Home

Technics ST-C700 Operating Instructions

1. e The selected folder is empty Move tracks into the folder and retry the operation e The server is not found on the network Check to see if the server is connected to the same network as this unit and retry the connection to this unit gt 13 Error e Incorrect operation is performed Read the instructions and try again FOO 0 stands for a number e There is a problem with this unit Is the volume extremely high If so lower the volume Is this unit placed in an extremely hot place If so move this unit to a cooler place and wait a few moments and then try to turn it on again If the problem persists write down the displayed number disconnect the AC power supply cord and consult your dealer No Network Connection e This unit is not connected to the network Check the network connection gt 12 25 26 Not Conditional e The function you have tried to use is not available with the current settings Check the steps and settings PGM Full e The number of programed tracks is more than 24 Please Wait e This is displayed for example when this unit is turned on off For up to 1 minute and 30 seconds 33 Remote O O stands for a number e The remote control and this unit are using different codes Change the code on the remote control When Remote 1 is displayed press and hold OK and 1 for at
2. 4 Only plays the selected track as e 1 is displayed All All tracks in a folder are repeated e gt is displayed Off Turns off repeat mode Playing back content stored on the DLNA server by controlling it from a DMC By controlling a DMC Digital Media Controller compatible device you can play back music stored on the DLNA server on this unit DMR Digital Media Renderer 1 Raise the power switch lever of this unit to the I position 2 Operate the DMC compatible device and connect to this unit e The device name of this unit will be displayed as Technics ST C700_ 2 e For details on how to use DMC compatible devices refer to the operating instructions of the devices or the software EJ e You cannot use random repeat playback in combination with other playback modes e When you operate DMC playback of other audio sources will stop and DLNA output will have priority e Depending on the contents and the connected equipment operations or playback may not be possible 4 _ stands for a digit that is unique to each set 2 The device name can be changed from To make network related settings gt 12 13 Using iPhone iPad iPod Connect your iPhone iPad iPod and you can play back music stored on iPhone iPad iPod or charge iPhone iPad iPod E Compatible iPhone iPad iPod iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPh
3. or PP EL e lt may be necessary to select the album artist etc on the iPhone iPad iPod e Depending on the iPhone iPad iPod models operations on the remote control may not be possible Charging an iPhone iPad iPod During unit on charging starts when an iPhone iPad iPod is connected to this unit e Charging is not possible when this unit is turned off e Make sure the unit is turned on when you start charging When charging an iPhone iPad iPod whose battery is depleted do not turn this unit to standby mode until the iPhone iPad iPod becomes operational e Check the iPhone iPad iPod to see if the battery is fully charged Once fully charged remove the iPhone iPad iPod e Charging stops when the battery is fully charged The battery will deplete naturally Using AirPlay AirPlay works with iPhone iPad and iPod touch with OS 4 3 3 or later Mac with OS X Mountain Lion or later and PC with iTunes 10 2 2 or later Listening to music with AirPlay Preparation e Complete the network settings gt 12 e Connect the iOS device or PC to the same network as this unit 1 ios device Start the Music or iPod app pc Start iTunes 2 Select Technics ST C700______ 1 2 from the AirPlay icon e Check the volume settings before starting the playback When AirPlay is used for the first time the volume may be output at the maximum setting 3 Start
4. 2002 2003 2004 2005 2006 2007 2008 2009 Josh Coalson Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the Xiph org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBI
5. NFC is not working e Make sure the NFC feature of the device are turned on e When you try again change the angle at which the Bluetooth device touches the NFC touch area e Turn on the NFC feature of this unit when you connect a device using NFC gt 18 Remote control The remote control does not work properly e To avoid interference please do not put any objects in front of signal sensor gt 7 e Change the remote control code if other products react to this remote control gt 22 e f the SU C700 SL C700 is selected for the device to be operated press NWP and retry the operation gt 8 Pressing DIMMER changes the display the light and the indicator brightness of the SU C700 SL C700 e DIMMER works for the SU C700 SL C700 as well as this unit Turn off the device that you want to maintain the brightness level of and press DIMMER Messages The following messages or service numbers may appear on the unit s display AUTO OFF e The unit has been left unused for about 20 minutes and will enter standby mode within a minute Press any button to cancel it Checking Connection e The unit is checking the connected iPhone iPad iPod or a USB device Download Error e The firmware download has failed Press any button to exit Please try again later e The server cannot be found Press any button to exit Make sure that the network is connected to the Internet Empty
6. Unit e Do not place sources of naked flames such as lighted candles on this unit Placement e To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items e Keep your speakers at least 10 mm 3 away from the system for proper ventilation e Do not lift or carry this unit by holding any of its levers Doing so may cause this unit to fall resulting in personal injury or malfunction of this unit Battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not take apart or short circuit Do not recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Do not mix old and new batteries or different types at the same time e When disposing of the batteries please contact your local authorities or dealer and ask
7. Down gt il OK OK E RETURN Return HOME Touch and hold MENU Enter menu NFC touch area gt 18 The NFC touch area sheet is attached to this area at the time of purchase Product identification marking The model number is indicated Analog audio output terminal LINE OUT gt 9 Digital audio output terminal COAX OUT gt 9 Digital audio output terminal OPT OUT gt 9 Digital audio input terminal PC gt 17 For connecting to a PC etc 2 System terminal CONTROL gt 9 LAN port LAN gt 12 AC IN terminal AC IN gt 10 Remote control E Buttons that work for this unit NWP 9 Standby on switch Press to switch the unit from on to standby mode or vice va versa In standby mode the unit is still consuming a small NWP amount of power Y WWE o e The remote control do not operate when the power switch lever is in the lowered position UD Ey 55 os E gt gt INPUT INPUT AMP T o AMP NWP CD Select the device to be operated gt INPUT lt Select the input source DIMMER Adjust the brightness of the display etc gt 11 HOME Display HOME menu gt 11 INFO View content information Press this button to display the track artist and album names file type sampling frequency and other information A Y lt OK Selection OK RETURN Return to the previous displ
8. Off lt 3 Auto off function This unit is designed to conserve its power consumption and save energy The unit will turn to standby mode automatically if there is no sound and itis not being used for approximately 20 minutes e The factory default is On To cancel this function 1 Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select AUTO OFF and then press OK 5 Press A Y to select Off and then press OK EL e The auto off function works unless you turn it off even if you turn off and on this unit e If Network Standby is set to On this function will also be set to On To change the setting set Network Standby to Off 5 21 Network standby This unit can turn on automatically from standby mode when this unit is selected as the AirPlay DLNA player e The factory default is Off 1 Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select Network Standby and then press OK 5 Press A V to select On and then press OK EL e If this function is set to On the standby power consumption will increase Language Select English or French for the display e The factory default is English 1 Press NWP 2 Press HOME 3 Press A V repeatedly to s
9. being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOOR WMD co WARNING Unit e To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel Do not place heavy items on this unit AC power supply cord e The power plug is the disconnecting device Install this unit so that the power plug can be unplugged from the socket outlet immediately CAUTION
10. device amplifier etc e Check to see if the cable connections to the input and output terminals are incorrect If this is the case turn off this unit and reconnect the cables correctly e Check to see if the correct input source is selected e Insert the plugs of the cables to be connected all the way in e When Digital Output and Analog Output are set to Off no sound will be output Change the setting of the output terminal to be used to On gt 20 e Playback of multi channel content is not supported 23 24 The sound is interrupted e Depending on your environment the audio may be interrupted during playback Check the operating instructions of the connected device and the connection to the device Playback does not start e Depending on your environment or connected devices it may take some time The system control function is not working e Connect the system connection cable to the system terminal CONTROL1 of the SU C700 e Connect the coaxial digital cable to the digital audio input terminal COAX1 IN of the SU C700 The unit turns off automatically e Is the auto off function turned on gt 21 e f the SU C700 is connected to this unit via the system control function this unit may automatically enter standby mode when the SU C700 enters standby mode gt 9 23 AirPlay DLNA Cannot connect to the network e Confirm the network connection and settings gt 12 Ca
11. may cause undesired operation of this device FCC ID ACJ ST C700 IC 216A STC700 This transmitter must not be co located or operated in conjunction with any other antenna or transmitter This equipment complies with FCC IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines in Supplement C to OET65 and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping the radiator at least 20 cm 7 7 2 or more away from person s body excluding extremities hands wrists feet and ankles THE FOLLOWING APPLIES ONLY IN THE U S A FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determin
12. operate them easily with the remote control gt 23 E DIGITAL COAX3 IN COAX2 IN Coaxial digital cable System connection cable supplied CONTR Y TAN 10BASE T 100BASE TX SER No This unit rear LH e Do not use any other system connection cables or coaxial digital cables except the supplied one e Connect the system connection cable to the system terminal CONTROL1 of the SU C700 e Connect the coaxial digital cable to the digital audio input terminal COAX1 IN of the SU C700 Connecting to an amplifier and a D A converter You can output analog or digital audio signals from this unit and play back music files e g Audio cable not supplied OPTICAL IN Amplifier D A converter This unit rear Optical digital audio cable not supplied 10 AC power supply cord connection Connect only after all other connections are completed UNEO This unit LAN COAX OUT OPT OUT PC 10BASE T 63 100BASE TX rear oC Insert the AC power supply cord up to Y a point just before the round hole AC power supply cord E supplied J y To a household AC outlet EL e This unit consumes a small amount of AC power gt 27 even the power switch lever is in the OFF position Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time Place
13. play e The playback will start with a slight delay Operations on the remote control Stop Press W Press 1 1 Baus e Press again to restart play Skip Press 44 or gt to skip track EL e Playback of other audio sources will stop and AirPlay output will have priority e With some OS and iTunes versions it may not be possible to restart the AirPlay playback if the selector is changed or the unit is turned off during the AirPlay playback In this case select a different device from the AirPlay icon of the Music app or iTunes and then re select this unit as the output speakers e AirPlay will not work when playing back videos on Tunes 1 _ stands for a digit that is unique to each set 2 The device name can be changed from To make network related settings gt 12 Using USB device You can play back music stored on a USB device e This unit does not guarantee connection with all USB devices e FAT16 and FAT32 file systems are supported e This unit supports USB 2 0 high speed e USB devices may not be recognized by this unit when connected using the following a USB hub a USB extension cable e It is not possible to use USB card reader writers e This unit cannot record music to a USB device e About supported format refer to File format gt 29 Listening to music stored on a USB device 1 Connect a USB device to the unit
14. to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic Canada Inc Technics Stereo Integrated Amp 3 three years parts and labour Technics Network Audio Player 3 three years parts and labour Technics Speaker System 3 three years parts and labour Technics Compact Disc Player 2 two years parts and labour This warranty is given only to the original purchaser or the person for whom it was purchased as a gift of a Technics brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplicat
15. to select SETUP and then press OK 4 Press A V repeatedly to select F W Version and then press OK e Press OK to exit Remote control code When other equipment responds to the supplied remote control change the remote control code e The factory default is Mode 1 Point the remote control at this unit and press and hold OK and the numeric button for at least 4 seconds e When the remote control code is changed the new code will appear on the display for a few seconds OK 1 Set the code to Mode 1 OK 2 Set the code to Mode 2 EI e When the SU C700 SL C700 is connected via the system control function change its remote control code as well as the remote control code for this unit Changing the character encoding You can change the character encoding of track names artist names and other information when they are not displayed as they should be e The factory default is Type 1 HA Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select E Asian Character and then press OK 5 Press A V to select Type 1 HA Type 2 fai fk and then press OK Type 1 HA Priority is given to Japanese Ar Priority is given to Chinese Type 2 14 Simplified Using the system control function You can automatically link this unit wi
16. 1 2 Batteries for remote control ONLY FOR CANADA The enclosed Canadian French label sheet corresponds to the English display on the unit EL e Product numbers provided in this Owner s Manual are correct as of December 2014 These may be subject to change e Do not use AC power supply cord with other equipment E Using the remote control Insert the battery so the terminals and match those in the remote control Point it atthe remote control signal sensor on this unit gt 7 e Keep the batteries out of reach of children to prevent swallowing RO3 LR03 AAA Alkaline or manganese batteries Control reference guide This unit E Front ne Power switch lever Turn on off this unit e The remote control do not operate when the power switch lever is in the lowered position 2 Port for iPhone iPad iPod and USB devices gt 14 15 Remote control signal sensor Distance Within approx 7 m 23 ft directly in front Angle Approx 30 left and right Display Basic control switches These switches work just by touching the marks Each time you touch the switch there will be a beep sound gt 11 e When playback information is not shown on the display except in NFC registration standby mode gt 18 you can perform the following operations on the touch panel de A Up gt gt Y
17. If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake VA 23320 PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY a Shop D Accessories for all your Technics gear Go to www panasonic com accessories Get everything you need to get the most out of your Technics products Accessories amp Parts for your Camera Phone A V products TV Computers amp Networking Personal Care Home Appliances Headphones Batteries Backup Chargers amp more Customer Services Directory For Product Information Operating Assistance Parts Owner s Manuals Dealer and Service info go to www panasonic com support For the hearing or speech impaired TTY 1 877 833 8855 e el As of October 2014 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER 31 32 Limited Warranty ONLY FOR CANADA Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 TECHNICS PRODUCT LIMITED WARRANTY Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees
18. LITY OF SUCH DAMAGE Limited Warranty ONLY FOR U S A Technics Products Limited Warranty Limited Warranty Coverage For USA Only If your product does not work properly because of a defect in materials or workmanship Panasonic Corporation of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Technics Stereo Integrated Amp Technics Network Audio Player Technics Speaker System 3 three years 3 three years Technics Compact Disc Player 2 two years 2 two years During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States This warranty is extended only to the original purchaser of a new product which was not sold as is Mail In Service Online Repair Request Online Repair R
19. NERAL Power supply Power consumption Power consumption in standby mode When Network Standby is off When Network Standby is on Power consumption in off mode Dimensions WxHxD Mass Weight Operating temperature range Operating humidity range E TERMINALS SECTION Analog output LINE OUT Digital output Optical digital output Coaxial digital output System port System control USB Front USB Support memory capacity Maximum number of folders albums Maximum number of files songs File system USB port power PC Rear USB Ethernet interface LAN E FORMAT SECTION USB A USB Standard USB Mass Storage class USB B USB Standard USB Audio Class specification DSD control mode AC 120 V 60 Hz 26 W Approx 0 2 W Approx 4 W Approx 0 2 W 340 mmx78 mmX295 mm 13 9 8 x3 16 x 11 5 8 Approx 4 0 kg 8 8 lbs 0 C to 40 C 32 F to 104 F 35 to 80 RH no condensation Pin jack Optical terminal Pin jack 23 5 mm s jack Type A connector 2 TB max 800 8000 FAT16 FAT32 DC OUT 5 V 2 1 A max Type B connector 10 Base T 100 Base TX USB 2 0 high speed USB 2 0 high speed USB Audio Class 2 0 Asynchronous mode ASIO Native mode DoP mode DSD64 DSD128 playback 27 28 E ANALOG OUTPUT SECTION Channel Output level LINE OUT Frequency response THD N S N Dynamic range E BLUETOOTH NFC SECTION Bluetooth Bluetooth system specificati
20. S and other countries Android is a trademark of Google Inc aptX software is copyright CSR plc or its group companies All rights reserved The aptX mark and the aptX logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG Inc and any use of such marks by Panasonic Corporation is under license Other trademarks and trade names are those of their respective owners DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Direct Stream Digital DSD and their logos are trademarks of Sony Corporation MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries This product is protected by certain intellectual property rights of Microsoft Corporation and third parties Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties FLAC Decoder Copyright C 2000 2001
21. Technics Owner s Manual Network Audio Player ST C700 Music is borderless and timeless touching people s hearts across cultures and generations Each day the discovery of a truly emotive experience from an unencountered sound awaits Let us take you on your journey to rediscover music Rediscover Music Technics Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use If you have any questions visit U S A www panasonic com support Canada www panasonic ca english support Register online at www panasonic com register U S customers only E Features of this unit This unit offers the following features Digital Noise Isolation Architecture Since most digital content storage media are intended for use with PCs they are not designed with consideration for low noise which is critical to pure audio reproduction To overcome this challenge this unit employs a thorough measure against jitter and outstanding noise blocking technology for each of its interfaces delivering clear sound Virtual Battery Operation Virtual Battery Operation prevents power supply noise a factor that causes turbidity in sound from mixing into the audio signal The result is an improvement in sound localization performance and spatial expression Ultra Low Distortion Oversampling Digital Filter High precision oversampling eliminates distortio
22. VICE For product operation repairs and information assistance please visit our Support page on www panasonic ca english support IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid adequately insured and preferably in the original carton Include details of the defect claimed and proof of date of original purchase Panasonic Corporation of North America Panasonic Canada Inc Two Riverfront Plaza Newark NJ 07102 5490 5770 Ambler Drive y 3 Mississauga Ontario http www panasonic com LAW 273 www panasonic com En Panasonic Corporation 2015 SQT0495 Printed in Malaysia F0115BMO
23. ault gateway primary DNS etc e Do not play back music while changing these settings 1 Press NWP Press HOME 3 Press A Y repeatedly to select SETUP and then press OK Press A V repeatedly to select Network and then press OK Select and input the details Press OK to apply the settings Press RETURN repeatedly to exit the settings Press NWP 5 to turn the unit to standby mode e Wait until Please Wait disappears 9 Perform Wired LAN connection gt left A oO Y O u EJ e Use category 7 or above straight LAN cables STP when connecting to peripheral devices e Inserting any cable other than a LAN cable in the LAN port can damage the unit e If you try to change the network settings immediately after turning on this unit it may take some time until the network setup screen is displayed Playing back music files on the DLNA server You can share music files stored in the DLNA Certified media server PC smartphone etc connected to your home network and enjoy the contents with this unit e About supported format refer to File format gt 29 Preparation e Complete the network settings gt 12 e Comect the device to be used to the same network as this unit e Add the contents and folder to the libraries of the Windows Media player 11 or 12 or a smartphone etc Playlist of Windows Media player can play back only the contents that are stored in th
24. ay MENU Enter menu gt 18 19 21 DIRECT Turn on off Direct mode gt 20 RE MASTER Turn on off Re master gt 20 42 Basic playback control buttons O lt DIMMER Numeric buttons etc e To select a 2 digit number Example 16 210 gt 1 6 e To select a 4 digit number Example 1234 210 gt 210 gt 210 gt 1 gt 2 gt 3 gt 4 e CLEAR Clear the entered value E Buttons that work for the SU C700 SL C700 The remote control of this unit also works for the SU C700 SL C700 For information on the operations of the SU C700 SL C700 please also refer to their operating instructions Standby on switch for the SU C700 O Standby on switch for the SL C700 Select the device to be operated Select the input source of the SU C700 O Adjust the brightness of the display etc O Measure the characteristics of the amplifier and correct its output Adjust the volume O Mute the sound Getting started e Turn off all equipment before connection and read the appropriate operating instructions e Do not connect the AC power supply cord until all other connections are complete e Insert the plugs of the cables to be connected all the way in e Do not bend cables at sharp angles System control connection to an SU C700 e You can output digital audio signals from this unit and play back music e You can automatically link this unit with the SU C700 and
25. e g This unit front n USB device 2 Press NWP 3 Press gt INPUT lt below NWP repeatedly to select USB 4 Press A V to select an item and then press OK e f there are any other items repeat this step Operations on the remote control Stop Press W Press 1 I Pause e Press again to restart play Press 4 or gt P to skip track Skip e If you press either of these buttons during pause playback will restart During play or pause press and hold lt lt lt or gt gt Search e On the unit press and hold 4 or PP e This operation may not be available for some formats 16 E Random repeat playback Press RND Each time you press the button All tracks in a folder are repeated On randomly e RND is displayed Off Turns off random repeat mode E Repeat playback Press 5 Each time you press the button R Only plays the selected track Sack e 1 2 gt is displayed All All tracks in a folder are repeated e gt is displayed Off Turns off repeat mode LEI e You cannot use random repeat playback in combination with other playback modes e You can use repeat playback in combination with program playback Program playback This function allows you to program up to 24 tracks Preparation e lt is not possible to program tracks by moving folders Move a
26. e libraries To use Windows Media Player for streaming you need to configure it in advance Playing back content stored on the DLNA server by controlling it from this unit You can play back music stored on the DLNA server on this unit DMP Digital Media Player by controlling the DLNA server with this unit 1 Press NWP 2 Press gt INPUT lt below NWP repeatedly to select LAN e The server selection screen will be displayed 3 Press A V to select a DLNA server on the network and then press OK e The folder content selection screen will be displayed e Folders content may be displayed in different order from the order on the server depending on its specifications 4 Press A V to select an item and then press OK e lf there are any other items repeat this step Operations on the remote control Stop Press W Press P E Pause e Press again to restart play Press Ht4 or gt P to skip track Skip e If you press either of these buttons during pause playback will restart During play or pause press and hold Search 4 or gt gt e On the unit press and hold lt or PP E Random repeat playback Press RND Each time you press the button All tracks in a folder are repeated On randomly e RND is displayed Off Turns off random repeat mode E Repeat playback Press Each time you press the button
27. e surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER ST C700 SERIAL NUMBER THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state
28. ed above For example if you are using Windows Media Player 11 not all music files on the PC are playable You can play back only those added to the library of Windows Media Player 11 29 30 E About Bluetooth Panasonic bears no responsibility for data and or information that is compromised during a wireless transmission Frequency band used e This system uses the 2 4 GHz frequency band Certification of this device e This system conforms to frequency restrictions and has received certification based on frequency laws Thus a wireless permit is not necessary e The actions below are punishable by law in some countries Taking apart or modifying the system Removing specification indications Restrictions of use e Wireless transmission and or usage with all Bluetooth equipped devices is not guaranteed e All devices must conform to standards set by Bluetooth SIG Inc e Depending on the specifications and settings of a device it can fail to connect or some operations can be different e This system supports Bluetooth security features But depending on the operating environment and or settings this security is possibly not sufficient Transmit data wirelessly to this system with caution e This system cannot transmit data to a Bluetooth device Range of use e Use this device at a maximum range of 10 m 33 ft The range can decrease depending on the environment obstacles or inter
29. ed by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Trade Name Technics Model No ST C700 Responsible Party Panasonic Corporation of North America Two Riverfront Plaza Newark NJ 07102 5490 Support Contact http www panasonic com contactinfo Technics ST C700 THE FOLLOWING APPLIES ONLY IN CANADA CAN ICES 3 B NMB 3 B Table of contents IMPORTANT SAFETY INSTRUCTIONS uunnsneesnneeneennnn 5 USING PC etc eciciccroiinnoninionicianenianincnn dii
30. elect SETUP and then press OK 4 Press A V repeatedly to select Language and then press OK 5 Press A V to select English Francais and then press OK 21 22 Firmware updates Occasionally Panasonic may release updated firmware for this unit that may add or improve the way a feature operates These updates are available free of charge Preparation e Connect this unit to the network gt 12 Make sure that the network is connected to the Internet 1 Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select F W Update and then press OK 5 Press A V to select Yes and then press OK Do not disconnect the AC power supply cord or lower the power switch lever to the OFF position while one of the following messages is displayed Linking or Updating e During the update process no other operations can be performed When the update has finished successfully Success is displayed 6 Disconnect the AC power supply cord and reconnect it after 3 minutes LEI e f there are no updates No Need is displayed after step 5 e Downloading will require several minutes It may take longer or may not work properly depending on the connection environment E Checking the firmware version 1 Press NWP 2 Press HOME 3 Press A W repeatedly
31. ency Number a bits MP3 mp3 32 44 1 48 kHz 16 kbps to 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps to 320 kbps WMA wma 32 44 1 48 kHz 16 kbps to 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bit DSD dff dsf 2 8224 5 6448 MHz PC USB B gt Bit rate File format Extension Sampling frequency Number of quantization bits LPCM 32 44 1 48 88 2 96 176 4 192 kHz 16 24 32 bit DSD dff dsf 2 8224 5 6448 MHz LAN DLNA 2 File format Extension Sampling frequency N Bit rate E umber of quantization bits MP3 mp3 32 44 1 48 kHz 16 kbps to 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps to 320 kbps WMA wma 32 44 1 48 kHz 16 kbps to 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bit DSD dff dsf 2 8224 5 6448 MHz 1 If you download and install the dedicated app you can play back files in wide ranging formats gt 17 For details refer to the operating instructions of the app 2 Whether or not each music file can be played back over your network is determined by the network server even ifthe format of the file is list
32. equest To submit a new repair request and for quick repair status visit our Web Site at www panasonic com support When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power lin
33. evice will be disconnected if a different audio source is selected 19 20 Sound adjustment The following sound effects can be added to the audio output Listening to more natural sounding audio Re master Re mastering expands the playback band and achieves a higher bit depth to reproduce natural and expansive sound close to original music e The factory default is Off 1 Press NWP 2 Press RE MASTER to select On Off Direct mode This unit can transmit input signals without performing digital signal processing DSP This enables faithful and high quality reproduction of original sound e The factory default is Off 1 Press NWP 2 Press DIRECT to select On Off Setting the sampling frequency You can set an upper limit on the output sampling frequency range Please note that the range that can be processed differs depending on the amplifier or D A converter For details refer to the operating instructions of the connected device e The factory default is 32kHz 192kHz Preparation e Set Digital Output to On 1 Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select D Output fs and then press OK 5 Press A V to select an item and then press OK e You can select a sampling frequency of 96 kHz or 192 kHz Disabling audio output Disabling the audio
34. ference Interference from other devices e This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to other Bluetooth devices or the devices that use the 2 4 GHz band e This system may not function properly if radio waves from a nearby broadcasting station etc is too strong Intended usage e This system is for normal general use only e Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference example airports hospitals laboratories etc Made for iPod iPhone JiPad AirPlay Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance AirPlay iPad iPhone iPod iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries iPad Air and iPad mini are trademarks of Apple Inc Mac and OS X are trademarks of Apple Inc registered in the U
35. for the correct method of disposal Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local HE authorities or dealer and ask for the correct method of disposal CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Conforms to UL STD 60065 Certified to CAN CSA STD C22 2 No 60065 Product Identification Marking is located on the rear panel of the unit THE FOLLOWING APPLIES IN THE U S A AND CANADA This device complies with Part 15 of FCC Rules and RSS Gen of IC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that
36. hin 20 seconds gt 7 e Do not move the Bluetooth device until it displays a message or reacts in some way Once the Bluetooth device has reacted move the device away from this unit When the connection of the Bluetooth device is complete the name of the connected device is indicated on the display The location of the NFC touch area differs depending on the device When a connection cannot be established even if your Bluetooth device has touched the NFC touch area of this unit change the position of the device Ley e If you connect another NFC compatible Bluetooth device the previously connected device will be disconnected automatically e When the connection is established playback may start automatically depending on the type of device being used e Connecting by NFC may not work properly depending on the type of device being used e Do not make an NFC connection in any other way than instructed in the Owner s Manual Doing so may cause malfunction Listening to music stored on a Bluetooth device Press NWP 2 Press gt INPUT lt below NWP repeatedly to select Bluetooth e Ready is indicated on the display e If you press IH this unit will try and connect to the last connected Bluetooth device Linking is indicated on the display 3 Select ST C700 from the Bluetooth device s Bluetooth menu e The name of the connected device is indicated on
37. ion alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than an Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA INC BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other memory or recorded content This list of items is not exhaustive but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory WARRANTY SER
38. least 4 seconds When Remote 2 is displayed press and hold OK and 2 for at least 4 seconds Searching e The unit is checking the DLNA server on the network Unlocked e PC is selected but a PC is not connected Check the connection with the PC gt 17 e Audio signals such as sampling frequency components are not input correctly About supported format refer to File format gt 29 USB Over Current Error e The iPhone iPad iPod or USB device is drawing too much power Disconnect the iPhone iPad iPod or USB device and turn the unit off and on again Hub Device Not Supported Unrecognizable Device Unsupported Unsupported USB Device e You have connected an iPhone iPad iPod or USB device that is not supported If the iPhone iPad iPod is compatible turn it on and connect it correctly e The format of the file on the iPhone iPad iPod or USB device is not supported About supported format refer to File format gt 29 Unit care Pull out the AC power supply cord from the outlet before maintenance Clean this unit with a soft cloth e When dirt is heavy wring a wet cloth tightly to wipe the dirt and then wipe it with a soft cloth e Do not use solvents including benzine thinner alcohol kitchen detergent a chemical wiper etc This might cause the exterior case to be deformed or the coating to come off Specifications E GE
39. level can be adjusted between 10 and 10 EL e For information on the operations of the SU C700 please also refer to its operating instructions Troubleshooting Before requesting service make the following checks If you are uncertain about some of the check points or if the solutions indicated in the following guide does not resolve the issue then consult your dealer for instructions Heat buildup of this unit e This unit becomes warm when used for a long time This is not a malfunction Do you have the latest firmware installed e Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology gt 22 To return all settings to the factory defaults When the following situations occur reset the memory e There is no response when buttons are pressed e You want to clear and reset the memory contents Press NWP Press HOME Press A Y repeatedly to select SETUP and then press OK Press A Y repeatedly to select Initialization and then press OK Press A V to select Yes and then press OK Press A V to select Yes and then press OK again A humming sound can be heard during playback e An AC power supply cord or fluorescent light is near the cables Keep other appliances and cords away from the cables of this unit No sound e Check the volume of the connected
40. ll the tracks you want to program to a single folder in advance 1 Press PGM in the stop mode e Program Mode screen will be displayed 2 Press OK to display the programming screen Press A V to select the desired track 4 Press OK e Do steps 3 through 4 again to program other tracks 5 Press P H to start playback e To return to the Program Mode screen press W Operations on the remote control Press W Ea e Programed content is maintained Check the Press gt in the stop mode programed e To return to the Program Mode screen order press RETURN Add tracks Do steps 3 through 4 in the stop mode Press CLEAR in the stop mode Clear the last e It is not possible to select and clear the track desired programed track Press PGM in the stop mode Cancel e Program Clear is shown Press A V to select Yes and then press OK e The program memory will be cleared program mode LA e Programed content is maintained as long as the input source is set to USB e The program memory will be cleared When the USB device is disconnected When the unit is turned to standby or off mode e You can use program playback in combination with repeat playback Using PC etc You can connect the digital audio input terminal PC and a PC etc with a USB cable and play back music on the PC etc with this unit e Abo
41. n and enhances the sound quality of music sources thus reproducing sound rich with spatial expression E Recommended devices We recommend using Technics devices optional for superior audio quality Product name Model number Speaker System SB C700 Compact Disc Player SL C700 Stereo Integrated Amplifier SU C700 This product is set to be released in July 2015 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from
42. niita 17 ACCOSS OMNES oscivisenccscaicececescuitanedecee dann nnd nnnnen nnd nn ann 6 USING Bl etooth susc 5aucssasssonnananonnsennannnnanengannnnnnnnenn 18 Control reference guide nuesnssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 7 Sound adj stment en 20 Getting Started nnnensnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnnnnn nennen 9 MUNN O 21 HOME menu and basic operations nuunsnnnnnnennnnnnnennnnnn 11 Troublesh66ting 22222 2a a 23 Network settings nunsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nennen nn 12 Unica ca noia ii aana laaa aAa 26 Playing back music files on the DLNA server 13 MPECITICATIONS 2 24 42 ee 27 Using iPhoneliPad iPod uusnsnsnsssnnnnnnnnnennnnnnnnnnnnnnnnnn 14 Limited Warranty ONLY FOR U S A uum2u2s2unnenn nn 31 Using AirPlay u s040600n4 Hanni cri 15 Limited Warranty ONLY FOR CANADA 32 Using USB device uunnnsnessnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnen nennen 15 About descriptions in this Owners Manual e Pages to be referred to are indicated as gt OO e The illustrations shown may differ from your unit e Unless otherwise indicated operations are described using the remote control Accessories 1 AC power supply cord 1 System connection cable 1 Remote control K2CB2YY00098 K2KYYYY00233 N2QAYA000096 1 Coaxial digital cable K2KYYYY0025
43. nnot connect to the unit e Make sure that the multicast function on the wireless router is enabled e Make sure that the device and the unit are connected to the same network gt 12 e Reconnect the compatible device to the network and then connect to this unit again e Set Network Standby to Off gt 21 turn this unit off and on and then connect to this unit again Playback does not start The sound is interrupted e Simultaneous use with other 2 4 GHz devices such as microwaves cordless telephones etc may result in connection interruptions Increase the distance between the wireless router and these devices e If several wireless devices are simultaneously using the same wireless network as this unit try turning off the other devices or reducing their wireless network usage elf the playback stops check the playback status on the device iPhone iPad iPod Cannot operate e Select USB as the input source e Check that the iPhone iPad iPod is connected properly e Connect the iPhone iPad iPod again or try to restart the iPhone iPad iPod e The battery of the iPhone iPad iPod is depleted Charge the iPhone iPad iPod and then operate again iPhone iPad iPod does not charge e Make sure the unit is turned on when you start charging When charging an iPhone iPad iPod whose battery is depleted do not turn this unit to standby mode until the iPhone iPad iPod becomes operational The USB d
44. on Wireless equipment classification Supported profiles Supported codec Frequency band Operating distance 2ch 2 0 Vrms 2 Hz to 90 kHz 3 dB 0 0012 1 kHz 0 dB 112 dB IHF A 112 dB IHF A Bluetooth Ver 3 0 Class 2 2 5 mW A2DP AVRCP aptX Low Latency AAC SBC 2 4 GHz band FH SS About 10 m 33 ft Line of sight EL e Specifications are subject to change without notice e Mass and dimensions are approximate 1 When the iPhone iPad iPod is not charging 2 Prospective communication distance Measurement environment Temperature 25 C 77 F Height 1 0 m 3 3 ft Measure in Mode 1 E File format This unit supports the following file formats e This unit does not support the playback of copy protected music files e Playback of all files in formats supported by this unit is not guaranteed e Playback of a file in a format not supported by this unit may cause choppy audio or noise In such cases check to see if this unit supports the file format e This unit does not support VBR Variable Bit Rate playback e Some of the connected devices servers may be capable of converting files in formats not supported by this unit and output them For details refer to the operating instructions for your server e File information sampling frequency etc shown by this unit and playback software may differ from each other USB A File format Extension Sampling frequ
45. one 4 iPhone 3GS iPhone 3G iPad Air iPad 3rd and 4th generation iPad 2 iPad iPad mini 2 iPad mini iPod touch 2nd through 5th generation iPod nano 3rd through 7th generation as of November 2014 Ley e Compatibility depends on the software version Update your iPhone iPad iPod to the latest software before using it with this unit e Please be aware that Panasonic accepts no responsibility for the loss of data and or information e Do not connect the following models to the port iPod classic iPod 4th color display and 5th video generation iPod nano 1st generation Unexpected behavior may occur e Operation results may vary depending on the iPhone iPad iPod models or the OS version Connecting an iPhone iPad iPod When connecting an iPhone iPad iPod use the dedicated USB cable not supplied e g N iPhone etc This unit front USB cable Tt not supplied 14 Listening to music stored on an iPhone iPad iPod 1 Connect iPhone iPad iPod to the unit 2 Press NWP 3 Press gt INPUT lt below NWP repeatedly to select USB 4 Start play Operations on the remote control Stop Press W Press P IM Pause e Press again to restart play Skip Press lt or gt P to skip track During play or pause press and hold Search lt lt or gt gt e On the unit press and hold lt
46. output of unused terminals minimizes noise and allows playback in higher audio quality e The factory default is On 1 Press NWP 2 Press HOME 3 Press A V repeatedly to select SETUP and then press OK To disable the digital audio output Press A V repeatedly to select Digital Output and then press OK To disable the analog audio output Press A V repeatedly to select Analog Output and then press OK 4 Press A V to select Off and then press OK e To enable the output again select On L e Depending on the music source that you play back the applied setting may be less effective e Depending on the music source that you play back it may not be possible to achieve the desired audio quality and sound field effect In such cases turn off this function e Both Re master and Direct mode cannot be set to On e When Digital Output and Analog Output are set to Off no sound will be output e lt may take some time to output audio when you have adjusted the audio quality Others Sleep timer The sleep timer can switch the unit to standby mode after a set time 1 Press NWP 2 Press MENU 3 Press A V repeatedly to select SLEEP and then press OK 4 Press A W to set the time in minutes and then press OK 30 minutes lt gt 60 minutes lt gt 90 minutes lt gt 120 minutes A gt
47. rive or its contents cannot be read e The USB drive format or its contents is are not compatible with the unit gt 29 No response when gt I1 is pressed e Disconnect the USB device and then reconnect it Alternatively turn the unit off and on again Slow operation of the USB flash drive e Large file size or high memory USB flash drive takes longer time to read The PC does not recognize this unit e Check your operating environment gt 17 e Restart the PC turn off and on this unit and then reconnect the USB cable e Use another USB port of the connected PC e Install the dedicated driver if using a PC with Windows Cannot find music files stored on the PC e When you play back music files over a network those that are not registered to its network server are not displayed For details refer to the operating instructions for your server Bluetooth Pairing cannot be completed e Check the Bluetooth device condition The device cannot be connected e The pairing of the device was unsuccessful or the registration has been replaced Try re pairing the device e This unit might be connected to a different device Disconnect the other device and try re pairing the device The device is connected but audio cannot be heard through this unit e For some built in Bluetooth devices you have to set the audio output to ST C700 manually Read the operating instructions for the device for details
48. ss HOME 3 Press A V repeatedly to select SETUP and then press OK 4 Press A V repeatedly to select Beep and then press OK 5 Press A V to select On Off and then press OK Operations using the dedicated app Technics Music App If you install the dedicated app Technics Music App free of charge on your tablet smartphone you can control this unit and the SU C700 using a wide variety of functions For details visit www technics com support 11 12 Network settings You can stream music from an OS device iPhone iPad iPod an Android device or a PC Mac Windows to this unit by using the AirPlay or DLNA feature gt 13 15 To use these features this unit must join the same network as the AirPlay compatible device or the DLNA compatible device Wired LAN connection Normally just connecting a LAN cable will complete the setup This unit rear mo a Yoomoly A Broadband router etc y IS Y y PC etc O Cm e O O LAN cable not supplied 1 Disconnect the AC power supply cord 2 Connect this unit to a broadband router etc using a LAN cable 3 Connect the AC power supply cord to this unit and raise the power switch lever to the H I position gt 10 To make network related settings You can change this unit s name on the network Friendly Name and use specific IP address subnet mask def
49. th the SU C700 and operate them easily with the remote control Preparation Connect this unit and the SU C700 with a system connection cable and a coaxial digital cable gt 9 2 Set the power switch lever of this unit and the SU C700 to the 0 1 position E Switching this unit and the SU C700 to on standby simultaneously e If you point the remote control at this unit and press NWP when this unit and the SU C700 are in standby mode this unit and the SU C700 will be turned on simultaneously e When both this unit and the SU C700 are turned on and the input source of the SU C700 is set to COAX1 you can set them to automatically enter standby mode using the sleep timer gt 21 E Switching the SU C700 s input source automatically When you perform an operation such as playback on this unit the input source of the SU C700 will be automatically switched to COAX E Adjusting Bass Middle Treble You can adjust the tone of the SU C700 with this unit Each tonal range Bass Middle Treble can be adjusted Press NWP 2 Press HOME 3 Press A W repeatedly to select SETUP and then press OK 4 Press A W repeatedly to select Tone Control and then press OK 5 Press A Y to select On adjustment and then press OK 6 Press A W to select BASS Bass MID Middle or TREBLE Treble 7 Press lt gt to adjust the level and then press OK e Each
50. the display 4 Start playback on the Bluetooth device Operations on the remote control Stop Press W Press 1 I Pause e Press again to restart play Bluetooth transmission mode You can change the transmission mode to prioritize transmission quality or sound quality 1 Press NWP 2 Press gt INPUT lt below NWP repeatedly to select Bluetooth e If a Bluetooth device is already connected disconnect it 3 Press MENU 4 Press A V repeatedly to select Link Mode and then press OK 5 Press A V to select the mode and then press OK Mode 1 Emphasis on connectivity Mode 2 Emphasis on sound quality default Lo Skip Press 44 or gt to skip track During play or pause press and hold Search lt lt or gt gt e On the unit press and hold lt or PP Ley e This unit can only be connected to one device at a time e To use this unit s remote control with a Bluetooth device the Bluetooth device must support AVRCP Audio Video Remote Control Profile Depending on the status of the device some controls may not work e Select Mode 1 if the sound is interrupted Disconnecting a Bluetooth device 1 Press NWP 2 Press MENU 3 Press A V repeatedly to select Disconnect and then press OK 4 Press A V to select Yes and then press OK LE e The Bluetooth d
51. the unit so the plug can be easily removed HOME menu and basic operations Major functions of this unit can be operated from the HOME menu Preparation e Prepare the music that you want to play back e Turn on the connected device amplifier etc and lower its volume 1 Raise the power switch lever of this unit to the I position 2 Press NWP 3 Press HOME 4 Press A V to select an item and then press OK e f there are any other items repeat this step Connects this unit to a network and LAK plays back music over it gt 13 Plays back music stored on a USB USB device or an iPhone iPad iPod gt 14 15 16 PC Plays back music stored on a PC etc gt 17 Connects this unit to a Bluetooth Bluetooth device and plays back music stored on it gt 18 19 SETUP gt 11 12 20 21 22 23 5 Start play E To display HOME menu Press HOME Adjusting the volume Adjust the volume of the connected device amplifier etc Display brightness The brightness of this unit s display and the basic control switches can be changed Press DIMMER repeatedly EL e When the display is turned off it will light up only when you operate this unit Before the display turns off again Display Off will be displayed for a few seconds Operation sound setting You can turn the beep sound on off e The factory default is On 1 Press NWP 2 Pre
52. ting by NFC Connecting via Bluetooth menu Preparation e Turn on the Bluetooth feature of the device and place the device near this unit Press NWP 2 Press gt INPUT lt below NWP repeatedly to select Bluetooth 3 Press MENU 4 Press A V repeatedly to select Pairing and then press OK 5 Press A V to select Yes and then press OK e Pairing is indicated on the display 6 Select ST C700 from the Bluetooth device s Bluetooth menu e The name of the connected device is indicated on the display EL e If prompted for the passkey input 0000 e You can register up to 8 devices with this unit If a 9th device is paired the device that has not been used the longest will be replaced Connecting by NFC For NFC compatible Bluetooth devices Android devices with version 4 1 or later only With the touch of an NFC Near Field Communication compatible Bluetooth device to this unit you can complete a series of steps from registering a Bluetooth device to connecting it to this unit Preparation e Turn on the NFC feature of the device Press NWP 2 Press gt INPUT lt below NWP repeatedly to select Bluetooth 3 Press MENU 4 Press A W repeatedly to select NFC and then press OK 5 Press A V to select Yes and then press OK 6 Touch and hold your device on the NFC touch area of this unit wit
53. ut supported format refer to File format gt 29 Connecting to a PC Before connecting to a PC follow the steps below e Refer to the following for the recommend OS versions for your PC Windows Vista Windows 7 Windows 8 Windows 8 1 OS X 10 7 10 8 10 9 10 10 Download and install the dedicated driver to the PC Only for Windows OS Download and install the driver from the website below www technics com support Download and install the dedicated app Technics Audio Player free of charge on your PC Common to both Windows OS and OS X Download and install the app from the website below www technics com support as of November 2014 Listening to audio from a PC etc 1 Disconnect the AC power supply cord 2 Connect this unit and a PC etc e g This unit rear Type B USB 2 0 cable not supplied Type A LE E PC etc 3 Connect the AC power supply cord to this unit and raise the power switch lever to the H I position gt 10 4 Press NWP 5 Press gt INPUT lt below NWP repeatedly to select PC 6 Operate the PC etc for playback 17 18 Using Bluetooth You can listen to the sound from the Bluetooth audio device from this unit wirelessly e Refer to the operating instructions of the Bluetooth device for details e If you intend to use an NFC Near Field Communication compatible Bluetooth device proceed to Connec

Technics ST-C700 Operating Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents