Home

TechniSat HD S2X User's Manual

1. gt Press the green function key Menu and use the arrow keys up down to mark the line Jump to mark gt To jump to this mark confirm by pressing OK Renaming a marker To name a mark proceed as follows gt Use the arrow keys up down to mark a mark tag that you wish to give a new name gt Press the green function key Menu and use the arrow keys up down to mark of the line rename mark gt Confirm by pressing OK to open the virtual keyboard in order to enter a new name gt Use the yellow function key to alternate between upper and lower case letters gt Use the arrow keys to mark the first letter resp the first symbol or figure if the name you wish to enter gt Confirm this by pressing OK The selected letter will now be displayed in the headline of the virtual keyboard gt Now use the arrow keys to select the second letter of the name and confirm this by pressing OK gt If you have entered an incorrect letter or symbol by mistake you can delete this by pressing the red function key gt Enter the complete name in this way gt To accept the name press the green function key A message will be displayed enquiring whether you really want to accept the name gt Use the arrow keys to mark the field OK and accept the name by pressing OK gt To exit from the virtual keyboard without accepting the entered name press the blue function key Abort Deleting a section Your PVR provides the faci
2. 2 Satellite Scan Select this type of search to scan only a specific selected satellite for Programmes 3 Transponder Scan Select this type of search to scan a specific transponder of a single satellite for Programmes 4 Manual Scan Select this type of search to search specifically for one particular programme using the programme specific PID numbers When the search has been completed a message will appear on screen indicating how many programmes your digital receiver has found how many of these are new programmes and how many are encrypted Programmes New programmes are saved in the Total list and can then be transferred to the Favourites list in accordance with Point 9 1 gt To commence searching for programmes first call up the Main menu gt Use the arrow keys up down to mark the line Scan channels gt Confirm by pressing OK The sub menu Scan channels will be displayed gt Now use the arrow keys up down to select the type of scan you wish to perform and confirm by pressing OK 9 4 1 Automatic scan If this scan is selected all the satellites listed in the menu Antenna settings Point 6 4 and 10 4 will be scanned automatically for Programmes You can decide whether you wish to scan for all programmes free to air and encrypted or only for free to air Programmes gt By pressing the OK key decide whether you wish to scan only for free to air programmes Free programmes or whether you wish to include encrypt
3. gt Using the up down arrow keys subsequently mark the Search panel and confirm with OK The scan will be started Please also note Points 9 4 5 and 9 4 6 and the on screen messages 13 9 4 4 Manual search Should a programme not be found in the course of an automatic search a satellite search or a transponder search it may be necessary to enter additional programme specific PID numbers for this programme You will need to obtain these numbers on the Internet or possibly direct from the programme provider concerned The menu differs from the menu Transponder search only with regard to the menu items PCR PID Audio PID and Video PID There is no need to enter the search mode gt Proceed as described under Transponder search gt Then use the arrow keys up down to mark the lines PCR PID Audio PID and Video PID and use the numeric keys to enter the corresponding numbers gt Use the up down arrow keys to mark the Search panel and confirm with OK The scan will be started Please note any messages displayed on screen If no programme is found as a result of the PID search a query message will be displayed asking whether this programme should be generated gt If you wish to generate this programme use the arrow keys left right to select the field Yes and confirm by pressing OK The programme will now be generated and will be added at the end of the Favourites list 9 4 5 During the search While the search is still in
4. Back The newly found programmes are not added to the Favourites list and are retained only in the Total list gt Use the arrow keys left right to select the desired procedure gt Confirm by pressing OK Please note any messages displayed on screen gt Press the Menu key to return to normal operation Independently of whether you have transferred the newly found programmes to the Favourites list automatically these can at any time be added to the Favourites lists manually as described in Point 9 1 9 5 Service settings You can at any time access the factory default settings Also you can if the programme list has become obsolete through changes made by the programme providers delete the programme list completely and perform a new programme scan Please note that after performing the delete function you must first start a programme scan and must then transfer the desired programmes from the Total list to the Favourites list gt Use the Menu key to call up the Main menu gt Now use the arrow keys up down to mark the menu line Settings gt Confirm by pressing OK The sub menu Settings will be displayed gt Now use the arrow keys up down to mark the line Service settings gt Confirm by pressing OK The sub menu Service settings will be displayed 9 5 1 Activate factory default setting If this function is called up the factory default setting will be implemented personal settings will be deleted and the instal
5. In order for your receiver to check automatically whether a new programme list is available use the up down arrow keys to mark the line Update gt Switch the automatic programme list update on with the OK key ISIPRO channel If the parameters of the data channel required for downloading the ISIPRO have changed you can correct them in this menu as described under Point 9 4 4 manual programme search Current transponder data can be obtained from your retailer Generally under normal circumstances you should not make any changes in this menu Start availability test manually gt To check for the presence of a new programme list manually press the yellow function key Check If a new programme list is available a note will appear Start update gt To download the programme list use the up down arrow keys to mark the Start update field and confirm with OK Your receiver will then re start and will indicate the availability of a new programme list by displaying a message on screen 9 5 3 1 New programme list available When the receiver is switched on a new available programme list will be indicated to you by a corresponding message shown below 9 5 3 2 Decline programme list gt If you do not wish to download the new programme list press the red function key Reject The message will only be displayed again when an even more up to date programme list is transmitted 9 5 3 3 Update programme list automatically If
6. Now use the arrow keys up down to set the marker indicating the beginning of the section to be copied The section to be copied will now be indicated in red on the progress indicator as well as in the overview of existing markers 1 Now press the green function key Menu and use the arrow keys up down to mark the line extract section Press OK to display a query window To actually copy the section use the arrow keys left right to mark the field OK and confirm by pressing OK The marked section will now be copied to a new recording Depending on the size of the section this may take several minutes Splitting a recording This function allows you where for instance two successive programmes were recorded as a single recording to split these into two individual recordings Each recording will be split at the point indicated by the relevant markers Recordings can be split as follows gt Set a marker at the beginning of the section to be separated as described under set marker Now use the arrow keys up down to mark the marker from which the total recording is to be split Now press the green function key Menu and use the arrow keys up down to mark the line split recording Press OK to display a query window This will show information relating to the two recordings to be created by the split To actually split the recording use the arrow keys left right to mark the field OK and confirm by pressing OK Renaming
7. Press the OK key The active programme list will be displayed gt Now with the assistance of the option key you can open a window with the types of programme lists TV lists TV provider lists and overall TV lists The active programme list type is marked gt Use the arrow keys up down to select e g the programme list type Total list and confirm by pressing OK The alphabetically sorted Total list containing all programmes will be displayed gt Use the arrow keys up down to mark the programme you wish to view gt You can get additional information on the current programme by pressing the INFO key gt Confirm by pressing OK or gt Press the green function key PVR to go direct to the hard drive navigator 7 2 4 Calling up blocked programmes If a programme is selected that is blocked by the parental control function the message Unit PIN will be displayed on screen gt Use the numeric keys to enter your PIN code The desired programme can now be viewed or gt Switch to a programme that is not blocked If you have selected the setting Once under Point 9 3 1 the system will call for the PIN code once when a blocked programme is selected Thus in order to make operation more comfortable for you you need to enter the PIN code only once during each viewing session 7 2 5 Infobox Each time you change programmes an information box will be displayed briefly showing the programme slot and the programme n
8. and Volume to decrease it gt To switch the sound off mute press the key Sound on off press the key again to switch the sound on again Please note The volume of the digital audio outputs cannot be adjusted 7 5 Selecting a different language If a programme is being broadcast in several languages or with several audio channels this will be indicated by a message displayed on screen You can then proceed to set a different language or another audio channel as follows gt Press the key Language selection A list indicating the languages currently being broadcast will appear on the screen gt Use the arrow keys up down to mark the desired language and confirm by pressing OK You can now proceed to listen to the programme in the language selected Your digital receiver is also capable of receiving mono Programmes gt Use the arrow keys left right to select Mono channel 1 Mono channel 2 G2 or Stereo lee 7 5 1 Dolby Digital If a programme is being broadcast in Dolby Digital Sound this will be indicated when you switch to the programme as the Dolby logo will be displayed in the Infobox Provided you have enabled the Dolby Digital function in accordance with Point 6 3 6 the programme will automatically be reproduced in this sound format If you have not turned on the Dolby Digital function then proceed as follows for manual Dolby Digital of your appliance gt Press the key Language select If any are
9. available gt Use the arrow keys up down to mark the line Copy and confirm by pressing OK gt To copy the marked file resp the marked folder now press the yellow function key Copy The marked file resp the folder will now be copied and the name will then also appear in the left hand resp right hand column of the menu Marking blocks To mark several files simultaneously proceed as follows gt Press the Press the OK key to go to the selection mode The marked file will be indicated by a cross on the left hand side gt You can now use the arrow keys up down to also mark the preceding or the following files gt Once you have completed marking the desired files in this manner press the yellow function key Copy to copy the marked files on to the hard drive Please note that it is not possible to mark blocks of folders only files 8 3 2 2 Moving The Moving function allows you to move or shift the marked file resp the marked folder from the source medium e g the USB device to the target medium e g the hard drive At the end of this procedure the file or folder that has been moved will be present only on the target medium and will be deleted from the source medium gt Use the red function key Set Top Box or the green function key USB devices to go to the source on which the file or folder to be moved is currently stored gt Use the arrow keys up down to mark the file or the folder you wish to move gt
10. gt While in playback mode press the key Jogshuttle on off Freeze frame to go to the jog shuttle mode The playback of the recording will be stopped freeze frame pause The symbol PII will be displayed Slow motion gt Press the arrow key right to view the recording in slow motion speed The symbol IB will be displayed Single frame progress gt Press the up arrow key or the down arrow key to display the next frame in a forward direction or backward reverse direction respectively Fast forward and rewind gt Press the arrow keys left right repeatedly to change the speed and the direction of the playback The various playback modes will be displayed as indicated in the table below 48 gt Display Playback mode gt Playback gt gt Fast forward 4 speed gt gt gt Fast forward 16 speed gt gt gt Fast forward 64 speed d4 Rewind 4 speed d14 Rewind 16 speed 1414 Rewind 64 speed i gt Slow motion Pil Pause Press the right or the left arrow key while PP or 4444 is displayed in order to skip forward or back by 10 minutes Create Picture gt Press the Record key to store a single picture on the hard drive You can call up pictures created in this way as described under Point 8 2 3 and manage them as described under Point 8 3 2 To avoid picture errors distortions the picture should be taken from a freeze frame while PII is displayed 8 2 1 5 Setti
11. Accept to store the changes made and to return to the menu Settings alternatively gt Press the red function key Back A query then appears gt If you wish to accept the changes use the arrow keys left right to click on the field Yes and confirm by pressing OK You will now return to the previous menu gt Press the TV Radio key to return to normal operation Settings will not be saved 6 3 Picture settings To optimise your digital receiver onto you TV set you can undertake further settings in the Menu Picture Settings gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Settings gt Confirm by pressing OK The sub menu Settings will be displayed 19 gt Now using the up down arrow keys mark the line Picture Settings gt Confirm by pressing OK The Menu Picture settings will appear gt Use the arrow keys up down to move the marker within the menu and to change the individual positions as indicated When selecting a menu item please also note any messages displayed on screen The following settings adjustments can be made 6 3 1 Picture format gt Use the arrow keys left right to set the picture format of your TV set appropriately to 4 3 or 16 9 This function automatically adjusts the picture format to that of your television set 6 3 2 HDMI resolution gt By pressing the OK key a window opens showing the resolutions available gt Use the up dow
12. Mbaud s SCPC MCPC DVB S2 10 31 Mbaud s 8PSK 10 30 Mbaud s QPSK 2 SAT Front End without DVB S2 Input frequency range Demodulation Symbolrate Input level range DBS tuner input Input impedance Loop Through AFC capture range DVB S FEC DVB S Viterbiraten Roll off Factor Demultiplexing Common Interface Type Power consumption max Card reader Typ Video decoding Video compression Video format Compressions Mode Scaling Video standard Picture format control Conversion 16 9 gt 4 3 Simultaneous Video Scaling onto SCART jack 950 2150 MHz DVB S QPSK DVB S 2 45 Mbaud s SCPC MCPC 65 dBm 25 dBm 2 X F socket 75 Ohms internal Loop Trough 3 MHz Viterbi and Reed Solomon 1 2 2 3 3 4 5 6 7 8 automatic alignment K 7 35 96 in accordance with ISO 13818 1 2 Common Interface slots for CI modules max 0 3A 5V 2 Slot card reader for integrated CA system MPEG 2 up to MP ML and MP HL MPEG 4 H 264 up to High Profile Level 4 JPEG decoding HDTV 1080150 1920x1080 25i 16 9 H264 MPEG 2 HDTV 750p50 1280x720 50p 16 9 H 264 MPEG 2 SDTV 576150 720x576 25i 4 3 16 9 MPEG 2 576150 inc 704 544 480 352 Pixel per line 1080 50 gt 1080150 720p50 720p50 gt 1080150 720p50 57 6150 gt 1080150 720p50 576p50 576150 PAL automatic Letterbox filtering Pan amp Scan HDTV 25 50 Hz format 5 SDTV 5761 50 86 Audio decoding Audio c
13. Using the numeric keys gt Use the numeric keys to enter the desired programme number For example 1 for programme 1 1 then4 for programme 14 2 then 3 then 4 for programme 234 1 then 5 then6 then 7 for programme 1567 When entering programme numbers with several digits you have approx three seconds time after pressing a key to complete the entry If you wish to enter a number consisting of only one two or three digits you can speed up the entry procedure by keeping the key depressed a little longer on the last digit Using the programme list gt Press the OK key gt Now use the arrow keys up down to mark the desired programme gt Press the OK key and the marked programme will be selected gt Use the arrow keys up down to move around the list one line at a time gt Use the left right arrow keys to move through the list one page at a time Volume control gt To adjust the volume of your digital receiver press Volume to increase the volume and Volume to decrease it Switching sound on off gt Press the Sound on off key to switch the sound on or off 22335600000200 92
14. W 24 W 40 W RC 5 8 SAT 1 10 SAT 2 36 kHz 950 nm internal switching power supply in standby mode standby LED in standby mode standby clock operation without LNB supply without hard drive in recording mode at 2x 400mA LNB current connected USB device and 2 inserted CI modules not valid during the EPG updating Software updating Nominal voltage Input voltage General Dimensions WxDxH Weight 230 V 50 Hz alternating voltage 180 V 250 V 50 Hz alternating voltage 3 0 mm x 220 mm x 65 mm approx 2 7 kg 89 13 Troubleshooting guide Various programmes not shown in Wrong programme list selected the programme list Select different programme list see Point 7 2 3 1 Sound OK no TV picture Radio mode switched on Switch to TV mode Programmes such as DSF and Tele 5 show occasional interference Receiver cannot be operated Remote control not working Intermittent appearance of square blocks in the picture Occasionally switches to freeze frame no sound Screen intermittently black with No signal message No picture no sound display on Interference from DECT cordless telephones Defective data stream gt unit blocked Batteries are spent Increase distance between base station and receiver Pull out mains plug for approx 5 seconds then switch the unit back on Replace batteries Wrong remote control code set Heavy rain or snow Set cor
15. a recording Your PVR extracts information on the name of each programme broadcast from the broadcast data stream If a recording includes several programmes all the names of the recorded programmes will be noted and recorded internally To rename a recording proceed as follows gt Press the green function key Menu and use the arrow keys up down to mark the line Rename recording Confirm by pressing OK A list with the available titles will be displayed Use the arrow keys up down to select the title you wish to use and confirm by pressing OK A query will be displayed Use the arrow keys left right to mark the field OK and confirm by pressing OK 59 gt If you wish to give the recording a different specific name then use the arrow keys up down to mark the line New gt If you press the OK key the virtual keyboard will be displayed and you can enter a new name as described under Renaming a mark Enlarging a video To make it easier getting to a specific point on a recording you can enlarge the video picture of the recording gt Press the green function key Menu and use the arrow keys up down to mark the line Enlarge video gt Confirm by pressing OK to display the video picture in larger format gt To again reduce the size of the video picture proceed as above and mark the line Reduce video 8 3 2 Managing music pictures As described in Point 8 2 2 and 8 2 3 you can use your receiver to play mu
16. being broadcast a list of the currently broadcast languages as well as Dolby Digital AC 3 will be displayed on screen gt Use the up down arrow keys to mark the line Dolby Digital gt Confirm by pressing OK You can now listen to the programme in Dolby Digital sound If you want your appliance to automatically reproduce programmes in Dolby Digital then set you appliance as described under point 6 3 6 for automatic Dolby Digital reproduction 7 6 TV Radio switching The pre programming includes both TV and radio Programmes 31 gt Use the TV Radio key to switch the digital receiver to radio mode The receiver will now switch to the last radio programme previously selected gt Press the TV Radio key again to return to the last television programme previously selected 7 7 Return to last programme previously selected gt Press the Back key on the remote control to return to the last programme previously selected gt Press the key again to return to the programme previously selected 7 8 Display clock and programme information This function allows you to view programme information relating to the programme currently selected gt Press the Info key to display information for the currently selected programme A display will appear on the lower half of the screen showing the current time the name of the programme selected the name of the current programme together with its start and stop times whenever this in
17. calling up the main menu or when selecting a blocked channel resp a blocked hard drive recording To make matters more convenient for you you will be asked for the PIN only once in each operating cycle 9 3 2 Changing the PIN The unit PIN code is set to 0000 at the factory gt Press the OK key The menu for changing the unit PIN code will be displayed 70 Now use the numeric keys to enter the current unit PIN code in the line Unit PIN factory setting 0000 In the line Enter new PIN use the numeric keys to enter the desired new unit PIN code Repeat the entry in the line Repeat new PIN When you have completed changing the PIN code in this manner you will be taken back automatically to the menu Parental control Note Ensure that you do not forget the unit PIN code If this does happen please consult your retailer 9 3 3 Selecting TV channels programmes gt Press the OK key The TV Main Favourites list will be displayed The programme currently selected is marked Press the red function key to open a selection window Here you have the option of selecting the desired programme list type You have the option of selecting the desired programme list type You can also select on of the various Favourites lists Refer also to Points 6 6 1 and 9 1 2 Using the up down arrow keys select the type of programme list e g favourites lists Confirm by pressing OK The option of various Favourites lists was activated un
18. enter the satellite on which the desired transponder is located gt Use the arrow keys up down to mark the line Satellite gt Press the OK to display a table showing the active satellites selected in accordance with Points 6 4 and 10 4 gt Now use the arrow keys up down to mark the desired satellite gt Confirm by pressing OK The selected satellite will now be shown in the line Satellite Transponder frequency gt Use the arrow keys up down to mark the line Transponder frequency gt Use the numeric keys to enter the desired frequency in this line Symbol rate The symbol rate indicates the volume of data transmitted per second This figure could be shown as for example 27500 27500 symbols per second gt Use the arrow keys up down to mark the line Symbol rate gt Use the numeric keys to enter the symbol rate Polarisation gt Use the arrow keys up down to mark the line Polarisation gt In this line use the OK key to enter the polarisation plane horizontal or vertical on which the desired transponder is broadcast The signal strength and the signal quality of the transponder selected will be shown graphically at the bottom of the screen Search mode gt Use the arrow keys up down to mark the line Search mode gt By pressing the OK key decide whether you wish to scan only for free to air programmes Free programmes or whether you wish to include encrypted programmes in the search All programmes
19. indicated in the blue field 7 12 2 1 Subpage display Many Videotext pages consist of several subpages This is indicated in the Videotext picture by two numbers separated by a forward slash current subpage number of subpages As soon as a new subpage becomes available it is automatically displayed gt To display a particular subpage press the OK key The column at the left hand edge of the screen will become active The already downloaded subpages will be displayed gt Use the up down arrow keys to select the desired subpage gt Press the OK key to display the specific subpages 7 12 2 2 Stop mode gt Press the Freeze frame key and the message Stop will be displayed in the upper left corner of the videotext window This will prevent automatic continuous paging through the videotext subpages gt Press the Freeze frame key again to switch the stop mode off again 7 12 2 3 Exit Videotext gt Press the Back key to return to normal operating mode 33 mg 7 13 Subtitles Where subtitles are broadcast this will be indicated by the message Subtitle select If you have switched on the function Subtitles as per Point 6 4 2 these will be displayed automatically provided that they are being broadcast in the language selected If subtitles are being broadcast only in other languages or are broadcast via videotext you can switch these on manually as follows gt Press the Option key if necessary several tim
20. interface RS 292 cxswenErkx E te d ewd idm we ne FUE Ren RR RON EORR EON do 14 4o USB SOCKEL oc espe deeb se ose ote fo eee Sos eee 4 oboe eee E eos tesa neds 14 5 Initial installation 1 2 ee aaa thm 15 O SONOS uiua te 43 433A hese GANA ween OCCUR GAAN WG MINA e ca UR 18 6 1 Operating language a aaa a Rent NG oa oak 054 eee be aes ADA Eka dE EA 18 oA PAA AA ee 18 SPA NO pasasaan ha KNA a NIN eee eee AKA ee eee eee E E 18 oak Vie ue PAA he Be Ae Hehe ean eee 18 0 2 9 Date NOU AA 19 6 24 Standby ClOCK c sro PANIG oe ales eee dew e XE Sax GERE PE ee ewe een Ss 19 6 2 5 Remote control code es a der x EG dd S PR EE Son Rhe ocR ds ewh etadebaese deta 19 DUCK AN 22 dea ee aeee es ed oe oak LAGA sue enue eee eee ee ewes Sess oe8 iss 19 Sesame EP gd Ge doe eo es be ee ah eee a a ee ee ee 19 64 Sound Settings s uoce 2E RUE PER et Sen OS eom dee ede ene See bee eee ee ee eee aes 20 6 5 Antenna adjustment and settings 0 0 c cee ee ees 21 COMMUNI ama an TEE TT I ETT T COT TITT C IKAN NA ea ee be ean LAG 22 0 5 2 Switching DiSEqC on and ON cus xau hREU E RE EE AG ceeds coer E XU E e aes 22 6 5 3 Antenna ar ce eee an KN eee odora dS oe ae eae ee ake nee eee ee 22 6 5 4 Setting the switching matrix 0 0 ce eee eee ene 23 6 5 5 Additional settings LNB properties 0 0 0 0 cc eee 24 6 5 6 Rotating antenna naa tee See oe oe eee eee Bee a ead edn 25 6 6 Special TUNCHOUS AA ieee Faye eee een es 25 6 6 1
21. list and confirm with OK Using the up down arrow keys to select from the list the picture file which you want to include in the playlist Press the green function key PLS to add the picture file to the playlist Using the up down arrow keys mark a file which contains the picture file and press the green function key PLS to include the complete contents of the file in the playlist In this way you can put together a playlist exactly according to your own wishes Replay lists gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key NAV Menu a further window will be opened gt Use the up down arrow keys to mark the line Pictures and confirm with OK gt Use the arrow keys up down to select the source from which you wish to view the picture files and confirm by pressing OK A list showing the picture files available on the hard drive or on the USB device will be displayed These are indicated by the symbol 16 Folders located on the hard drive resp on the USB device will be indicated by the symbol cu gt In order to change to the replay viewport press the option key and using the up down arrow keys mark the line Replay lists gt Confirm by pressing OK Now all playlists contained in the storage medium will be displayed gt Now using the up down arrow keys mark the playlist which you want to see and confirm with OK How to delete pictures fro
22. mark several programmes simultaneously proceed as follows gt Press the OK key to go to the selection mode The marked programme will be indicated by a cross on the left hand side You can now use the arrow keys up down to also mark the following or the preceding programmes as well When you have completed marking the desired programmes in this manner press the yellow function key Add to add the marked programmes to the Favourites list 9 1 5 Deleting programmes 9 1 5 1 Removing deleting from the Favourites list To remove programmes from the Favourites list call up the programme list manager as described in Point 9 1 1 Where appropriate you must still select the desired Favourites list gt Press the blue function key Functions A selection window will be displayed listing the available functions Use the arrow keys up down to mark the line Remove Confirm by pressing OK Use the arrow keys up down to mark a programme you wish to remove from the list Press the yellow function key Remove 66 gt To remove several programmes simultaneously mark these as described in Point 9 1 4 Marking blocks gt When you have completed marking the desired programmes in this manner press the yellow function key Remove The programmes removed in this manner remain included in the Total list and can be transferred back to the Favourites list at any time 9 1 5 2 Deleting from the Total list To remove programmes from
23. not taken into consideration as they do not affect the first decimal place 81 Example Co ordinates of Daun Germany Deg latitude 50 11 45 N Deg longitude 06 50 10 Converting the degrees latitude DL DL 50 11 60 DL 50 0 2 rounded DL 50 2 In the menu used for entering the geographical latitude enter the value rounded to one decimal place 50 2 The decimal value of the degrees longitude is calculated in the same way 10 3 Setting a satellite position For each satellite position to be added consecutively work through Points 10 3 1 to 10 3 3 When programming satellite positions we recommend you start with the satellite that has the most Easterly orbital position Continue by adding the other satellites working your way through in a Westerly direction until you have reached the satellite with the most Westerly orbital position Your digital receiver is pre programmed at the factory for the most popular satellite positions In addition you can configure user defined satellite positions User 1 to User 13 for any orbital position desired 10 3 1 Selecting a satellite position 10 3 1 1 Selecting a pre programmed satellite position gt To add a satellite position to the satellite list use the arrow keys to mark the field Sat new gt Confirm by pressing OK A list of the available satellite positions will be displayed gt Now use the arrow keys up down to mark a satellite position you wi
24. progress you can follow the scanning of transponders on your screen The following are shown The satellite currently being scanned 1 the number of programmes found so far 2 the transponder last scanned 3 the last programmes found 4 the progress of the entire scan 5 and the transponder of the satellite currently being scanned 6 gt You can press the red function key to abort the search 9 4 6 After the search When the search has been completed a message will appear on screen indicating how many programmes your digital receiver has found how many of these are new programmes and how many are encrypted Programmes In addition a query will be displayed asking whether you wish to sort the programmes found into the TV or radio list automatically or whether you want them to be added automatically at the end of the list or whether you wish to sort them manually Automatic sorting The programmes found will be sorted into the Main Favourites list in accordance with a pre programmed list The order of the programmes is determined by the audio language selected in Point 6 3 2 resp by the country selected in Point 6 2 2 Automatic addition The newly found programmes are added to the end of the Main Favourites list in unsorted order Manual sorting TV manual sorting radio Here you will go direct to the menu Manage TV lists red Manage radio lists Edit these lists as described under Point 9 1 of the operating manual 74
25. receiver Connection between the audio outputs and a hifi system 12 The references a b c etc mentioned below relate to the illustration on page 12 4 4 Mains power connection The digital receiver should only be connected to the mains power supply when all the cable connections with other components of the system have been made This helps to avoid damage to the digital receiver as well as to other components a When you have made all the other connections use the mains cable supplied to connect the receiver to a mains power outlet 230 V 50 60 Hz 4 2 External unit 4 2 1 Operation with 2 antenna signals To utilise the full range of functions of your digital receiver you should preferably operate it with two separate antenna signals b c Use suitable co axial cables to connect the LNB inputs 1 and 2 of the digital receiver with your external unit Please also note Point 6 4 antenna settings 4 2 2 Operation with 1 antenna signal In exceptional cases you can also operate your receiver with only a single antenna signal In this case however both the recording function and the PIP function will only be available in restricted form see point 6 4 2 b Use a suitable co axial cable to connect the LNB input 1 of the digital receiver with your external unit 4 2 3 Operation with a rotating antenna b When using a rotating antenna connect the DiSEqC motor Level 1 2 with the LNB input 1 4 3 Connection to a tel
26. red function key Set Top Box or the green function key USB devices to switch to the source on which the file is located that you wish to sample resp to show Use the arrow keys up down to mark the file you wish to sample Press the blue function key Functions to open a window showing the functions available Use the arrow keys up down to mark the line Sample resp Show and confirm by pressing OK Press the yellow function key The marked file will now be played as a sample resp shown 8 3 3 Copying recordings This function allows you to export recordings from the internal hard drive to an external USB device e g another hard drive gt gt gt Call up the menu Manage hard drive as described in Point 8 3 Use the arrow keys up down to mark the line Copy recordings Confirm by pressing OK The menu Copy recordings will be displayed On the left half of the screen you can see the recordings available on the internal hard drive The right half of the screen shows the contents of the USB device 8 3 3 1 Exporting The Export function creates a copy of the marked file on the USB device The original file remains intact gt gt Use the arrow keys up down to mark the file you wish to copy to the USB device Press the blue function key Functions to open a window showing the functions available 62 Use the arrow keys up down to mark the line Export and confirm by pressing OK To copy the marked file y
27. run time for the timer in steps of one minute at a time The timer will then start earlier and end later than given in the EPGplus data by the entered pre run and post run times gt Press the red function key Timer to open a selection window gt Use the arrow keys up down to mark the line Timer settings gt Confirm by pressing OK A menu will be displayed allowing you to enter the pre and post run times gt Now use the arrow keys up down to mark the line Timer pre run time and Timer post run time gt Use the numeric keys to enter the desired pre or post run time in minutes gt Press the green function key Accept to save the setting and return to the previous EPGplus table 7 16 7 3 EPGplus programme overview You can use the EPGplus programme overview to display a table with the whole day s listings for an individual channel Proceed as follows gt Press the EPG key If you have selected the start category Overview see Point 9 2 3 the Now EPGplus table will appear gt While the Now EPOplus table is displayed press the green function key to switch directly to the channel listings or gt press the blue function key EPG Menu gt In the selection window use the arrow keys up down to mark the line Programmes gt Confirm by pressing OK The day s overview of the selected channel will now be displayed gt You can use the arrow keys to move the marker to the desired programme or time The ind
28. such no 16 9 symbol in the Infobox see Point 7 2 5 Important prerequisites for this zoom function are however that the digital receiver is set to 16 9 operation according to Point 6 3 1 and your television set supports 16 9 signalisation over the scart socket gt First press the Option key Sound selection will appear on the screen gt With repeated pressure on the blue zoom function key various zoom factors can be set gt Exit Sound selection by pressing the Back key gt Proceed in the same way to switch Zoom off The zoom function stays switched on until you switch it off again or switch the unit to standby 7 16 EPGplus Electronic Programme Guide Your digital receiver features an electronic programme guide This allows you to display programme information related to one or more programmes on your screen You can very quickly obtain an overview of the currently running programmes the programmes of the day or those of the following days 35 The EPGplus functions allow you to display information on programme contents on the screen display preview pictures of individual programmes mark specific programmes that will then be automatically switched on when the programme begins programme timers search for and select programmes by type of programme genre 7 16 1 Downloading EPGplus data The programme information will be updated automatically by your receiver at the preselected updating time Point
29. the Videotext is forwarded to your television set To operate the videotext options you must use the remote control of your television set If there should be any problems related to the display on your television screen such as an overlapping of videotext contents and picture you should set your digital receiver to FBAS mode Point 6 3 4 7 12 2 Using the internal videotext decoder As an alternative you can also use the integrated TOP videotext decoder to display the information When using TOP videotext all text pages are split thematically into groups and blocks which makes the videotext more readable gt Switch to the channel for which you wish to see the videotext information gt Switch Videotext on by pressing the Videotext key gt Use the numeric keys to enter the desired videotext page Your entry will be displayed in the upper left hand corner of the screen Once you have entered the desired videotext page the receiver will search for the page As not all videotext pages can be transmitted simultaneously it may take a few seconds for your receiver to find the page and display it on the television screen All providers of videotext information use page 100 as their starting page gt Use the red or the green key to move forward or backward one page at a time gt Press the yellow function key to call up the videotext group indicated in the yellow field gt Press the blue function key to call up the videotext block
30. using the numeric keys gt To accept the programme displayed at the selected position of the Favourites list press the green function key to select Yes Tf Accept all programmes gt To accept and transfer all new programmes without a further check press the yellow function key Automatic The programmes will be added to the Favourites list in accordance with predetermined criteria Reject programme do not accept gt If you do not wish to accept the indicated programme and all the following programmes into the Main Favourites list press the red function key No 9 5 4 Updating software In addition you have the facility of updating the operating software of your digital receiver via satellite ASTRA 19 East gt Use the arrow keys up down to mark the line Update software gt Press the OK key to go to the Software update submenu gt To perform a software update use the up down arrow keys to mark the line Update gt Use the OK key to set the software update to on gt In the line Update time use the numeric keys to set the time at which the software is to be updated Note For the new software to be loaded automatically the digital receiver must be set to standby mode The downloading procedure will be indicated by the message Update S as well as the percentage of data already downloaded Do not interrupt this procedure by switching the receiver on or off Software channel If the parameters
31. valid Smartcard for this programme is inserted in the slot Special functions Certain special functions are offered on specific programme slots e g Premiere reception only with a valid subscription For instance multi feed channels allow you to select various games in the sports category i e different National League games in Germany or you might be able to select different commentary tracks e g stadium broadcast or in some cases different camera viewing angles may be available e g Formula 1 racing In addition on some channels you may be able to select the starting time of a movie you have ordered Please also note Point 7 16 7 2 7 3 1 Option channels Some programmes provide the opportunity of using so called option channels This function allows you for instance to select different camera perspectives in the case of a sports event Formula 1 or to switch to different sporting venues National League football in Germany If a programme has option channels this will be indicated by a note gt To select one of the available options press the key Option A selection window will be displayed showing the various options available gt Use the arrow keys up down to select the desired option gt Confirm by pressing OK 7 3 2 Selecting a starting time On some channels you have the option of selecting various starting times for viewing specific movies These movies can thus be viewed around the clock at specific
32. yellow function key or the Freeze frame key while the playback is in progress The message Pause Pll will be displayed gt Press the respective key again to continue playback from the same spot 8 2 1 3 Fast forward and rewind To allow you to go to a specific point in a recording your PVR provides fast forward and fast rewind functions gt While in Play mode press the blue function key Fast forward or the red function key Rewind The message Fast forward BP or Rewind lt lt will be displayed briefly The recording will now be played at 4 times speed in the desired direction gt If you press the blue or red function key again the speed will be increased to 16 times The message Fast forward PBB or Rewind 44 will appear briefly gt If you press the blue or red function keys yet again the running speed will be increased to 64 times The message Fast forward gt gt gt P gt or Rewind 444 0 will appear briefly gt By pressing the blue resp red function key once more you can scan forward or backward through the recording in steps of 10 minutes gt Once you have reached the desired spot in the recording press the yellow function key to go to normal viewing playback mode 8 2 1 4 Jogshuttle function In addition your receiver features a so called jog shuttle function which allows you to go to a specific place in your recording very quickly and precisely This can be used as follows
33. you really want to delete this Timer gt Use the arrow keys left right to select Yes gt To delete the Timer entry confirm by pressing OK 8 1 2 5 Programming a new Timer event gt To programme a new Timer event use the arrow keys up down to mark a free line in the menu Timer overview 45 gt Press the green function key New to go to the entry window for programming a new timer event Now make your settings here in accordance with Point 8 1 2 1 gt Use the arrow keys up down to mark the additional field Type displayed gt Confirm by pressing OK A window will be opened listing the Timer types available gt Use the arrow keys up down to select the desired Timer type gt To accept the Timer type confirm by pressing OK gt When you have completed the programming press the green function key Accept to transfer the data to memory Note Ensure that the receiver has acquired the correct time This is shown in the display while the receiver is in standby mode If this is not the case switch the receiver to a major channel such as ZDF etc for approx 30 seconds to acquire the time 8 1 3 Timeshift function The time shift function provides the facility of recording and playing back at the same time This is made possible by Time Shift television Thus you can already view the beginning of the recording and can decide to skip over certain passages already recorded e g advert breaks The live signal
34. 9 2 2 provided the receiver is in standby mode at the time The downloading procedure will be indicated by the message Load EPG appearing in the display The unit switches itself on at the preselected updating time in order to load the EPGplus data from the EPG channel data stream The downloading process is indicated by Loading EPG in the display If your unit is not in use at the time this function will not be carried out You can also start the download process manually directly after switching off while the display is displaying Load EPG by pressing the EPG key Load EPG appears in the display during the download process as well as the percentage of EPGplus data already downloaded e g 3896 The duration of the download process depends on the number of programmes to be downloaded A maximum of seven days in advance can be displayed As more programmes are added to the electronic programme guide the volume of data increases and the preview period is reduced correspondingly It is up to you to decide which programmes should be listed in the electronic programme guide These can be selected as described in Points 9 2 5 and 9 2 6 7 16 2 Interrupting the download procedure The downloading procedure can be interrupted by switching on the digital receiver On Standby key The EPGplus data from the last update are then available 7 16 3 Calling up the Electronic Programme Guide gt Press the EPG key on the remote control of the digita
35. G ees 64 8 3 5 Hard drive maintenance 3 cuties xeu E deua KAMAHAL bed Ec unde cee Kala KA 64 9 Changing basic programming 0000n eee ee 65 9 1 Configuring the Favourites list nanana aaaea 65 9 1 1 Calling up the programme list manager eee ees 65 9 1 2 Selecting Favourites list 2 84 awa ies ke RRREREER PEE ERE RYE GR 65 ME Eod rq rM 65 9 1 4 Adding programmes to the Favourites list 00 0a 66 9 1 5 Deleting programmes osa anc a icm im aad mai Bodo d cbe Re o RC dom ESI c 66 9 1 6 Sorting programmes 020 Kk cese da tawheue hana BKA Edad e DULA GG ERA 67 9 2 Programming the electronic programme guide 2 0000 eee 68 92 Nae cengar ek Aa NG ad hano KPA ANG TITIO LC ee wee a eae eo eee cee 68 922 Updating UNG saa de 2b ewe eek CO KALA NG a PAGA oe NO Oe eee ee ee are 68 9 23 Start Odile TOP 2 ogc ous he ose ee as wee ees BOGA bbe ae UE Ede eo ee 68 2 Illustrations Remote control On Standby Option in TV mode select sound subtitles Sound on off special functions in radio mode stations by switching the sound sub carriers red rewind I green PVR Navigator I Stop ellowPause playback blue fast forward OK Programme list on off Right arrow key Numeric keys O AV Record Multifunctional keys Up arrow key Programme Left arrow key Volume Volume Down arrow key Volume EPG Menu on of
36. In addition a yellow progress bar 3 will be displayed showing the current playback position and the total duration of the recording gt To skip to a marked spot of the recording use the arrow keys up down to mark the desired marker and confirm by pressing OK Going to any spot of the recording gt Use the coloured keys to go directly to various spots of your choice in the recording Functions gt Press the green function key Menu to open a window showing the functions available for editing the recordings gt Use the arrow keys up down to select the desired function and confirm by pressing OK Setting a marker gt Go as described above to the spot in your recording at which you would like to insert a marker gt Press the green function key Menu to open a window showing the functions available gt Use the arrow keys up down to mark the line Set marker gt Press the OK to set a marker at this spot of the recording Deleting a marker gt Use the arrow keys up down to mark a marker you wish to delete gt Press the green function key Menu to open a window showing the functions available gt Use the arrow keys up down to mark the line Delete marker gt Confirm by pressing OK to delete the marker Skip to marker You can simply press a key to jump to a spot or spots in the recording that you have previously marked with a tag gt Use the arrow keys up down to select a mark to which you wish to jump
37. NE Su Ges sad ur E 40 8 Hard drive operation 00000 eee 41 Eres PPP 41 6 1 1 Instant recording es sc ecesas KG NAA eae ea ee NAG he add eee HARAGAN 42 6 1 2 nmu dieico T r 43 8 1 2 1 Manual programming of timer 0 a 44 51 52 Tier OVelVIBU us ud dd inks 25909 Od ACE X Yc isos K EN anipe ina bald OM CREE RUN Ded AUR 2 45 9 1 2 9 Changing Timer programming 20 264 maka ERA KE ds AKDA de dven es EE 45 8 1 2 4 Delete Timer programming 3329 eh KAMA ha tok bA KAWA oe RR OX RR KAKAW 45 8 1 2 5 How to programme new event timer naaa aa 46 81 3 TIMES FUNCION 46 8 1 3 Timeshift Funktion 0 a 47 8 1 4 Setting markers while recording cece eee eee eee tenes 47 Mu ap 47 8 2 1 Playing back TecoOrdil tS 5 22 3 5 9d a Ro dicioni dic cg deh o9 DUX eee NGA te 47 8 2 1 1 Reproducing hard drive recordings aa 47 9 2 1 2 Pause Freeze frame aan nm dne xcR RR E Roe PAA XX XO BAN RA DAGA WAN betas 48 8 2 1 3 Fast forward and rewind 43s ux urea ose DE m bedae ded shes RUE RR ara dx 48 O ma dee NUNG TUMCHON s RET EET ETT CO TR em ee oe Ree ee woe ee 48 8 2 1 5 Setting markers a 49 8 2 1 6 Jumping to TMAIKOl eS a ido tae NG hot oe ORES Ee OEE Oe GA a ed ho a 49 8 2 1 7 End playback SESSION 4 5 3 d d x2 E AKA Galea diede xni ed Ka DEI ee eee eed 50 Di PINO DIY ACK 4 na era tah GG DAD GG NG AK ee MAGA ae ae as eh ee a A 50 8 2 2 1 Scr
38. PIN code before the data can be entered into memory gt Press the TV Radio key to return to normal operation 8 1 2 2 Timer overview The Timer overview function gives you an overview of all Timer events programmed gt To go to the menu Timer overview call up the menu Manage Timer as described above gt Use the arrow keys up down to mark the line Timer overview gt Confirm by pressing OK Should there by any overlapping in the programming of multiple Timer events so that these timers cannot be executed correctly these overlaps will be indicated in red 8 1 2 3 Changing Timer programming gt To change an existing Timer setting use the arrow keys up down to mark the Timer event you wish to change gt Press the green function key Change to go to the settings of the marked timer Proceed to change these as described under Point 8 1 2 1 gt Use the arrow keys up down to mark the additional field Type displayed gt Confirm by pressing OK A window will be opened listing the Timer types available gt Use the arrow keys up down to select the desired Timer type gt To accept the Timer type confirm by pressing OK gt When you have completed the programming press the green function key Accept to store the data in memory 8 1 2 4 Delete Timer programming gt Use the arrow keys up down to delete an existing Timer setting gt Press the yellow function key Delete A query message will be displayed Do
39. Press the blue function key Functions to open a window showing the available functions gt Use the arrow keys up down to mark the line Move and confirm by pressing OK gt To move the marked file resp the marked folder now press the yellow function key Move gt To move several files simultaneously mark these as described in Marking blocks above 8 3 2 3 Delete To delete files resp folders proceed as follows gt Use the red function key Set Top Box or the green function key USB devices to switch to the source on which the file or folder to be deleted is located 61 Use the arrow keys up down to mark the file or folder you wish to delete Press the blue function key Functions to open a window showing the functions available Use the arrow keys up down to mark the line Delete and confirm by pressing OK To delete the marked file resp the marked folder you must now press the yellow function key Delete A query message will be displayed asking whether you really wish to delete the selected files Use the arrow keys left right to mark the field Yes and confirm by pressing OK The data will now be deleted To delete several files simultaneously mark these as described in Marking blocks above 8 3 2 4 Sampling MP3 files showing picture files The function sample resp show is available in this menu in order to sample an MP3file resp to show a JPG file This function can be called up as follows gt Use the
40. Several Favourites lists 2 05 65200hee eben umasa maa heheh dees bews 25 6 6 2 Display time Information Banner 4 24 hore NG ANG eho seat eas 26 6 6 3 Cl dual decoding AAP 26 6 6 4 Radio background image os a Goin ot ndm Dog eee ee do eS ee ee 26 6 6 5 Memory format radio recordings 0 0 cece eee ee eee tenes 26 DOO ONLOIZE PPM GANA see Seb e a bead nets eevee wadnes ox 26 6 6 7 Network settings ccc ee RR R3 hh 26 T Operation iix AA eee cee eee ee 28 721 SwItChing OR and Off 2 432222 2b00655536 Un CE ROONG PENA ADA teres ke sehen 28 T2 Programme Selecion 446i eed op eee AE 28 7 2 1 Using the programme up down keys a 28 1 2 2 Using the numeric KEYS x uae ord m E or di er Oy eee hee chew DOR DRE RC 28 7 2 3 Using the Navigator programme list eee eee 28 Pie OA Selec BIS PAA AA AA 28 7 2 4 Calling up blocked programmes 0020 a 29 ness i258 cere oe eee een ee ceed Lee ea eek ee eee eres eee eee 29 7 3 Receiving encrypted programmes 00 cc ee eee ees 29 Fio LODPION CNAME 24 ic2ne2eecs ee bohweget buees tence suhag eel seer sedobeay 30 7 3 2 Selecting starting time ceca unam E X ARAL RS E DALA EES ew LONG 30 7 3 3 Simultaneous reception of two encrypted programmes 30 FA Volume CONWO MPEERMPL m 31 7 5 Selecting a different language a na annaa ccc eee eee 31 0 1 Doly Digital AA AA A 31 1 6 TV Radio Swi
41. TechniSat DigiCorder HD S2X Uu Digital Twin HD Receiver with integrated Hard drive Operating manual With two PCMCIA slots for use with CI modules For receiving free to air and encrypted e g VACCESS CONAX IRDETO SECA etc HD satellite Programmes Digital Video Broadcasting Integrated Video Recorder VIME DIGITAL TechniMatic eB 1 Contents 1 GONtGCNES 54502 TETTITCTETETTTTOITTTIITITTITITTITTOITITOTTITTIEIT 2 2 HNustratioOls a o ee ee ee aaa 5 3 Please read this first 000 cee eee 9 DISPOSI aOVICe s ree NR EE ETE ETT I ETT TE 9 Safety notes u n nannaa naa 10 When MOLIN USE 25 4 ek ok bade ek AA WG PANA wee he oe PELE OE NA AA od e A 11 Important notes on operation aue 24845 oe 645 ced oS WOL oa Read ee Se ees 11 Important note on data security 4 3 twee ead to eve ne Soe ade da oce Rea d ate ee oad 11 4 Connecting the DVB receiver 00000 cee 12 4 1 Mains power connection 0 00 cc eee eee ee 13 4 2 ENIEMALUNID Me 13 4 2 1 Operation with 2 antenna signals ccc eee ees 13 4 2 2 Operation with 1 antenna signals ccc eee 13 4 2 3 Operation with a rotating antenna 0 0 cee eee 13 4 3 Connection to a television set naana aaaea a 13 4 4 Video cassette recorder VCR 2 a 14 4 5 HiFi Surround Sound amplifier ee ees 14 4 7 Serial
42. access to the selection of antenna signals confirm with OK Antenna signals Here you must select how many antenna signals are connected to the receiver gt Using the right left arrow keys select whether you have connected one or two antenna signals 15 gt Use the green function key Accept to confirm and accept the selection and to go to the antenna configuration Antenna configuration This step of the installation allows you to adjust the setting of your digital receiver to the configuration of your antenna gt If you wish to accept the standard antenna configuration press the green function key Accept In this case proceed with the point Software update gt If the configuration of your reception installation does not conform to the standard setting press the yellow function key Change gt Carry out the antenna setting according to your receiver as described in detail under point 6 5 and then press the red function key Back in order to return to the antenna configuration gt Use the green function key Accept to confirm and accept the settings and to go to the software update Software updating When you have completed making the antenna settings the digital receiver will check whether any new version of the software for the receiver is available via satellite If a new version is available you can perform an automatic software update gt Press the green function key Update The new software f
43. al hard drive of the receiver will be available as a source gt Where appropriate first use the arrow keys up down to select the folder containing the desired MP3 file and confirm by pressing OK gt Use the arrow keys up down to select from the list the MP3 file you wish to play first and confirm by pressing OK The file selected will now be played Thereafter the other files located on the same source medium resp in the folder selected will be played automatically Skipping titles gt Press the arrow up down key to skip to the next resp the previous title Pause gt Press the yellow function key to stop the playback operation Pause gt Press the key again to resume playing the file from the position at which it was stopped Stop gt To stop the playback operation press the green function key You will return to normal operating mode Switching folder levels gt During the reproduction operation press first of all the green Stop function key in order to activate the Navigator again gt In order to get out of a file one level higher mark the Back entry with the arrow keys and confirm with OK or gt press the Back key 8 2 2 3 MP3 playback modes In addition to the regular playback mode the following additional functions are available Random play of all titles of the folder selected Repeating a title Repeat all titles of the folder selected Repeat all titles gt The various playback
44. ame of the programme selected In addition other programme properties will be indicated such as BI for Videotext 189 for a 16 9 format broadcast for encrypted programmes BO for Dolby Digital broadcasts Halll for subtitles for Mono broadcasts In addition a yellow bar will be displayed indicating the amount of time of that programme that has already elapsed Also EPGplus genres and any age restrictions will be displayed if transmitted 7 3 Receiving encrypted programmes Your appliance is equipped with an integrated CONAX de coding system as well as with a Common Interface for the recording of two CI modules These can be used to receive encrypted Programmes To do this you must first of all either insert a CONAX Smartcard into one of the two integrated card readers or plug in a CI module with a valid Smartcard into one of the two slots envisaged gt Insert the CONAX Smartcard into a card slot of the integrated card reader golden chip facing down and in the direction of insertion Or 29 gt Insert a CI module in one of the slots gt Insert the Smartcard in the card slot of the Cl module Ensure that the gold coloured chip of the Smartcard is on the upper surface in the direction in which the card is inserted gt If you now select an encrypted programme the digital receiver will automatically check the slot and will display the programme in decoded form provided the appropriate Cl module including a
45. art the current programme at the Beginning or if you wish to continue viewing Live or if you wish to switch to the Current programme gt Use the up down arrow keys to mark the desired line and confirm with OK You select Beginning the recording will be continued in time shift mode Point 8 1 3 Option 2 gt Press the key Recording A window will then appear showing the available functions gt Use the arrow keys up down to mark the line with the desired action e g 1 hour gt Confirm by pressing OK The receiver will now record the programme s being broadcast on the channel selected for the time period selected and will then automatically stop recording 8 1 2 Timer recordings You can record programmes on the integrated hard drive in your absence using the hard drive timers In addition your receiver is equipped with video recorder timers and channel switching timers In terms of their programming these Timer types differ only in name During standby mode hard drive and video recorder timers are indicated by a clock symbol You can programme the timers manually as described in this chapter or using the EPGplus function as described under Point 7 16 7 2 1 Hard drive timer In the case of this function your digital receiver will be switched on and off for the recording so this can be recorded in your absence If the unit was switched on by the hard drive timer this will be indicated by PVR Timer in the dis
46. ate the navigator again gt In order to get out of a file which is one level higher mark the top line which is marked with the back symbol sw with the arrow keys and confirm with OK 8 2 3 1 Slide show You can show pictures as a slide show Via this function the pictures will be automatically shown on the screen one after another gt By pressing the yellow slide show function key all the pictures in a file or a playlist will be automatically reproduced one after another gt To finish the slide show press the OK key and you will be returned to the Navigator 8 2 3 2 Playlist To draw up a playlist You can draw up a playlist so as to make the design of the reproduction of image data more convenient gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key NAV Menu a further window will be opened gt Use the up down arrow keys to mark the line Pictures and confirm with OK 54 Or Use the arrow keys up down to select the source from which you wish to view the picture files and confirm by pressing OK A list showing the picture files available on the hard drive or on the USB device will be displayed These are indicated by the symbol 16 Folders located on the hard drive resp on the USB device will be indicated by the symbol u Using the up down arrow keys mark first of all the file which contains the picture file which you want to add to a play
47. ayed on the screen Test Transponder The following points of this menu need only be entered if you wish to check a satellite signal of a specific satellite Transponder frequency gt In this line use the numeric keys to enter a frequency on which digital programmes are broadcast 24 Polarisation gt Use the up down arrow keys to enter the desired polarisation plane horizontal or vertical Symbol rate The symbol rate indicates the volume of data broadcast per second This figure could be shown as for example 27500 27500 symbols per second gt Use the numeric keys to enter the correct symbol rate User LNB If you have entered User LNB under the heading DiSEqC type you can make further settings LOF low band LOF Local Oscillator Frequency is the frequency at which an LNB converts the received frequency into what is known as the 1st intermediate frequency which can then be received by the digital receiver So called Universal LNBs work with 2 LOFs in order to convert the full frequency range of 10 7 to 11 8 GHz low band and 11 7 to 12 75 GHz high band gt In this line use the numeric keys to enter the LOF of the low band of your LNB LOF high band gt In this line use the numeric keys to enter the LOF of the high band of your LNB LOF transition gt In this line use the numeric keys to enter the frequency at which your LNB switches from the low band to the high band Signal level quality If you hav
48. cket analogue Mains Mains jack input 1 VCR power socket RS 232 interface HDMI output 4 9 2 4 EPG channel 0 aa 69 9 2 5 S6lecing a TY chamel METTRE 69 9 2 6 Selecting radio channels programmes nananana 0 ccc eee eee 70 9 3 Parental control PAA AA AA 70 9 3 1 FIN guery AA a ote ees wee oe dk eee we aw bows 70 d3 Chang no PIN aaa apang as hahaa oat LETTERE 70 9 3 9 Selecting a TV channel xd kae x pu Ee baw NEE de Seek eb Sea Pa NG 71 9 3 4 Selecting radio channels programmes 000 ee eee ees 71 9 4 Programme search can Ka NG AP bee ee bane AG ees eee xo cR d d 71 SUL TJAUTOIISIO SCAM aures d ted bo othe eae hE vU a voi aded Ed ddr dopo dr 12 9 4 2 Satellite scan n nananana nannaa 72 9 4 3 Transponder scan i320 4 8 AID mE deere KAANAK BG ke Ree eden on 73 9 4 4 Manual search usua acu dk ba ww be ogee ed ood ede ded dew DN Erde e ww bes 14 94 5 Durning INe SEAC uu aded beers 9 9 2 79 923909024 va 2134 oa bed 3 90 ba uid dod 14 9 4 6 After the search usare nananana 74 9 5 Service settings uuo oe AA ANAN a bee bd ow SERRE OR Repos V Rowe eee ewes 15 9 5 1 Activate factory default setting 0 0 0 ee eens 75 9 5 2 Delete all programmes 6 504 2 3 2 30 65 AA d erae annann 75 9 5 3 Updating the programme list ISIPRO 00 76 9 5 3 1 New programme list available 0 0 0 00 ccc eee eee 76 9 5 3 2 Decline programme list 2 mia nananana aaa 76 9 5 3 3 Update programme list aut
49. currently running programme immediately with just one press of the key 2 Timer controlled recording In the case of this function your digital receiver will be switched on and off for the recording so this can be recorded in your absence The timer can be programmed either manually or automatically using the EPG function 3 Timeshift recording The timeshift recording mode makes it possible to provide timeshift television viewing While the programme is still being broadcast you can already view the recording shifted in time To utilise all the recording facilities of your receiver you should ensure it is connected via two independent antenna connections This allows you to use the following combinations of recording and playback Record a programme and simultaneously reproduce another programme 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format or a recording of your choice from the hard disc Simultaneously record two programmes 1 programme in DH format and 1 programme in SD format or 2 programmes in SD format and reproduce a pre recorded programme of reception Simultaneously record two programmes even programmes from differing fields of reception 1 programme in DH format and 1 programme in SD format or 2 programmes in SD format and simultaneously reproduce a pre recorded programme If only one antenna connection is available for connection to the receiver only a limited range o
50. d during formatting all existing recordings and multi media files e g MP3 s will be lost gt To format the hard drive use the arrow keys left right to mark the field Format gt Press the OK key then confirm the message displayed by pressing OK again to start the formatting procedure Please note The receiver may be operated only with the built in hard drive supplied ex factory The receiver may be damaged otherwise Do not therefore open the unit housing and do not replace the hard drive yourself otherwise all warranty claims will be void 64 9 Changing the basic programming 9 1 Configuring the Favourites list This chapter describes how you may change the pre programming of your digital receiver as well as the Favourites programme list in accordance with your preferences This function is also required to sort new programmes into the list after a programme scan To work with this function you should know the following your receiver features the Total list as well as four Favourites lists provided the function enabling several Favourites lists has been switched on as per Point 6 6 1 The Favourites programme lists include all the programmes you have added as described below The Total list includes all programmes channels This chapter also describes how you can delete programmes how you can block access to them by means of the parental control function or how you can add them to the EPG If you press the OK key to d
