SPEAKERPHONE LED will turn off To Make A CALL USING THE HANDSET WHILE DIALING WITH THE BASE KEYPAD 1 Pick up the handset and press the ON key The ON LED will illuminate 2 Listen for dial tone then dial the desired number using base keypad 3 To end the call place the handset on the base cradle or press the OFF key Note Calls can only be made or received through either the handset or base If the hand set is already in use pressing the SPEAKERPHONE key will not activate the speaker phone To use the speakerphone make sure the handset is not turned on or that the handset is resting on the base cradle Lifting the handset or pressing the ON key will cause the cal
13. y negatively impact operator health Radios are radiation emitting devices and radio transmissions electromagnetic in nature are known to effect human tissue changes In 2000 a United Kingdom government sponsored scientific inquiry warned children to avoid excessive use of mobile phones Additional research study of htis subject is being conducted by worldwide scientists and healthcare professionals Copyright 2001 Teledex LLC All rights reserved Part Number 600 0480 46 CL1100 SERIES USERS GUIDE 1 88 1 90 GHz Single Line Digital Cordless Guestroom Telephone TELEDEX CL1100 SERIES TELEPHONE DIAGRAM Charge LED Message Waiting Lamp Flash Programming Z er 278 Keys i pee 100 ms A 300 ms 600 ms LoB i gt Q 7 E Pause Key A On Off IST yates ee Store Key All CO Programmimg Port Keys OS Mute O O O Auto Dial Keys M1 M5 model CL1106 O O O M1 M10 model CL1111 oog Z7 SS OOO Redial 1 51 Volume DTMF Keys Flash L2 OO Keys 884888 Volume Keys 209000 Paging Key Cogooo RAC Speakerphone Auto Dial Key Redial Flash Mute M6 model CL1106 M11 model CL1111 EC DECLARATION OF CONFORMITY This product has been certified by an independent accredited test house that it complies with the requirements of the following directives European Community Directive 73 23 EEC and 93 68 EEC
Download Pdf Manuals
Related Search