51. der Point 6 6 1 a selection window showing the various Favourites lists will be displayed Confirm by pressing OK The selected programme list will be displayed Now use the arrow keys to mark the channel to which you wish to block access Block the channel by pressing the yellow function key The parental control symbol 3 will be displayed next to the programme selected To block several channels simultaneously mark these as described in 9 1 4 Marking blocks and block access to them by pressing the yellow function key When you have finished configuring the programme list according to your preferences in this manner press the Menu key to return to normal operation To reverse the blocking of individual channels proceed as described above to mark the appropriate channel and remove the parental control symbol by pressing the yellow function key 9 3 4 Selecting radio channels programmes You can use the same method as described in Point 9 3 3 to block access to radio stations 9 4 Programme search scan As mentioned above your digital receiver is pre programmed to receive from the ASTRA 19 2 East and EUTELSAT 13 0 East satellites To receive new programmes resp the programmes of other satellites there are several options provided to perform a programme search or scan 71 1 Automatic Scan Select this type of search to scan all the satellites set in the menu Antenna settings Point 6 4 and 10 4 for Programmes
52. digital receiver target receiver of the same type and equipped with the same version of operating software gt To do this connect the two receivers by means of a null modem cable gt Switch on the target receiver gt Use the arrow keys up down to mark the line Copy settings and confirm by pressing OK The following message will be displayed gt At the start of the process press a key on the source receiver The settings of the source receiver will now be transferred to the target receiver Please note any messages displayed on screen 9 6 System configuration This menu item allows you to see the specific receiver unit data e g the current software version gt Use the arrow keys up down to mark this line in the sub menu Settings gt Confirm by pressing OK gt Press the Menu key to return to normal operation 9 7 Encryption system Under this menu point you will have access to the sub menus of the inserted Cl Modules and Smartcards By confirming with OK you can access information about the Smartcard or the Cl Module used and or about the Smartcard inserted into it Manual initialisation of the Cl Modules gt By pressing the green function key Cl Reset you can manually initialise the Cl Modules 19 10 Use with a rotating antenna DiSEqC 1 2 Your digital receiver is ready for use with a motorised rotating antenna Using the DiSEqC control DiSEqC level 1 2 you have the facility to control a sui
53. dio gt Confirm by pressing OK Now depending on the previous setting the TV resp the radio programme list will be displayed gt Now use the arrow keys to mark the desired programme gt Use the arrow keys up down to move around the list one line at a time gt Use the arrow keys left right to move backward or forward in the list one page at a time gt Press the OK key to accept this into the timer Date gt Use the arrow keys to mark the column Date gt Use the numeric keys to enter the date 4 digit format of the Timer event Start gt Use the arrow keys to mark the column Start gt In this line use the numeric keys to enter the starting time for the timer Stop gt Repeat the steps as described under Start to enter the stopping time except for channel switching timer Repeat gt Use the arrow keys to mark the column Rep gt Press the OK key A selection window will be displayed showing various repeat options 1x Timer on once T Daily repeat 1W Repeat once a week 1 5 Repeat only on weekdays 44 6 7 Repeat only on weekdays gt Use the arrow keys up down to select the desired function gt Confirm and accept the setting by pressing OK Saving data to memory gt When you have completed the programming press the green function key Accept to transfer the data to memory If under Channel you have selected a channel that is blocked as per Point 9 3 you must first enter the
54. dow will appear Here you have the possibility of displaying the overall list sorted according to various selection criteria e g all broadcasters all free all new all found all German all English etc or sorted according to providers 65 Using the up down arrow keys select the desired programme lists e g languages Confirm by pressing OK An additional selection window will now be opened Now use the arrow keys up down to mark the selection criterion you wish to apply in sorting the Total list Select for instance All German to display German speaking broadcasters Confirm by pressing OK Now the programme list will be displayed according to the selection previously made Programmes which are already in the favourites list are marked with the appropriate favourites programmes place 9 1 4 Adding programmes to the Favourites list To add a programme from the Total list to one of the Favourites lists call up the programme list manager as described in Point 9 1 1 where appropriate select the desired Favourites list and change to the Total list gt Press the blue function key Functions A selection window will be displayed listing the available functions Use the arrow keys up down to mark the line Add Confirm by pressing OK Use the arrow keys up down to mark a programme you wish to add to the list Press the yellow function key Add to add the marked programme to the Favourites list Marking blocks To
55. e clock with the assistance of the right left arrow keys until it matches your local time For Germany this difference is 1 hour and 2 hours in summer 18 6 2 3 Date hour In this menu point decide whether the hour and the date should be automatically read in from a determined programme after switching on gt By pressing the OK key another window will open gt In this window use the up down arrow keys to select either the entry Automatic or select the programme from which the hour and the date should be read in and confirm the selection with OK 6 2 4 Standby clock In this line you can decide whether the current time is to be shown in the display while the receiver is in standby mode gt In this line use the arrow keys left right to set the mode of the standby clock to on or off 6 2 5 Remote control code At this stage you must decide whether your receiver should be allocated to the remote control option SAT1 or SAT2 gt To do this press the SAT1 or SAT2 key and the OK key on the remote control simultaneously in this line 6 2 6 Quickstart In this line you switch the quickstart on off If quickstart is switched on your appliance will start more quickly from standby although the standby will use more current gt Switch the quickstart on off by using the left right arrow keys Accepting settings To store the settings made in this menu to memory please proceed as follows gt Press the green function key
56. e entered the details of the test transponder correctly the signal strength and quality will be indicated in these lines 6 5 6 Rotating antenna If you are operating your digital receiver in conjunction with a rotating antenna equipped with a DiSEqC motor Level 1 2 switch the DiSEqC control Point 6 4 1 on and please note Point 4 2 3 and Point 10 of the operating manual 6 6 Special functions This menu allows you to make the settings for CI dual decoding as well as for the duration for which the Infobox will be displayed in addition to the function required to switch several Favourites lists on or off gt Press the Menu key to call up the Main Menu gt Use the arrow keys up down to mark the line Settings and confirm by pressing OK gt Now use the arrow keys up down to mark the line Special functions gt Confirm by pressing OK The menu Special functions will be displayed gt Use the arrow keys up down to mark the entry you wish to change 6 6 1 Several Favourites lists gt Use the arrow keys left right to switch the function for several Favourites lists on resp off 25 If the function is switched on you can configure four lists of favourites main list favourites 1 favourites 2 and favourites 3 The ex works programming can be found in the main list When the function is switched off only the main list is active 6 6 2 Display time Information Banner gt Use the numeric keys to set the desired displa
57. e for the EPG long texts gt Set large or small by using the right left arrow keys 6 6 7 Network settings In this submenu you have the option of adapting the digital receiver to your Ethernet network environment Accepting settings To store the settings made in this menu to memory please proceed as follows gt Press the green function key Accept to store the changes made and to return to the menu Settings alternatively 26 Press the red function key Back A corresponding query then appears If you wish to accept the changes use the arrow keys left right to click on the field Yes and confirm by pressing OK You will now return to the previous menu Press the TV Radio key to return to normal operation Settings will not be saved Zt 7 Operation 7A Switching on and off gt Switch the digital receiver on by pressing the On Standby either on the receiver or on the remote control gt Press the key again to switch the receiver off again gt The receiver is now in standby mode and if activated in Point 6 2 4 the display panel will show the current time If the time is not shown this must still be acquired by the receiver To do this switch the receiver on and select a major channel such as ZDF for approx 30 seconds to automatically acquire the time 7 2 Programme selection 7 2 1 Using the programme up down keys gt Use the programme keys up down either on the receiver or on the remote cont
58. e the optimum position for the desired satellite by monitoring the indicators for signal strength and signal quality Adjust the dish so that both bar graphs show a maximum value gt Use the arrow keys up down to mark the field save gt Now use the arrow keys right to mark the field East resp left to mark the field West to rotate the dish to the desired position In each case keep the key pressed down until the position has been reached As soon as the reflector has finished the rotating procedure the receiver will automatically check the orbital position and shows this insofar as it is obtainable in the lower part of the menu 10 3 2 3 Automatic fine adjustment Autofocus Before saving a satellite position you should perform the automatic focussing function In this the dish is calibrated for optimum reception 83 To open the window listing the available actions press the blue function key Actions Now use the arrow keys up down to mark the line Autofocus Confirm by pressing OK Autofocus is started Whilst the automatic alignment is being done the message Auto Focus appears 10 3 3 Saving a satellite position When you have completed the autofocus procedure you must still save the satellite position in the memory gt gt gt To do this use the arrow keys to mark the field save Press the OK key The message will appear if the orbital positions on which the reflector is aligned coincide with t
59. ed The ongoing rotation will be indicated in the menu by the blinking message turn 10 4 1 Turning to a satellite position To turn the antenna to the position set in the satellite list your digital receiver is equipped with the function turn to sat 84 gt By pressing the yellow function key Turn to Sat the antenna will be turned to the selected satellite position 10 5 Deleting a satellite position To delete a satellite position from the satellite list proceed as follows gt gt gt gt gt gt Use the arrow keys to mark the field Current satellite list To open the current satellite list press the OK key Use the up down arrow keys to select the satellite you wish to delete and confirm with OK Use the arrow keys to mark the field Delete satellite To delete the satellite selected press the OK key Mark the field OK and confirm by pressing OK 10 6 Reference position When installing the external installation the motor must be set to the reference position 0 You can therefore use the function Go to reference position to turn the motor to this position O at any time gt Press the green function key Ref position to turn the antenna automatically to the reference position 85 12 Technical data DBS Tuner 1 SAT Front End with DVB S2 Input frequency range Demodulation Symbolrate 950 2150 MHz DVB S QPSK DVB S2 BPSK QPSK DVB S 2 45
60. ed programmes in the search All programmes gt Use the arrow keys up down to mark the field Start search and confirm by pressing OK Depending on the configuration of your antenna installation a scan can take 15 minutes or more Please also note Points 9 4 5 and 9 4 6 and the on screen messages 9 4 2 Satellite scan To scan a single satellite for programmes select Satellite scan Here you can decide whether you wish to scan for all free to air and encrypted programmes or only for free to air Programmes gt Press the OK key again to open the selection table for the active satellites selected in accordance with Points 6 4 and 10 4 gt Use the arrow keys up down to mark the menu item All satellites to scan all active satellites for programmes or mark the desired satellite to scan only this satellite for Programmes gt Confirm by pressing OK 72 gt Use the arrow keys up down to mark the line Search mode gt By pressing the OK key decide whether you wish to scan only for free to air programmes Free programmes or whether you wish to include encrypted programmes in the search All programmes gt Use the arrow keys up down to mark the field Start search Please also note Points 9 4 5 and 9 4 6 and the on screen messages 9 4 3 Transponder scan You can scan a specific transponder see Point 11 Technical terms for Programmes To do this you need to enter the transponder data Satellite In this line you must
61. een controls eee nn 50 52 22 BI CE EU 62 13 x ad ai cup 90 259 eri AA 51 9 2 2 9 MP3 playback MOdES a bee nd dox wow a aca 9 bitewtenede thu Wah WG Ra nd 52 Od PANID s s geo eee heres TE oe com ees ee eee eS E E eet MG NA AA DANG 52 8 2 3 Viewing pictures cus cea AG AK eee Abe ee eee Renew eee RA eae ee 54 62o tode SNOW 22 9 x oa oes pe owed SERIEN DARA eSS eae eee eee ee Sater M E E 54 Du MA a CA 55 8 3 Managing the hard drive kaan uice 08 d a Moe edicion ic NG os i BUR E diea e NG d 56 8 3 1 Managing recordings suus nsn KK ERA CR OR net BALAAK KG Ooh KAG KAKA aan end 56 Bil DEINO paaa Gaman aa HABAG NMA BAKA NANALASA E KAR AHAHA KAG AKOA A 56 omo MM Parental CONTO PAA AA 56 OO lhe 8 e peo keane ou tensa eee ooo ke bee Boe oe eee Adee eter eee alot ead 57 8 3 2 Managing music pictures cc ee ee eee eens 60 D3 PAES ie li anan a aa BAE oe eee ed REUS ee eee Sse Eee Ghee DENE NAO AL 61 DOO run eke ee heh eee aes ALAN ote sees qe ee heh ce Ree rd E 61 Coe DOUNO oes Antena qa qa eS ed RR eee yea hee eee eee ee gee 62 8 3 2 4 Sampling MP3 files showing picture files llle 62 8 3 3 Copying TOCOPOITICS cuoio ag cde keane SAYA NABA iira d KABI Ee GaP RUE ou wk eee Kapihan 62 Doo EXDOIL 2 cur d EOS eet eas eee eee beer gh AA de eeecueeaseuae ass 63 E ducc AA AA AA PAA AA 63 8 3 3 3 Deleting pak ad 63 9 041 Hard drive information x a ex ossad once ANA BA bee GE TANAH HAN TAG ek owes K
62. es until the entry Subtitles displays a selection table listing the subtitle languages broadcast and or the videotext pages used to broadcast subtitles gt Use the up down arrow keys to mark the desired language or videotext page gt Confirm by pressing OK The subtitles will now be displayed Please note that this function is only present when subtitles are actually being transmitted and this setting will not be kept after changing Programmes 7 14 PIP function picture in picture Your receiver is equipped with a so called PIP function This allows you to view a second smaller picture PIP picture within the larger main picture Call up PIP operation gt Switch Picture in Picture mode on by pressing the PIP key Main picture PIP image The current main picture which can be sourced either from a TV programme or from a hard drive recording will be displayed as a small PIP picture in the upper right corner and the TV programme last viewed will be displayed as the main picture The soundtrack of the main picture will always be reproduced when in PIP mode Please note For technical reasons it is not possible two receive simultaneously two programmes which are transmitted in the HD format Please also take into account point 6 5 3 antenna signals In order to be able to use all of the possibilities of PIP operation of you receiver you should definitely be connected to two separate antenna supply lines In that wa
63. evision set When you have connected your digital receiver with your television set it may be necessary to adjust the signal type or the mode of the Scart socket to your television set d Use a SCART cable to connect the receiver SCART socket TV with the television set SCART socket If your television set is appropriately equipped it will automatically switch to AV and thus to satellite operation when the digital receiver is switched on eG Connect the receiver HDMI output and TV set HDMI input using an HDMI cable If your TV set is appropriately equipped it will automatically switch this over to the HDMI input when the digital receiver is switched on 13 4 4 Video cassette recorder VCR f Connect the video recorder to the SCART socket VCR During playback the video recorder will provide a switching signal to the digital receiver This will allow the video recorder signal to be routed automatically to the TV set If your video recorder does not supply a switching current use the O AV key to switch your digital receiver to the external input AV Press this key again to return to normal operation 4 5 HiFi Surround Sound amplifier To achieve the best possible sound quality you can connect the digital receiver to a HiFi Surround Sound amplifier 4 5 1 Analogue g Using a suitable cable connect the Audio R and Audio L cinch sockets of the digital receiver to an input of your HiFi amplifier e g CD or AUX Note that t
64. expose the unit to dripping or sprayed water and do not place any objects filled with water e g vases on top of it If water gets into the unit pull out the mains plug immediately and contact Customer Service Do not poke any objects through the ventilation slots Never open the unit Otherwise you will be at risk of an electric shock Any necessary repairs should only be carried out by trained personnel 10 In the following cases you should disconnect the receiver from the mains power and should consult an expert gt the mains cable or the mains plug are damaged gt the receiver was exposed to liquid or liquid has run into the unit gt in case of severe malfunctions gt in case of significant external damage When not in use During a storm or when not in use for a long period e g holiday the unit should be disconnected from the mains and the antenna cable should be removed Before disconnecting the unit from the mains you should first switch it to standby and then wait until the time appears in the display and the red LED lights up Important notes on operation The use of so called On Screen Displays OSD means that operation of the digital receiver is simplified and the number of keys on the remote control unit reduced All functions are displayed on screen and can be controlled by means of a few simple keystrokes Functions that are logically connected are combined in a MENU Any function selec
65. f Programme TV radio mode Videotext on off Freeze frame Jogshuttle on off This function is only available when the Tec hniSat corresponding data is transmitted to the selected programme list position Remote control option By switching the remote control option this remote control unit can be used to control two TechniSat receivers and one TechniSat television set with the same coding gt To switch the remote control option press the desired key SAT1 SAT2 or TV and OK simultaneously Please note To operate this receiver the remote control option selected here and the remote control code set as described under Point 6 2 3 must correspond Front of unit On Alphanumeric Eject buttons for CI module CI module Standby Arrow keys display Cl modules slot 2 slot 1 Back Play Pause USB socket ney Card reader gt Insert the CONAX Smartcard golden chip facing downwards and in the direction of insertion until the point of contact in the card reader Inserting the Cl modules gt Follow the instructions provided by the manufacturers of the Cl module and card gt Insert the desired Smartcard into the appropriate Cl module gt Now carefully insert the complete Cl module into the slot provided Back of unit Components Video und Audio Component Audio outputs outputs analogue outputs digital LNB SCART socket input 2 TV Video Output Audio outputs LNB SCART so
66. f recording and playback options is available Record a programme and simultaneously reproduce another programme from the same field of reception 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format of reproduce a hard disc recording of your choice 41 Simultaneously record 2 programmes from the same reception band 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format and reproduce a pre recorded programme 8 1 1 Instant recording Starting a recording manually Option 1 gt Switch on the channel on which the programme is being broadcast that you wish to record gt Press the Record key to record the programme currently being broadcast The programme will continue to be displayed on screen while the recording is in progress gt To interrupt the display of the current programme at a specific spot press the yellow function key Play Pause While the recording continues in the background a still image freeze frame will be displayed on screen gt To proceed with playing the programme from this spot again press the yellow function key Play Pause You will now view the programme shifted in time relative to the live broadcast Timeshift while the ongoing current programme will continue to be recorded in the background Option 2 gt If you have to interrupt viewing a programme e g because of a phone call etc you can interrupt viewing of the programme by pressin
67. face are trademarks registered by HDMI Licensing LLC DE orev Dolby and the Double D symbol are the trademarks of Dolby Laboratories Manufactured under licence from Dolby Laboratories 3 Please read this first gt Before starting to use your receiver please check that all the components have been supplied correctly The following should be included 1 digital receiver 1 mains cable 1 remote control 1 operating manual 1 guarantee card 2 batteries 1 5V microcells gt Please insert the batteries supplied into the battery compartment of the remote control unit with attention to the correct polarity as indicated Disposal advice The packaging material of your receiver consists entirely of recyclable materials Please sort the components appropriately and dispose of them in line with your local waste disposal regulations At the end of its useful life span this receiver may not be disposed of in your regular domestic refuse bin It must be taken to a recycling collection point for electrical and electronic equipment The symbol on the product the operating manual or the packaging will indicate this The materials can be recycled or reused according to their labelling By ensuring that valuable raw materials are used again you can make an important contribution towards protecting our environment Please ask your local authority about available disposal facilities Ensure that the spent batteries f
68. formation is broadcast by the programme provider 7 9 Additional programme information Wherever these are provided you can use the function programme information to obtain additional programme information relating to the programme selected gt By pressing the Info key twice a further information window is opened which contains detailed information on the currently selected programme gt Longer information text can be moved line by line using the up down arrow keys or page by page using the left right arrow keys gt Where available pressing the Info key again will bring up the next programme gt Press the Info key once again to switch off the display 7 10 Transponder information gt Call up the navigator by pressing OK gt Use the arrow keys to mark the programme you wish to display gt By pressing the yellow STATUS function key the data of the transponder which is set will be displayed gt In addition you can use the coloured function keys to display Audio Video information Program information and where available information on the Encryption system CA in use gt Press the Menu key to exit the information function 7 11 Freeze frame gt Press the Freeze frame key and the current moving TV picture will be frozen and displayed as a still picture gt Press this key again to return to normal operation 32 7 12 Videotext 7 12 1 Using the Videotext decoder of your television set If transmitted
69. g the yellow function key Play Pause at the same time starting recording of the current programme While the recording is started in the background a still image appears on screen gt To proceed with playing the programme from this spot again press the yellow function key Play Pause You will now view the programme shifted in time relative to the live broadcast Timeshift while the ongoing current programme will continue to be recorded in the background Ending a recording manually To end the recording procedure first press OK Now press the green function key to go to the PVR navigator Use the arrow keys up down to mark the current recording and confirm by pressing OK The programme slot of the current recording will now be selected Now press the green function key Stop A query will appear Use the arrow keys up down to select Save in order to save the recording on the hard drive or select Discard in order not to save the programme and confirm by pressing OK End recording automatically Option 1 gt Press the On Standby key A query will now appear asking what should be done with the current recording 42 gt Use the arrow keys up down to mark the line with the desired action gt Confirm by pressing OK The receiver will record the whole programme and then go into standby mode gt If you switch the receiver on before the end of the programme a query will be displayed asking whether you wish to st
70. grammes simultaneously mark these as described in Point 9 1 4 Marking blocks gt Now press the yellow function key Sort A double arrow will appear next to the selected programme block gt You can now use the arrow keys up down and or the numeric keys to place the marked programme block at the position in the programme list where you would like it to be gt Press the yellow function key Sort to save the programme block at the new position gt When you have finished configuring the programme list according to your preferences in this manner press the Menu key to return to normal operation 67 9 2 Programming the electronic programme guide Your receiver gives you the option of receiving a data channel with additional EPGplus data via ASTRA satellite systems 19 2 East This data makes it possible to preview EPGplus information for up to a week gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Setting gt Confirm by pressing OK The sub menu Settings will be displayed Use the arrow keys up down to mark the line Programme guide gt Confirm by pressing OK The menu Programme guide will be displayed gt Use the arrow keys up down to move the marker within the menu and to change the individual positions as indicated When selecting a menu item please also note any messages displayed on screen 9 2 1 Updating gt To receive the data channel mark the line Upda
71. green function key to open the PVR navigator By pressing the blue function key NAV Menu a further window will be opened Use the arrow keys up down to mark the entry Music and confirm by pressing OK With the up down arrow keys select the source on which the appropriate playlist exists and confirm with OK In order to change to replay list viewport press the option key and with the up down arrow keys mark the replay list line Now use the up down arrow keys to mark the playlist which you want to edit To delete a title from the playlist mark it with the arrow keys and press the green function key PLS To delete a playlist gt gt gt While in normal operating mode press the green function key to open the PVR navigator By pressing the blue function key NAV Menu a further window will be opened Use the arrow keys up down to mark the entry Music and confirm by pressing OK With the up down arrow keys mark the source in which the appropriate playlist exists and confirm with OK You are now in the viewport Mark the playlist with the up down arrow keys By pressing the green function key PLS the complete playlist will be deleted 8 2 3 Viewing pictures You can display pictures created as described under Point 8 2 1 4 as well as data saved in JPG format on the hard drive or on a device connected to the USB port using your receiver The USB device should be formatted using the file system FAT 32 Consult Poin
72. h you want to include into the playlist gt Press the green function key PLS to add the title to the playlist or gt With the up down arrow keys mark a file which contains the MP3 files and press the green function key PLS in order to incorporate the complete contents of the file into the playlist In this manner you can draw up a playlist according to your wishes To display playlist gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key NAV Menu a further window will be opened gt Use the arrow keys up down to mark the entry Music and confirm by pressing OK gt Use the arrow keys up down to select the source from which you wish to play back the MP3 files and confirm by pressing OK 52 A list of the MP3 files available on the hard drive or the USB device will appear These are indicated by the symbol 5 Folders located on the hard drive resp on the USB device will be indicated by the symbol cu You find yourself in the viewport In order to change to the replay list viewport press the option key and mark the line Replay Lists with the up down arrow keys Confirm by pressing OK Now all of the playlists contained in the storage medium will be displayed Now use the up down arrow keys to mark the playlist which you want to call up and confirm with OK To delete titles from the playlist gt While in normal operating mode press the
73. he orbital position of the satellite to be stored Using the arrow keys mark the panel Yes if you wish to accept the pre configured programme of the selected satellites into the TV and radio lists and then confirm with OK If it has not yet been possible to ascertain the orbital position then a search inquiry will appear To save the satellite position use the arrow keys left right to mark the field Yes and confirm by pressing OK Using the arrow keys mark the Yes panel in the subsequently appearing window if you wish to accept the pre configured programmes of the selected satellites into the TV and radio lists and then confirm with OK If during this checking of the test transponder no pre programmed position is recognised or if the signal is too weak appropriate messages will be displayed on screen To save the satellite position use the arrow keys left right to mark the field Yes and confirm by pressing OK Confirm the following message by pressing the OK key 10 4 Current satellite list The saved satellite positions can be found in the satellite list Positions that have not yet been saved are indicated in this list marked with an gt To rotate the dish to a position included in the satellite list use the arrow keys to mark the field Current satellite list Press the OK key Use the arrow keys up down to select the desired position Confirm by pressing OK The dish will now be rotated to the position select
74. he phono input is not suitable 4 5 2 Digital g gif your amplifier is equipped with a suitable electrical or optical input connect the socket AUDIO OUT DIGITAL electrical resp AUDIO OUT DIGITAL optical with the electrical resp the optical input of your amplifier Depending on the channel the sampling rates 32 44 1 and 48 kHz are available Also where broadcast the Dolby Digital signal is available at this output 4 7 Serial interface RS 232 The USB Serial interface serves to update the operating software as well as proprogramming in conjunction with a PC 4 8 USB Buchse The RS 232 interface serves to update the operating software as well as transferring data on or from the hard drive 14 5 Initial installation After you have read the safety notes and connected the unit as described in Chapter 4 switch the unit on as described in Chapter 7 When switching on the receiver for the first time the starting window of the installation assistant Autolnstall will be displayed The installation assistant allows you to make the most important settings of your digital receiver in the simplest way possible At each step of the installation there will be an explanation as to which settings can be made You can interrupt the initial installation by pressing the red function key in the starting window of the installation assistant In the following steps of the installation you can then confirm the settings made by pressing the g
75. isplay a programme list the currently active Favourites programme list will be displayed 9 1 1 Calling up the programme list manager To edit the Favourites list proceed as follows gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Manage TV lists to work on the TV list or Manage radio lists to work on the radio list gt Confirm by pressing OK The programme list manager for the respective Favourites list TV or radio list will be displayed The Main Favourites list will be shown on the right half of the screen This is now active as the most recently selected programme of the Main Favourites list is marked On the left half of the screen you will see the alphabetically sorted Total list This Total list includes all available Programmes 9 1 2 Select a Favourites list gt By pressing the green function key TV main menu you can change from the overall or the provider list to the favourites list gt To select a favourites list press again on the green function key TV main menu A window will be displayed showing the lists available Please also note Point 6 6 1 of the operating manual gt Use the arrow keys up down to mark the Favourites list you wish to work on and confirm by pressing OK 9 1 3 Select Total list gt Press the red function key to switch the marking to the Total list This is now active gt With renewed pressure on the red function key a selection win
76. ive recordings through the hard drive PVR navigator 8 2 1 Playing back recordings 8 2 1 1 Reproducing hard drive recordings gt While in normal operating mode press the green function key to open the PVR navigator Depending on whether you are in TV or radio mode a list of all TV or radio recordings available on the hard drive will be displayed The marked recording will already be played back in the preview window Use the arrow keys up down to select the recording you wish to play Confirm by pressing OK to start the playback procedure The message Play gt will be displayed briefly Recording information gt Call up the PVR navigator as described in Point 8 2 1 1 Using the arrow keys mark the recording on which you wish to access more information By pressing the yellow status function key the information on the market recording will be faded in Press the Return key to go back to the PVR navigator Recording a broadcast and at the same time playing an existing recording In addition you can play an existing recording from the hard drive simultaneously with a new recording being stored gt While a recording is in progress call up the PVR navigator as described in Point 7 2 9 Use the arrow keys up down to mark the recording you wish to play and start the 47 playback procedure by pressing OK 8 2 1 2 Pause Freeze frame gt To stop the playback of a recording freeze frame press the
77. iver is operated on a multi tenna LNB then under this menu point you could automatically adjust the switch positions on the multi tenna LNB gt Use the OK key to automatically adjust the switch positions 6 5 2 Switching DiSEqC on and off DiSEqC Digital Satellite Equipment Control is a digital switching controlling signal used to control DiSEqC compatible components via the antenna cable If your external unit is equipped with DiSEqC components you must switch the DiSEqC controlling function gt In this line use the arrow keys left right to switch DiSEqC on or off As only one LNB can be controlled when the DiSEgC function is switched off the menu is limited to the configuration of a single LNB 6 5 3 Antenna signals Your receiver is equipped with two tuners This allows you to record one programme while viewing another programme So that you can enjoy the full benefit of the functions of your twin receiver for both recording and playback you should definitely use two separate antenna connections antenna signals Please also note Point 8 1 gt In this line use the arrow keys left right to set the number of antenna signals to 2 if you are connecting your receiver to two separate antenna connections If only one antenna connection is available then set this item to 1 To utilise all the recording facilities of your receiver you should ensure it is connected via two independent antenna connections This allows you to use the foll
78. ividual days of the week are displayed along the lower edge of the screen If information is available for the following days the appropriate fields will be marked gt To display the programme content of a specific day press the corresponding numeric key Displaying the EPGplus overview for other channels gt Press the yellow function key Programmes A list of EPGplus programmes will be displayed gt You can now proceed to mark the desired channel using the arrow keys gt Press the OK key to display the EPG overview of the marked channel 7 16 7 4 EPGplus overview by type of programme genre 39 If you are interested in specific types of programmes you can have the programme information displayed by various genres e g movies news etc gt gt gt Press the EPG key to open the table Now Press the blue function key EPG Menu to open a selection window Use the arrow keys up down to mark the line Genres and confirm by pressing OK Press the yellow function key Genres to open a window with the available types of programme Use the arrow keys to select the desired programme type and confirm by pressing OK The overview for the day will be displayed listing only programmes of the type selected Use the arrow keys up down to move the marker to the desired programme Use the arrow keys left right to move through the list one page at a time The individual days of the week are displayed along the lo
79. l receiver The Electronic Programme Guide then appears on the screen If you have selected the starting category Overview Point 9 2 3 the channels you have selected or those of the factory default settings will be shown with their current programmes see also Point 9 2 You can now use the EPOplus function to find information on the content of the various Programmes You can also use the EPGplus functions to select or mark the desired programme or activate it in the Timer programming function 7 16 4 Now Table with current programme contents First the Now EPOplus table will be displayed showing the programmes currently being broadcast The yellow bar next to the programme name indicates the elapsed time of the current programme The programme currently selected is marked gt Use the up down arrow keys to move the marker one line at a time 36 gt Use the left right arrow keys to move through the programme list one page at a time The EPGplus functions Point 7 16 7 are now available gt Pressing the yellow function key takes you to the Next EPGplus table see Point 7 16 5 or gt Press the TV Radio key to return to normal operation 7 16 5 Next gt You can call up the Next table following programmes by pressing the yellow function key when the Now EPOplus table is displayed The EPGplus functions Point 7 16 7 are available gt Pressing the yellow function key takes you to the More EPGp
80. language will be displayed gt Use the up down arrow keys to select the desired language gt Press the OK key to store the entry and to return to the Main menu gt By pressing the red function key Back you will return to Normal operation without saving the setting 6 2 Basic settings Under this point you will find out how to adapt the receiver to your individual requirements gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Settings gt Confirm by pressing OK The sub menu Settings will be displayed gt Use the arrow keys up down to mark the line Basic settings gt Confirm by pressing OK gt Use the arrow keys up down to move the marker within the menu and to change the individual positions as indicated When selecting a menu item please also note any messages displayed on screen The following settings adjustments can be made 6 2 1 Country This function allows the adjustments for the difference to GMT as well as the change over from standard to daylight savings summer time to be made automatically gt By pressing the OK key another window will open gt In this window choose your country using the arrow keys and then confirm with OK 6 2 2 Time zone Your receiver is equipped with a clock This is synchronised to Greenwich Mean Time via satellite gt If under country point 6 2 1 the setting was user defined then you must simply set the time on th
81. lation assistant Autolnstall will be started Any data on the hard drive recordings MP3s etc will be retained gt Use the arrow keys up down to mark the line Activate default setting gt Press the OK key The query message will be displayed Do you really want to activate the default setting gt Use the arrow keys left right to select Yes or No 9 5 2 Delete all programmes This function will delete all programme memory banks gt Use the arrow keys up down to mark the line Delete all Programmes gt Press the OK key The query message will be displayed Do you really want to delete all programmes gt Use the arrow keys left right to select Yes or No gt Confirm the entry by pressing OK 19 9 5 3 Updating the programme list ISIPRO The ISIPRO programme list updating function ensures that the programme list of your receiver will automatically be kept up to date To do this a current programme list is broadcast at regular intervals via satellite ASTRA 19 2 East and is available to your receiver for downloading Should the parameters for the data channel used to download the programme list have changed you can correct them either in this menu or under Point 9 4 4 manual programme scan Current transponder data can be obtained from your retailer Generally under normal circumstances you should not make any changes in this menu gt Press OK to go to the Update programme list submenu gt
82. lity of removing whole sections or topics from an existing recording e g unwanted advertising blocks Please note The deleted sections are irrevocably removed from the hard drive To delete a section proceed as follows Both the beginning and the end of the section that is to be removed must be marked by two marks tags gt To do this mark the beginning and the end of the section to be removed with one mark each as described under Setting a mark gt Now use the arrow keys to set the mark that indicates the beginning of the section that is to be removed The section to be deleted is now highlighted in red 1 both on the progress indicator and in the overview of marks set gt Now press the green function key Menu and use the arrow keys up down to mark the line Delete section gt Press OK to display a query window gt To actually delete the section use the arrow keys left right to mark the field OK and confirm by pressing OK Extracting a section This function allows you to copy a section of a recording A new recording is generated consisting only of this section The recording from which this section is copied remains in memory unchanged To extract a section proceed as follows The beginning and the end of the section that is to be copied must be indicated by two 58 markers gt To do this mark the beginning and the end of the section to be removed with one mark each as described under Setting a mark
83. ll after a scan automatically set this language 6 4 2 Sub title language Your DVB receiver is able to display subtitles If the function Subtitles is switched on and the language selected is being broadcast these will be displayed automatically gt In this line use the arrow keys left right to select your subtitle language If the function is not activated subtitles can also be switched on manually The availability of subtitles is indicated by display of the message Subtitles Please also note Point 7 13 of the operating manual 6 4 3 Dolby Digital Various movies are broadcast in Dolby Digital format This will be indicated in the info window after the programme has been selected by the Dolby symbol BG If you have a Dolby Digital 5 1 channel amplifier you can where broadcast enjoy appropriate movies in 5 1 channel Dolby Digital sound The only requirement is that the digital output Audio Out Digital see Point 4 6 2 of your DVB receiver must be connected to the digital input of your Dolby Digital 5 1 channel amplifier gt Use the left right arrow keys to switch the Dolby Digital function on or off If the Dolby Digital function is switched on these broadcasts will automatically be reproduced in Dolby Digital format If the function is not switched on off Dolby Digital sound can also be switched on manually Please also note Point 7 5 1 of the operating manual Accepting settings To store the settings made in thi
84. lus table Point 7 16 6 or gt pressing the green function key or the Back key will take you to the previous Now EPGplus table Or gt Press the TV Radio key to return to normal operation 7 16 6 More gt Pressing the yellow function key again when the Next EPGplus table is displayed will cause the More EPGplus table to appear An additional time window will appear in the headline of this table The time of the displayed EPGplus table will appear in this time window gt Press the yellow function key to skip forward to the time shown in the yellow coloured area gt Keep the yellow function key pressed down to page through the information continuously A clock will be displayed to make the information more legible gt Pressing the green function key takes you back through the tables The individual days of the week are displayed along the lower edge of the screen If information is available for the following days the appropriate fields will be marked gt To view a preview for a specific day use the numeric keys to enter the appropriate number for the day required or gt Press the numeric key O to go to the PVR navigator gt Press the Back key to return to the table Next 7 16 7 EPGplus functions To carry out the following EPGplus functions call up EPGplus as described under Point 7163 7 16 7 1 EPGplus Info You can use EPGplus Info to display detailed information and a picture rela
85. m the playlist gt While in normal operating mode press the green function key to open the PVR navigator By pressing the blue function key NAV Menu a further window will be opened Use the up down arrow keys to mark the line Pictures and confirm with OK Use the up down arrow keys to select the source in which the appropriate playlist is situated and confirm with OK In order to change to the replay list viewport press the option key and use the up down arrow keys to mark the line replay lists Now use the up down arrow keys to mark the playlist which you want to edit To delete a picture from the playlist mark it with the arrow keys and press the 95 green function key PLS To delete a playlist gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key NAV Menu a further window will be opened gt Use the up down arrow keys to mark the line Pictures and confirm with OK gt Use the up down arrow keys to select the source in which the appropriate playlist is situated and confirm with OK You are now in the file viewport gt Use the up down arrow keys to mark the playlist gt By pressing the green function key PLS the complete playlist will be deleted 8 3 Managing the hard drive gt Press the Menu key to call up the Main menu V Use the arrow keys up down to mark the line Manage hard drive gt Confirm by pressing OK The menu Ma
86. modes can be selected by means of the Option key or the Language select key 51 The various modes are shown on screen resp on the display panel as follows Function Display Screen Repeat all titles P Directory b 123 Normal playback of all titles of the O Directory j 45 folder selected C 123 Random play of all titles of the O Random playback E 123 folder selected Directory Repeat current title O Title tet 8 2 2 4 Playlist To draw up a play list You have the possibility of drawing up a playlist so that you have more convenient access to the replaying of MP3 files or radio recordings gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key NAV Menu a further window will be opened gt Use the arrow keys up down to mark the entry Music and confirm by pressing OK gt Use the arrow keys up down to select the source from which you wish to play back the MP3 files and confirm by pressing OK A list of the MP3 files available on the hard drive or the USB device will appear These are indicated by the symbol 2 Folders located on the hard drive resp on the USB device will be indicated by the symbol cu gt With the up down arrow keys mark first of all the file which contains the MP3 files which you want to add to the playlist and confirm with OK gt With the up down arrow keys select from the list the MP3 file whic
87. n LNBs Example 3 4 satellites Quattro LNBs Astra 19 2 Eurobird Astra 28 5 Astra 19 2 rksat 42 Eurobird Astra 28 5 Astra 19 2 Eutelsat 13 utelsat 13 Eutelsat 13 X e 3 OO Multiswitch Multiswitch 9 8 9 8 Bis a pa OOO CDUUUU 6 5 5 Additional settings LNB properties Once you have completed adjusting the switching matrix of your DVB receiver to the requirements of your receiving installation you must still check and where necessary correct the other settings for your receiving unit gt Use the left right arrow keys to move the marker to the column Configuration gt Now in the line in which you wish to check or change the settings use the up down arrow keys to mark the field Continue gt Confirm by pressing OK A sub menu will be displayed in which you can make settings related to the LNB and can set up a test transponder The following settings adjustments can be made LNB Type gt Use the left right arrow keys to enter the type of LNB you are using The options are Single LNB Quattro LNB DisiCon 1 LNB DisiCon 2 LNB DisiCon 4 LNB C Band LNB Circular LNB SatCR LNB and a User LNB for manual entry of LNB data gt If you have selected the SatCR LNB you must then use the arrow keys to mark the line Setup and you must then start the setup by pressing the OK key A Sat CR Scan will now be performed Please take note of the further information displ
88. n arrow keys to selected the desired resolution or auto for automatic setting of the resolution 6 3 3 TV SCART mode gt In this line use the arrow keys left right to set the parameter appropriate to your TV set to the options FBAS RGB or S Video For standard sets use the setting FBAS Accepting settings To store the settings made in this menu to memory please proceed as follows gt Press the green function key Accept to store the changes made and to return to the menu Settings alternatively gt Press the red function key Back A query then appears gt If you wish to accept the changes use the arrow keys left right to click on the field Yes and confirm by pressing OK You will now return to the previous menu gt Press the TV Radio key to return to normal operation Settings will not be saved 6 4 Sound settings In order to optimise your digital receiver onto your TV set you can undertake further settings in the menu sound settings gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Settings gt Confirm by pressing OK The sub menu Settings will be displayed gt Use the up down arrow keys to mark the line Sound Settings 20 gt Confirm by pressing OK The Menu Picture settings will appear 6 4 1 Audio speech gt In this line use the arrow keys left right to select your preferred language Where an appropriate signal is broadcast this function wi
89. nage hard drive will be displayed V Use the arrow keys up down to move the marker within the menu and to change the individual positions as indicated 8 3 1 Managing recordings In this menu you have the facility to manage your recordings gt Press the OK key to go to the sub menu Manage recordings A list of the recordings available on the hard drive will be displayed gt Use the up down arrow keys to mark the desired recording 8 3 1 1 Delete gt To delete the marked recording press the red function key Delete gt Use the arrow keys left right to mark the field OK and confirm by pressing OK to actually delete the recording 8 3 1 2 Parental control You can block access to recordings that are not suitable for children or adolescents These recordings can then only be played and viewed after the four digit unit PIN code has been entered The parental control function is only active if it has been switched on as described in Point 9 3 gt Press the green function key to block access to the marked recording The recording selected will be indicated as blocked by the parental control symbol 8 3 1 3 Edit gt Press the yellow function key Edit to go to the menu that will allow you to edit the marked hard drive recording The hard drive recording will be displayed in a preview window 1 In addition the markers set in this recording 2 will be indicated The markers Start and End are set 56 as a standard feature
90. ng markers gt Go as described above to the spot in your recording at which you would like to insert a marker Press the Record key to set a marker at the selected spot Continue in this manner to set markers at all desired places Markers can also be set during Record mode Point 8 1 4 as well as in the menu Manage hard drive Point 8 3 1 3 8 2 1 6 Jumping to markers You also have the option in playback mode of going directly to those spots of the recording you have marked as per Point 8 1 4 8 2 1 5 or 8 3 1 3 gt gt Press the Option key to open a window showing the available marks In addition the mark Current will be shown This designates the spot in the recording at which you have opened the window with the list of marks As soon as you select a mark by using the arrow keys up down the recording will be played from this spot Press the OK key to close the window and switch to normal playback operation 8 2 1 7 End playback session gt If you would like to end the playback session press the green function key Playback mode will be ended and the receiver will revert to normal operating mode The receiver will automatically remember the exact spot of the recording at which you have ended playing it The next time you start playing this recording the receiver will automatically continue at the spot where you ended playing it the last time 8 2 2 Playing MP3 files 49 8 2 2 1 On sc
91. o mark the file or folder you wish to delete gt Press the blue function key Functions to open a window listing the functions available gt Use the arrow keys up down to mark the line Delete and confirm by pressing OK gt To delete the marked file resp the marked folder you must now press the yellow function key Delete A query message will be displayed asking whether you really wish to delete the selected files gt Use the arrow keys left right to mark the field Yes and confirm by pressing OK Alternatively select No and confirm by pressing OK in order to abort the procedure 8 3 4 Hard drive information gt Press the OK key to display information on the integrated hard drive 63 8 3 5 Hard drive maintenance gt Press the OK key to obtain an overview of the number of recordings as well as the degree to which the hard drive is filled with data 8 3 5 1 Checking the hard drive gt To perform a check of the hard drive use the arrow keys left right to mark the field Check gt Press the OK key then confirm the message displayed by pressing OK again to start the procedure The hard drive will now be checked The result will be displayed once the procedure is completed 8 3 5 2 Formatting the hard drive When you format the hard drive the file system will be replaced This may become necessary if an error has been found while checking your hard drive Note All contents of the hard drive will be erase
92. of the broadcast will continue being recorded at the same time see the following examples Example Skipping advert breaks Would you like to watch a programme without annoying advert breaks The PVR lets you just skip over recorded advert breaks Time 14 00 15 00 16 00 17 00 18 00 19 00 l Recording i Advert break by PVR i i l Playback i Example Time shift playback You have missed the start of the Formula 1 race No problem The PVR will show you the race at a time shifted time while continuing to record the event Time 14 00 15 00 16 00 17 00 18 00 19 00 i i Recording Start Formula 1 Stop J i by PVR TEN i l Playback i by PVR Start Formula 1 Stop l 46 To go to a specific point in a currently running recording you can use the functions Play Pause as well as Fast Wind and the Jogshuttle as described in Point 8 2 Press the Info key to display the Infobox with a progress bar showing the playing and recording time elapsed 8 1 4 Setting markers while recording Press the Record key to open a window showing the functions available Use the arrow keys up down to mark the line Set mark confirm by pressing OK A marker will now be set at the current position Continue in this manner to set markers at all desired places Markers can also be set during Playback mode Point 8 2 1 5 as well as in the menu Manage hard drive Point 8 3 1 3 8 2 Playback function You can access hard dr
93. of the data channel required for downloading the ISIPRO have changed you can correct them in this menu as described under Point 9 4 4 manual programme search Current transponder data can be obtained from your retailer Generally under normal circumstances you should not make any changes in this menu Start availability test manually gt To check for the presence of new software manually press the yellow function key Check If new software is available a note will appear Start update gt To download the software use the up down arrow keys to mark the Start update field and confirm with OK Your receiver will then restart and will indicate the presence of new software by displaying a message 9 5 4 1 New software available Independently of whether you have switched the automatic updating function on or off the receiver will check each time you switch it on whether a new version of the operating 78 software for your digital receiver is available If a new version of the operating software is available this will be indicated by a message displayed on screen To start an update of the software simply follow the instructions on screen When the update of the software has been successfully completed an appropriate message will be displayed on screen 9 5 5 Copying settings You have the facility to copy all the settings such as programme list antenna settings etc of your digital receiver source transmitter to another
94. omatically aaan aaaea aaa eee 76 9 5 3 4 Update programme list manually anaa anaana eee 77 9 5 4 Updating software 0 0 eee rn 78 9 5 4 1 New software available 0 0 0 00 ccc eee rn 78 Hog GODVING SCUINGS PAP AA AA AA eae 79 9 6 System configuration LIMANG RK He BA PGE eee Beeb Eee LLANA DALANG 79 S Encryption SySteM a cu are ean N BAN KAN AMA howe behead ee ee toate os NG 719 10 Use with a rotating antenna DiSEqC 1 2 80 10 1 East and West lIMItS lt i aa oe ee ee NG GA Game disd KN ee eed oe ee 80 10 1 1 Deleting existing limits uen ae vi 9 8 nl 3374 MUSTA 08 KATAGALAN adeo ee ede be 80 10 1 2 Setting the East limit lll IBI 80 10 1 3 Setting the West limit uus s or ie E na Wa ROI hRIRROERAERRUEEYEESTREREAEEERIYE E EE 81 10 2 SCO DOSINOMING xau 3 5 1 pe eet HANG Bed toe S Se onde HUE E EYA nm dd Nada d 81 10 3 Setting a satellite position s ao uico dr RR E oon ER on t Rode ORE RR Ead 82 10 3 1 Select satellite position llli 82 10 3 2 Adjusting the satellite antenna llle 83 10 4 Current satellite list n n hr x CS beeen T ERU RO Died BRA E e Re s 84 10 4 1 Turning to a satellite position x 3 aa aon dames sew een ee wee haw dice dice wr dd 84 10 5 Deleting a satellite position ee ee eens 85 10 6 Reference position a ace ux Ea EUS MA ee ee RARE ALE eee ead ood MG MA S S NER 85 12 Technical data 000 cee 86 13 Troubleshoo
95. ompression Audio Mode Sampling frequencies Audio parameters Output analogue Output level L R Output impedance THD SIN Cross talk Volume Input analogue Input level l r Input impedance Output digital SP DIF output Video parameters Output level FBAS Output level Y Output level C Output level RED Output level GREEN Output level BLUE Y Pr Pb S N weighted Videotext Teletext filtering Scanning Teletext data Soft Videotext Output TV SCART Output VCR SCART Input Output MPEG 1 amp MPEG 2 Layer and Il MP3 Dual main sub Stereo 32 kHz 44 1 kHz 48 kHz 0 5 V r m s nominal 600 Ohms gt 60 dB gt 60 dB lt 65 dB when switched on Automatically selects last set volume 0 5 V r m s nominal gt 40 kOhms electrical Cinch socket optical To slink Dolby Digital 1 Vs s 0 3 dB to 75 Ohms 1 Vs s 0 3 dB to 75 Ohms 1 Vs s 0 3 dB to 75 Ohms 0 7 Vs s 0 1Vp p to 75 Ohms 0 7 Vs s 0 1Vp p to 75 Ohms 0 7 Vs s 0 1Vp p to 75 Ohms 1 V p p at 75 Ohm 0 7 V p p at 75 Ohm 0 7 V p p at 75 Ohm gt 60 dB corresponds to ETS 300 472 standard FBAS corresponds to ITU R BT 653 2 lines 6 22 and 320 335 800 pages memory RGB FBAS oder S Video RGB FBAS or S Video RGB FBAS or S Video FBAS 87 HDMI output Mains jack Ethernet Hard drive Hard drive type Hard drive No of recordings HDCP copy protection rev 1 1 or later HDMI d
96. or your unit will now be downloaded This procedure may take a few minutes gt If you do not wish to download the new software at this time press the yellow function key Skip gt If now new software is available at the present time press the green function key Continue You will then proceed to the programme search function Programme channel search ISIPRO You have various options of searching for new channels resp of updating the programme list You can either use the ISIPRO programme list function to download a new programme list for your receiver from the satellite or you can perform a programme scan search gt To download a current programme list use the up down arrow keys to mark the line ISIPRO programme list update gt Confirm using the green function key Start The current programme list will now be downloaded from the satellite Please note any messages displayed on screen as well as the explanations under Point 9 5 3 If you wish to perform a programme scan proceed as follows gt Use the up down arrow keys to mark the field All programmes if you wish to search for both free to air and encrypted programmes or All unencrypted if you wish to search only for free to air Programmes gt Start the scanning procedure by pressing the green function key and an automatic programme scan will be performed 16 All the satellites included in your antenna configuration will be scanned for Programmes This procedu
97. ou must now press the yellow function key Export The marked file will now be copied to the USB device and will then be displayed on the right half of the menu Please note that this procedure may take quite some time depending on the size of the file Marking blocks To mark several files simultaneously proceed as follows gt Press the OK key to go to the selection mode The marked file will be indicated by a cross on the left hand side You can now use the arrow keys up down to also mark the preceding or the following files Once you have completed marking the desired files in this manner press the yellow function key Export to copy the marked files on to the hard drive 8 3 3 2 Preview This function allows you to start the playback of a file in a small preview window gt Use the arrow keys to mark the file you would like to preview gt Press the blue function key Functions to open a window showing the functions available gt Use the arrow keys up down to mark the line Preview and confirm by pressing OK gt To start the preview of the marked file you must now press the yellow function key Preview 8 3 3 3 Delete You can also delete a file on the internal hard drive resp on the USB device while working in this menu gt Use the red function key Set Top Box or the green function key USB devices to switch to the source on which the file or folder to be deleted is located gt Use the arrow keys up down t
98. ourites list will be indicated the reception data of which has changed or which are no longer current It is possible that these programmes can no longer be received correctly with these data To ensure continued good reception you should accept the suggested changes gt Press the green function key Continue to update the reception data of the marked Programmes Deleting programmes In this step you can delete programmes that are still included in your Favourites list but are no longer being broadcast gt If you wish to delete the programmes indicated that are no longer being broadcast confirm by pressing the green function key Continue Adding a TV or radio programme In the next step the programmes of the new programme list will be displayed individually You can add these to your own Main Favourites list as they are not yet included there If you have activated the function providing several Favourites lists as per Point 6 6 1 and you would like to add a newly found programme to the other Favourites lists as well you must accept these individually into each Favourites list as per Point 9 1 Accepting programmes individually gt If you would like to add the programme displayed to the suggested place in the main Favourites list TV or Radio press the green function key Yes or gt Use the arrow keys to move the programme displayed to a different position of the Favourites list or enter the preferred programme slot number
99. owing combinations of recording and playback Recording a programme and simultaneously watching another programme 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format or call up any recording on the hard drive Simultaneously record two programmes 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format even if these are received in differing reception fields Simultaneously receive two different programmes even differing fields of reception 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format and at the same time show a previously recorded programme If only one antenna connection is available for connection to the receiver only a limited range of recording and playback options is available 22 Record a programme and at the same time another programme from the same reception field 1 programme in HD format and 1 programme in SD format or 25 programmes in SD format or show any programme from the hard drive Simultaneously record two programmes from the same reception band 15 programme in HD format and 1 programme in SD format or 2 programmes in SD5format Simultaneously record two different programmes from the same reception band 15 programme in HD format and 1 programme in SD format or 2 programmes in SD format and at the same time play a pre recorded programme 6 5 4 Setting the switching matrix The menu lists the four switching c
100. ownwards compatible to DVI 10 100baseTx Socket RJ45 Auto MDIX cable cross over 3 5 inch controller intended for 160 to 500 GB 999 max max duration of recording 26 hours per recording Display Vacuum fluorescence 16 digit 5x7 point matrix 7 mm character height Serial interface RS 232 Type Bitrate Connector Function USB interface Connector Function LNB power supply LNB current LNB voltage vertical LNB voltage horizontal 22 kHz modulation RS 232 bidirectional 115 2 kBit s max D SUB socket 9 pin Update for operating software and pre programming 1 USB 2 0 host connector Update for operating software and pre programming USB stick external hard disc Connection to PC via Host to Host cable 2 x 400 mA max short circuit proof 14 0V no load 11 5 V at 400 mA lt 20 V no load gt 17 2 V at 400 mA LNB switched off in standby mode 22 kHz amplitude 0 6 V 0 2 V Programme memory satellite positions TV favourites list Radio favourites list TV radio Total list DiSEqC 5000 TV programmes 5000 radio programmes Total of 6000 programmes possible in Total list DiSEqC 1 0 and DiSEqC 1 2 EPG data TechniSat EPG 2 0 EPG preview Timer Events max max 7 days in advance 30 events one year in advance 88 Remote control Remote control system Subsystem address Modulation frequency Infrared wavelength Power supply Power unit Consumption lt 1 W lt 3
101. play Some of the remote control functions will be deactivated e g calling up the main menu 2 Video recorder timer A video recorder timer is used to switch your digital receiver on and off for the selected programme in order to record it on an external recording unit e g a video recorder in your absence Please note that you must programme your video recorder to record the programme If the unit was switched on by the video recorder timer this will be indicated by VCR Timer in the display Some of the remote control functions will be deactivated 3 Channel switching timer If your unit is in normal operating mode it will switch to the programmed channel slot at the set time In contrast to the hard drive or video recorder timer options the unit remains fully functional and is not switched off after the programme has finished 43 8 1 2 1 Manual programming of timer gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Manage timer gt Confirm by pressing OK The sub menu Manage Timer will be displayed gt Use the arrow keys up down to select the desired Timer type gt Press the OK key to go to the entry window used for programming a new Timer event Programme gt Use the arrow keys to mark the upper line of the menu gt Press the OK key gt In the selection window that is now displayed use the arrow keys up down to select the desired source TV or Ra
102. re may take a few minutes Please note any messages displayed on screen Loading EPGplus data Your digital receiver has an Electronic Programme Guide EPGplus Electronic Programme Guide Your receiver must first download the EPGplus data from the satellite in order for the Electronic Programme Guide data to be displayed Your receiver will start loading the EPGplus data automatically for this purpose after the programme list update or programme scan has finished This procedure can take up to 30 minutes gt If you do not want to wait for the EPGplus data to load you can skip the process To do this press the yellow function key Skip The EPGplus data will then be updated automatically the following night or you can update it manually at any time see Point 7 16 1 Ending the installation assistant gt Confirm the final message of the installation assistant by pressing the green function key Finish to return to normal operation 17 6 Settings Now that you have connected your new digital receiver and commenced operating it you can if you wish proceed to optimise its functions for your preferences 6 1 Operating language This menu item gives you the opportunity of setting the language used in all the menus according to your preference gt Use the Menu key to call up the Main menu gt Now use the up down arrow keys to mark the menu line Operating language gt Confirm by pressing OK The sub menu Operating
103. rect remote control code Point 6 2 3 Remove snow from dish Antenna incorrectly adjusted Readjust antenna Dish at reception location is too small Use larger antenna Obstruction between dish and satellite e g a tree Short circuit in LNB connection Install dish with unobstructed line of sight Switch unit off fix short circuit switch unit on again Defective or missing cable connection Check all cable connections Defective LNB Replace LNB Wrong external unit selected on the receiver Correct setting see Point 6 4 Antenna incorrectly adjusted Readjust antenna No picture no sound no display Check mains cable and plug No reception for programmes that were functioning well previously Antenna cannot be rotated Antenna defective or misadjusted Check antenna Programme being transmitted on a different transponder Perform scan see Point 9 4 Programme no longer being broadcast Motor not compatible with DiSEqC 1 2 90 None Use suitable motor Time not shown in standby mode Time not acquired Set to major channel e g ZDF for approx 30 seconds Receiver cannot be operated Unit cannot be switched on or operated USB device not recognised No more hard drive recordings are possible Deleting hard drive recordings not possible Second encrypted programme cannot be viewed Unit blocked Unit blocked USB device is formatted in the
104. reen controls Your receiver is capable of playing files in MP3 format that have been stored on the hard drive or on a storage medium attached to the USB port The USB device should be formatted using the file system FAT 32 Consult Point 8 3 2 on how to copy files from a USB device onto the hard drive gt While in normal operating mode press the green function key to open the PVR navigator gt By pressing the blue function key the NAV Menu opens a further window gt Use the arrow keys up down to mark the entry Music and confirm by pressing OK gt Use the arrow keys up down to select the source from which you wish to play back the MP3 files and confirm by pressing OK A list of the MP3 files available on the hard drive or the USB device will appear These are indicated by the symbol Folders located on the hard drive resp on the USB device will be indicated by the symbol cu gt Where appropriate first use the arrow keys up down to select the folder containing the desired MP3 file and confirm by pressing OK gt Use the arrow keys up down to select from the list the MP3 file you wish to play first and confirm by pressing OK The file selected will now be played Thereafter the other files located on the same source medium resp in the folder selected will be played automatically Skipping titles gt Press the arrow up down key to skip to the next resp the previous title Pause gt Press the yellow function ke
105. reen function key you will then be taken to the next step of the installation procedure If you press the red function key you will be taken to the previous step of the installation thus giving you an opportunity to correct errors at any time If the initial installation is not performed or if it is aborted the receiver will commence operation with a standard pre programmed procedure The initial installation process shown here serves merely as an example The exact process of the initial installation will depend on the settings you select Please therefore follow all instructions displayed on screen carefully Operating language gt When starting the installation assistant the first selection window to be displayed will be that for the Operating language gt Using the arrow keys select the desired operating language gt Confirm by pressing the green function key Accept Country setting gt Using the arrow keys select the country in which the unit is being used The selection made here will result in the time zone being set and will affect the sorting of the programme list gt Using the green function key confirm Accept in order to accept the selection of the picture format Picture format gt Using the arrow keys right left adjust the picture format of the connected TV set Depending on your selection the automatic alignment of the picture to the TV set will take place gt To accept the selection and to gain
106. riteria for the DiSEqC control You receiver is pre programmed so that ASTRA is received on switch setting A A and Eutelsat is received on setting B A of a multi switch If the switching matrix of your receiving installation is set up differently or if you are receiving different satellites you can adjust the settings of your digital receiver to those of the receiving installation as follows gt Use the arrow keys to select a DiSEqC switch position 1 4 to which you wish to allocate a satellite e g A B 3 No satellite and mark this line Press the OK key Example 1 2 satellites Twin LNBs A selection table listing various satellites will now be displayed Use the arrow keys to mark the desired satellite Use the up down arrow keys to move the marker up or down one line at a time or use the left right arrow keys to move the marker backward or forward one page at a time If the desired satellite is not included in the list please use one of the reserve slots marked User 1 to User 13 Confirm by pressing OK The marked satellite will now be added to the menu Antenna settings at the previously marked position You can now adjust the settings in the menu Antenna settings in this manner until the settings in this menu correspond to those of your receiving unit For any switching criteria that you do not require use the setting No satellite 29 System examples Example 1 2 satellites Twin LNBs Example 2 4 satellites Twi
107. rk the Start download field and confirm with OK 9 3 Parental control Your receiver is equipped with a parental control function This means that important functions e g calling up the main menu can be protected from unauthorised use In addition recordings and channels that you have blocked can only be accessed by entering a four digit PIN code unit PIN To adjust settings in the menu Parental control proceed as follows gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Settings gt Confirm by pressing OK The sub menu Settings will be displayed gt Use the arrow keys up down to mark the line Parental control Confirm by pressing OK The menu Parental control will be displayed gt Use the arrow keys up down to move the marker within the menu and to change the individual positions as indicated When selecting a menu item please also note any messages displayed on screen 9 3 1 PIN query mode gt In this line use the arrow keys left right to set the pin query mode of the parental control function to Once or Never If you set the pin query mode to Once and have not yet changed the PIN you will be requested to change the PIN To do this proceed as described in Point 9 3 2 Never If you select the setting Never you will never be asked for the PIN The parental control function is switched off Once If you select the setting Once you will be asked to enter the PIN when
108. rol to move up or down the list one programme slot at a time 7 2 2 Using the numeric keys gt Use the numeric keys to enter the desired programme number For example 1 for programme slot 1 1 then4 for programme slot 14 2 then 3 then 4 for programme slot 234 1 then 5 then6 5 then 7 for programme slot 1567 When entering programme numbers with several digits you have approx three seconds time after pressing a key to complete the entry If you wish to enter a number consisting of only one two or three digits you can speed up the entry procedure by keeping the key depressed a little longer on the last digit 7 2 3 Using the Navigator programme list gt Press the OK key The programme list navigator will be displayed In TV mode only TV programmes will be shown and in Radio mode only radio Programmes The programme currently selected is marked gt Now use the arrow keys up down to mark the desired programme gt Press the OK key and the marked programme will be selected gt Use the arrow keys up down to move around the list one line at a time gt Use the arrow keys left right to move the marker up or down in the list one page at a time 7 2 3 1 Selecting a list To make it easy for you to find programmes your receiver provides several programme lists Thus you can choose to select from your Favourites list TV list see Point 9 1 or to see the alphabetically sorted Total list or the list by Providers 28 gt
109. rom the remote control are not put in with the household waste but are disposed of appropriately handed in at specialist shops special waste Safety notes For your own protection please read through the safety precautions carefully before proceeding to operate your new unit The manufacturer will accept no liability for injuries or damage caused by inappropriate handling or non compliance with the safety precautions The appliance has a fully integrated hard drive There is no provision for this drive to be exchanged other than by an authorised TechniSat retailer technician Any unauthorised replacement of the hard drive will mean that TechniSat will no longer guarantee that the appliance complies with legal requirements e g laws relating to appliance and product safety laws relating to electromagnetic compatibility of appliances The CE mark will no longer be valid When the altered product is sold on the person responsible for the alteration will become the manufacturer and will be liable accordingly The TechniSat guarantee will no longer apply either and warranty rights may be lost The appliance should only be operated in a moderate climate To ensure adequate ventilation place the appliance on a flat even surface and do not place any objects on top of it as there are ventilation slots here to allow heat to escape from the interior Do not place any burning objects e g lit candles on top of the unit 0 Do not
110. s a westerly W or an easterly E orbital position If the Geo Positioning function Point 10 2 is set to on you can now use the function turn to sat Point 10 4 1 to rotate the dish to the programmed user satellite position If the Geo positioning function is switched off you must rotate the dish to the desired satellite position manually Point 10 3 2 2 10 3 2 Adjusting the satellite antenna A test transponder has been set for each satellite to allow you to point the antenna at the desired satellite or to determine whether you are able to receive the desired satellite at the position set You can only adjust the antenna precisely once the signal strength and signal quality of the test transponder have been displayed 10 3 2 1 Test transponder LNB configuration To change the data of the test transponder in question proceed as follows gt Use the arrow keys to mark the field Current satellite list gt Press the OK key to open the satellite list gt Use the up down arrow keys to mark the satellite position for which you wish to change the data and confirm with OK gt Use the arrow keys to mark the field LNB Config and press OK The menu LNB settings will be displayed gt In this menu enter the data of the test transponder as well as of the LNB used as described in Point 6 4 4 gt Press the Back key to return to the settings for the motorised antenna 10 3 2 2 Positioning antenna manually You can determin
111. s menu to memory please proceed as follows gt Press the green function key Accept to store the changes made and to return to the menu Settings alternatively gt Press the red function key Back A corresponding query then appears gt If you wish to accept the changes use the arrow keys left right to click on the field Yes and confirm by pressing OK You will now return to the previous menu gt Press the TV Radio key to return to normal operation Settings will not be saved 6 5 Antenna settings Once you have set the digital receiver to your own individual preferences it may still be necessary to adjust the digital receiver to your antenna The menu Antenna settings lists the satellites set in terms of the installation assistant If the installation assistant was 21 prematurely terminated the satellite positions ASTRA and EUTELSAT will be pre programmed If you also wish to receive other satellites or if you are using a different LNB set your digital receiver to the desired data as follows gt Use the Menu key to call up the Main menu gt Use the arrow keys up down to mark the line Settings gt Confirm by pressing OK The menu Settings will be displayed gt Now use the arrow keys up down to mark the line Antenna settings DVB S gt Confirm by pressing OK The menu Antenna settings will be displayed DVB S The following settings can be made in this sub menu 6 5 1 Multi tenna If the rece
112. selection window Now use the arrow keys up down to mark the line Delete limits To delete the limits press the OK key V M V V Confirm the message with OK 10 1 2 Setting the East limit gt To enter the East limit first use the arrow keys to mark the field Save gt Now press the arrow key right to rotate the dish to the maximum East position possible resp desirable gt To open the window listing the available actions press the blue function key Actions gt Now use the arrow keys up down to mark the line set East limit gt To set the east limit press the OK key and confirm the following remark with OK 80 10 1 3 Setting the West limit gt gt To enter the West limit first use the arrow keys to mark the field Save Now press the arrow key left to rotate the dish to the maximum West position possible resp desirable To open the window listing the available actions press the blue function key Actions Now use the arrow keys up down to mark the line set West limit To set the west limit press the OK key and confirm the following remark with OK 10 2 Geo positioning If you have a suitable motor and if the geographical coordinates of your location are known this function can facilitate finding the individual satellite positions The coordinates for a number of German towns and cities are included in the Appendix Point 14 Note Only switch on the geo positioning function if your DiSEqC motor suppor
113. sh to add to the satellite list gt Press the OK key to accept the selection If the Geo positioning function Point 10 2 is switched on the dish will now be automatically rotated to the programmed satellite position The rotating procedure will be indicated by the blinking text display turn If the Geo positioning function is switched off you must rotate the dish to the desired satellite position manually Point 10 3 2 2 10 3 1 2 Setting a user defined satellite position User satellite gt To add a user satellite position to the satellite list use the arrow keys to mark the field Sat new gt Confirm by pressing OK A list of the available satellite positions will be displayed gt Now use the arrow keys up down to mark a user satellite position User 1 to User 13 gt Accept the satellite position by pressing OK gt Using the arrow keys now mark the panel LNB config for the adjustment of a Test Transponder In this menu proceed as described in Point 6 4 3 4 to enter the data of the test transponder as well as of the LNB used 82 gt When you have completed setting the test transponder press the Back key to return to the menu for setting the motorised antenna gt Use the arrow keys to mark the panel fort he entry of the orbital position of the User Satellites gt Use the numeric keys to enter the orbital position of the user satellite gt Now press the OK key appropriately to indicate whether this i
114. sic in MP3 format and to view pictures in JPG format To copy the appropriate files onto the hard drive proceed as described in Point 4 to connect a USB device on which the MP3 files resp JPG files are stored to the USB port of the receiver Please note you can only manage MP3 files in the Copy music menu and only JPG files in the Copy pictures menu gt Call up the menu Manage hard drive as described in point 8 3 gt Use the arrow keys up down to mark the line Copy music resp Copy pictures in order to manage the appropriate files gt Confirm by pressing OK or A menu with two columns will be displayed with the left half set top box showing the files and folders present on the hard drive The column on the right USB device shows the files and folders stored on the USB device connected to the receiver gt Use the green function key USB devices to switch to the USB device or the red function key Set top box to switch to the hard drive The first file resp the first folder on the list will be marked 60 8 3 2 1 Copying The Copy function will effect a copy of the marked file resp folder to be stored on the hard drive resp the USB device The original file resp the original folder will remain unchanged gt Use the arrow keys up down to mark the file resp the folder you wish to copy on to the hard drive resp on to the USB device gt Press the blue function key Functions to open a window showing the functions
115. starting times Where a channel provides the facility of selecting starting times this will be indicated gt To select one of the available starting times press the Option key A selection window will be displayed showing the available starting times gt Use the arrow keys up down to select the desired starting time gt Confirm by pressing OK The programme is validated for the starting time you have set you can proceed to view this at the desired time 7 3 3 Simultaneous reception of two encrypted programmes Your receiver is able to receive two different encrypted programmes simultaneously using only a single Cl module and a single valid Smartcard However this is only possible when using a Dual Decrypt compatible CI module see specifications given by manufacturer of Cl module and then only if both desired programmes are located on the same transponder Please also note the item Cl Dual decoding in the Special functions Point 6 6 3 30 7 4 Volume control You have the facility to adjust the volume of your digital receiver This facilitates the easy operation of the receiver as it means you have all the important functions on a single remote control and will only rarely have to resort to using the remote control of the television set When you switch on the digital receiver sound will be reproduced at the volume level last set gt To adjust the volume of your digital receiver press Volume to increase the volume
116. t 8 3 2 on how to copy files from a USB device onto the hard drive gt While in normal operating mode press the green function key to open the PVR navigator By pressing the blue function key NAV Menu a further window will be opened 53 gt Use the up down arrow keys to mark the line Pictures and confirm with OK gt Use the arrow keys up down to select the source from which you wish to view the picture files and confirm by pressing OK A list showing the picture files available on the hard drive or on the USB device will be displayed These are indicated by the symbol Folders located on the hard drive resp on the USB device will be indicated by the symbol u gt Where appropriate first use the arrow keys up down to mark the folder containing the desired picture file and confirm by pressing OK gt Use the arrow keys up down to select from the list the JPG file you wish to view and confirm by pressing OK The picture selected will now be displayed in large format Show next previous picture gt Press the arrow keys up down to skip to the next or previous picture Rotate picture gt Press the blue or red function key to rotate the picture clockwise or anticlockwise respectively Stop gt To exit from picture viewing mode press the green function key You will return to normal operating mode Switching folder levels gt While a picture is being displayed in large format first press OK to activ
117. table motor via the co axial cable gt Call up the Antenna settings menu as described under Point 6 4 and switch the DiSEqC control Point 6 5 1 on gt Now use the arrow keys up down to select the DiSEqC position e g A B 3 to which you wish to allocate the motor antenna gt Press the OK key to open a window allowing you to select the Satellite resp the Motor antenna gt Use the arrow keys up down to select the line Motor antenna and confirm by pressing OK gt Confirm the note on setting the East and West limits with OK 10 1 East and West limits To avoid mechanical damage to the satellite dish or the LNB by physical obstacles you must first set the maximum degree of rotation to both East and West If there are any obstacles in the rotating field of the dish e g a wall or chimney these must definitely be considered when setting the East West limits If there are no obstacles in the rotating range of the dish set the limits so that the dish can be rotated a little further than the most extreme locations of the satellites to be received 10 1 1 Deleting existing limits First you should delete any limits that may exist gt Use the arrow keys left right to mark the column Configuration gt Now use the arrow keys up down in the line Motor antenna to mark the field Continue gt Confirm by pressing OK The menu for setting the motor antenna will now be displayed Press the blue function key Actions to open a
118. tching xau reb E Rd een dee cabo ce GOES X 86 Feeds esas NG 31 7 7 Return to last programme previously selected 0 0 ce eee eee eee 32 7 8 Display clock and programme information na nn aa aaaea 32 7 9 Additional programme information naana aaea ee eee ees 32 7 10 Transponder information aaa 32 AW Freez AA AA 32 R E o AA E 33 PAS SUDINICS 222 cok ADD LAG EL UG tees betas AEG nd de uid EP Na AT EEN 34 7 14 PIP function picture in picture llli rrr BB 34 1o ZOO PICO RPRRETETTETOQTURTQRTTORTTTTILTOCTTTEPPPPPMPRPEEHPRE 35 7 16 EPGplus Electronic Programme Guide a 35 7 16 1 Downloading EPGplus data a 36 7 16 2 Interrupting the download procedure llle 36 7 16 3 Calling up the Electronic Programme Guide a 36 7 16 4 Now Table with current programme contents 00000 e eee ees 36 DAS Co ET of TACO MOG c P 37 7 16 7 EPGplus functions 26625254956 eude x ue SS AA 37 CAG A EPOPIUS IMOnMatON 2 23 2 s PPS AU SI OARATW P EIGQRRTEISDPEEE ERES 37 1 16 2 EPGplus Timer programming lt 226 e020 posae dro eR di etre 38 7 16 7 3 EPGplus programme overview lleeeee ers 39 7 16 7 4 EPGplus overview by type of programme genre 39 16 8 Ending EP GDIUS MOJE s recaudar titare AES kA SANAYAN PANG EPIS EE qs 40 7 17 Sleep Timer s ca wee 2S hed od sts BOE ERR 2 ec Beh PIE
119. ted will be indicated in a different colour The function keys red yellow blue and green are indicated by coloured bars at the bottom of the screen In the various menus these coloured bars represent different functions which can be implemented by pressing the appropriate coloured keys multi function keys on the remote control The function keys are only activated when a brief description is displayed in the appropriate field Key names and terms that appear in the OSD menu are shown in black type in this operating manual Help If present help text can be shown and hidden by pressing the blue function key Important note on data security We recommend that you save a backup copy of the data on your DigiCorder before handing the receiver over to the specialists for maintenance Recreating data is not part of the maintenance and repair work TechniSat will accept no responsibility for loss of or damage to data during the repair process 11 4 Connecting the DVB receiver Mains connection Connection between the LNB 1 and the LNB input 1 of the DVB receiver Please note when operating the unit with one antenna signal the LNB must be connected to the LNB input 1 Connection between the LNB 2 and the LNB input 2 of the DVB receiver HDMI connection of the DVB receiver with the TV set Scart connection between the DVB receiver and television set mo 20 Scart connection between the video recorder and the VCR scart socket of the DVB
120. the EPG channel submenu If the parameters of the data channel required to load the EPGplus data have changed you can correct them in this menu Current transponder data can be obtained from your retailer Generally under normal circumstances you should not make any changes in this menu 9 2 5 Selecting TV channels programmes To obtain a better overview you can programme the electronic programme guide EPGplus to contain only your favourite channels Please note The more channels you include in the electronic programme guide the longer it takes to download the EPGplus data The download time will also be increased if channels are selected for EPGplus for which no EPGplus data is available Furthermore it may no longer be possible to provide the maximum 7 day preview as the number of channels in the electronic programme guide increases gt Press the OK key The Favourites list of TV channels will be displayed gt Press the red function key to open a selection window Here you have the option of selecting the desired programme list type You have the option of selecting the desired programme list type You can also select on of the various Favourites lists Refer also to Points 6 6 1 and 9 1 2 gt Using the up down arrow keys select the type of programme list e g favourites lists gt Confirm by pressing OK If the option of various Favourites lists was activated under Point 6 6 1 a selection window showing the various Favo
121. the Total list proceed as described under Point 9 1 5 1 but after calling up the programme list manager press the red function key Total list to switch to the Total list and then select the function Delete Before the programmes are deleted however the message will appear Do you really want to delete the programm s gt Use the arrow keys left right to select Yes or No gt Confirm the entry by pressing OK Please note that programmes deleted from the Total list will also be deleted from all Favourites lists 9 1 6 Sorting programmes To sort the order in which the programmes appear in your Favourites lists call up the programme list manager as described in Point 9 1 1 Where appropriate you can now select the desired Favourites list gt Press the blue function key Functions A selection window will be displayed showing the functions available gt Use the arrow keys up down to mark the line Sort gt Confirm by pressing OK gt Now use the arrow keys up down to mark the programme you wish to place at a different position in the list gt Now press the yellow function key Sort A double arrow will be displayed next to the selected programme gt You can now use either the arrow keys up down and or the numeric keys to move the programme to the position in the list where you would like it to be placed gt Press the yellow function key Sort to store the programme at its new position gt To sort several pro
122. ting gt Press OK to select on If you do not wish to receive the additional data or if reception is not possible at your location data reception can also be switched off gt To switch off data reception set the item Updating to off 9 2 2 Updating time gt Use the numeric keys in the line Updating time to set the time when the automatic download of the EPGplus data should take place 9 2 3 Start category The electronic programme guide offers various forms of displaying information categories Overview This form of display provides a quick overview of all channels included in the electronic programme guide Programmes This form of display provides a table with the current day s programmes of a single channel Genres If you are interested in specific types of programmes you can have the programme information displayed according to specific genres e g movies news sports etc Last used With this setting the display type last used will be selected when EPGplus is called up gt Press the OK key in the line Start category to open the list of the available start categories gt Use the up down arrow keys to select the display type to be used when the electronic programme guide is called up and confirm with OK 68 gt If you select the start category Genres you can then also select the preferred genre e g film news shows etc as described above 9 2 4 EPG channel gt Press the OK key to call up
123. ting guide 0000 cee eee 90 Dear customer congratulations on your decision to purchase the DigiCorder HD S2X digital receiver The operating manual supplied is intended to help you utilise the comprehensive functions of your new digital receiver to the fullest extent We have kept the operating instructions as brief as possible and have used terminology that everybody can understand The range of functions of your receiver is constantly being expanded in the form of software updates This means that additional steps in the operation may be added that are not yet described in this operating manual or the operation of existing functions may be changed For this reason you should occasionally visit the TechniSat homepage to download the current version of the operating manual We wish you many years of viewing pleasure with your TechniSat DigiCorder HD S2X Your TechniSat Team Your unit bears the CE mark and meets all the necessary EU standards Subject to changes and printing errors As at 10 07 TechniSat and DigiCorder HD S2X are registered trademarks of TechniSat Digital GmbH Postfach 560 54541 Daun www technisat de Technical Hotline 0180 5005 910 0 14 EUR min from Deutsche Telekom AG numbers Note If you need to return your unit please use the following address only TechniSat Teledigital AG Service Center L derburger Str 94 39418 Sta furt Haomi HDMI the HDMI logo and High Definition Multimedia inter
124. ting to the marked programme If detailed information is available it is indicated by amp next to the 37 corresponding programme If there is a picture available it is indicated by gt Use the arrow keys or the function keys to mark the desired programme gt Press the EPG key to display information and or the picture relating to the programme gt Lengthy information text can be moved or paged through with the help of the arrow keys gt Press the Back key to return to the previous table 7 16 7 2 EPGplus Timer programming You can use the EPGplus Electronic Programme Guide to programme timer events easily You can also use this function to programme the Timer for Multifeed programmes e g from the Premiere Sport Portal Timer can only be programmed for Multifeed programmes in the EPGplus programme overview see Point 7 16 7 3 gt Use the arrow keys or the function keys to mark the desired programme gt Press the Record key to programme a Hard drive Timer for the marked programme see Point 8 1 2 or gt Press the Option key once to programme a Channel change timer for the marked programme see Point 8 1 2 gt Press the Option key once again to change the Timer type to a VCR timer or gt Press the red function key Timer to open a selection window gt Use the up down arrow keys to mark the desired Timer type see Point 8 1 2 gt Confirm by pressing OK For control purposes the menu Managetimer
125. ts this function gt As described above call up the menu for adjusting settings of the motor antenna gt Use the arrow keys to mark the field Gropes gt Confirm by pressing OK The menu used to enter the location will be displayed gt Use the arrow keys left right to switch the geo positioning function on or off gt Use the arrow keys to select the field for entering the geographical longitude gt Use the numeric keys to enter the geographical longitude gt Now press the arrow key left gt In this field use the OK key to indicate whether the value entered refers to longitude East East or longitude West W gt Now use the arrow keys to mark the field used to enter the geographical latitude gt Use the numeric keys to enter the geographical latitude gt Now press the arrow key left gt In this field use the OK key to indicate whether the value enter refers to latitude North N or latitude South S gt Using the Back key you will return to the settings of the motor antenna The data relating to your location must be entered as a decimal value correct to one decimal place As the coordinates are often stated in degrees minutes and seconds these must be converted to decimal values as follows The value for degrees is not affected by the conversion The minutes are divided by 60 and rounded to one decimal place The result of this division is added to the value for full degrees The seconds are
126. urites lists will be displayed gt Confirm by pressing OK The selected programme list will be displayed gt Use the arrow keys to mark a channel you wish to include in the electronic programme guide gt Press the yellow function key EPG to include the marked channel in the electronic programme guide or to remove it from the programme guide gt To include several channels in the electronic programme guide simultaneously mark these as described in 9 1 4 Marking blocks gt When you have completed marking the desired channels in this manner press the yellow function key EPG to accept the marked programmes into the electronic programme guide gt Press the Menu key to return to normal operation You can now start the downloading procedure manually gt Switch the receiver off using the On Standby key Standby gt Now while the message Load EPG is shown in the display press the EPG key The receiver will now perform the download procedure This will be shown by the 69 message Loading EPG and an indication of the EPGplus data already downloaded in the display panel gt The downloading procedure can be interrupted by switching the digital receiver on On Standby key 9 2 6 Selecting radio channels programmes Use the same procedure as described in Point 9 2 5 to include radio channels stations in the programme guide Start update gt To download the EPGplus data use the up down arrow keys to ma
127. wer edge of the screen If information is available for these days the corresponding fields will be marked To display the programme content of a specific day press the corresponding numeric key 7 16 8 Ending EPGplus mode gt Press the Menu or the TV Radio key to return to normal operation 7 17 Sleep Timer gt Press the Sleep Timer key once or several times to set the switching off time of the receiver in the range of 15 minutes to 2 hours At the end of the time selected the receiver will switch automatically to standby mode 40 8 Hard drive operation Your PVR receiver PVR Personal Video Recorder is equipped with an integrated hard disk drive There is no provision for this drive to be exchanged other than by an authorised TechniSat retailer technician Due to the availability of the hard drive you no longer require an external storage medium e g a video recorder The recording capacity is dependent on the size of the hard drive and on the volume of data of the broadcast material Where these are available from the provider the recording will include the actual audio and video data as well as any subtitles videotext data and additional sound channels broadcast These can be called up when you play back the recording as described in Points 7 5 7 12 and 7 13 8 1 Recording Various recording modes are available for saving recordings to the hard drive 1 Instant recording Use this type of recording to record a
128. will display the data relative to the selected programme If necessary you can effect any changes here see 8 1 2 gt Press the Back key to return to the previous table The appropriate line is now marked Depending on the Timer type your receiver will now be switched on at the starting time of the selected programme If the unit was switched on by the PVR Timer this will be indicated by PVR Timer being shown in the display In standby mode the active Timer will be indicated by a clock symbol next to the time display Deleting the EPGplus timer event gt If you would like to cancel an EPGplus programmed timer event proceed as described above to mark the corresponding programme gt Press the red function key Timer to open a selection window gt Use the up down arrow keys to select the line Delete timer gt Confirm by pressing OK or gt Delete a timer as described under Point 8 1 2 4 Timer settings pre and post run time With EPGplus Timer programming the receiver obtains the data relating to the selected 38 programme automatically from the EPGplus data Both the starting and the ending time of the programme will be taken over correct to the nearest minute However it frequently happens that the selected programme starts a little earlier or a little later than scheduled In this case the start or the end of the programme may be missing from the recording To overcome this problem you can enter a pre or post
129. wrong file system Hard drive is full Damaged hard drive file system The two programmes selected are not located on the same transponder CI dual decoding is not switched on The CI module is not compatible with Dual Decrypt 91 Press and hold On standby key on unit or remote control for approx 5 seconds Perform Flash reset Note All personal settings will be lost gt Pull out mains plug gt Press and hold Standby and Programme up keys on the unit simultaneously Keeping the Standby and Programme up keys held in put mains plug back in Hold keys in for approx 5 seconds and then let them go The message Autolnstall appears in the display Format USB device in FAT32 file system Delete existing recording s Check hard drive Point 8 3 5 Select two programmes located on the same transponder Switch on dual decoding see Point 6 5 3 Use a module with Dual lt Decrypt compatibility For everyday use Switching on and off gt Switch the digital receiver on by pressing the on standby key on either the unit itself or on the remote control gt Press the key again to switch the receiver off again gt The unit is now in standby mode the time will be shown in the display on the unit Programme selection Using the programme up down keys gt Use the up down programme keys on the remote control or the unit itself to move up or down by one position in the programme list
130. y the following reproduction combination become possible 34 to simultaneously reproduce two programmes 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format even if these are received from differing fields of reception to reproduce a programme of your choice and simultaneously reproduce a hard drive recording of your choice If only one connector is available for an antenna supply line then the reproduction combinations will only be of limited availability simultaneously reproduce two programmes 1 programme in HD format and 1 programme in SD format or 2 programmes in SD format from the same reception field reproduce any programme of your choice and simultaneously reproduce any hard drive recording of your choice Change PIP pictures gt Press the Back key to exchange the two pictures The PIP picture will be displayed as the main picture and vice versa Switch off PIP operation gt Switch Picture in Picture mode off by pressing the PIP key again The large main picture will be hidden and the small PIP picture will be displayed as the new main picture or gt Press the TV Radio key The small PIP picture will be hidden and the main picture is displayed unchanged 7 15 Zoom picture Using this function you can display 4 3 programmes on your 16 9 television set fully and true to the format The same applies to 16 9 programmes which are not transmitted signalised as
131. y time for the Infobox This can be varied from 1 second to 15 seconds 6 6 3 Cl dual decoding The Cl dual decoding feature allows you to receive two different encrypted programmes simultaneously using only one Cl module and only a single valid Smartcard gt Use the left right arrow keys to select the CI slot holding the Cl module for dual decoding Select CI1 C12 or C11 C12 If you prefer automatic recognition select auto The setting off indicates the Cl dual decoding feature is switched off Please also note Point 7 3 3 6 6 4 Radio background picture With this function the picture in the radio mode can be switched off This is kinder to the screen and you will save on current Here on means the picture is switched on also in radio mode off means the picture will be turned off in radio mode after about 30 seconds and stays off when a programme is changed auto means that the picture will be turned off after about 30 seconds in the radio mode and will briefly automatically appear during a programme change gt Use the right left arrow keys to set on off or auto 6 6 5 Memory format radio recordings Here you can select whether radio recordings on the hard drive should additionally be saved in the MP2 format These can be copied onto an external appliance gt Use the right left arrow keys to set PVR MP2 in order to additionally save the radio recordings in the MP2 format 6 6 6 Font size You can change the font siz
132. y to stop the playback operation Pause gt Press the key again to resume playing the file from the position at which it was stopped Stop gt To stop the playback operation press the green function key You will return to normal operating mode Switching folder levels gt During the reproduction operation press first of all the green Stop function key in order to activate the Navigator again gt To move from a folder to the next higher level use the arrow keys to mark the topmost line which is indicated by the symbol sw and confirm by pressing OK or gt press the Back key 8 2 2 2 Display control In order to avoid having to switch on the television set in order to be able to navigate an MP3 playback session you can also control this via the display on the receiver front panel 50 An MP3file will be indicated on the display with its respective name e g Sterne mp3 A folder will be indicated by a display of square brackets e g Popmusic The hard drive will be displayed as hard drive and a USB device will be indicated as USB device1 USB device2 etc gt While the receiver is in standby mode press the Language select key The receiver will switch itself on and will automatically call up the navigator in the Music category gt Use the arrow keys up down to select the source from which you wish to play back the MP3 files and confirm by pressing OK No USB device is connected to the system only the intern
133. you would like to have the updating of changes in the programme list performed automatically without any need for a manual procedure then you should select this option The changes will be implemented automatically Newly found programmes will generally be added to the end of the Main Favourites list 76 gt To update the new programme list automatically press the green function key Automatic The downloading of the programme list will be started and the progress of the procedure can be followed on screen 9 5 3 4 Update programme list manually When the download of the programme list has been completed your programme list will be updated To do this the Favourites list stored in the receiver will be compared with the new programme list The updating of your Favourites list is accomplished in several steps In this process the differences between your Favourites list and the new programme list will be displayed You can decide for yourself which changes you wish to implement and which not The number of steps to be taken depends on the extent of changes in the new list and can thus vary from one download to the next gt To update the new programme list manually press the yellow function key Manual The download of the programme list will be started and the progress of the procedure can be followed on screen as described under Update programme list automatically Adapting programmes In this step those programmes of your Fav

TechniSat HD S2X User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents