Technicolor - Thomson 29dl25ud User's Manual
Contents
1. 17 a Picture Adjustment 19 elf List of 19 9 Uum 20 ed Selecting Programmes 21 2 Scrolling the Programmes 21 Audio visual AV Programmes 21 Volume 21 7 Muting the Sound 21 Zoom 16 9 models only 21 Displaying Information 21 Television Lock 21 Switching Off the Television 21 Teletext 22 Standard Functions 22 Other Connections 23 Other Possibilities 23 Speaker connection 23 Euro AV socket connections 24 C17 dolby int 4100 GB TBA 163 B Basic connections The mains plug 1 supplies power to the television The television must only be plugged in to a 220 240 V 50 Hz power supply It must never be plugged in to a DC source If the plug comes away from the lead never attempt to plug it in this could cause electrocution The aerial socket 2 located on the rear ofthe television can be used to connect an external aerial or other appliance equipped with a modulator such as a VCR satellite receiver etc If you connect an appliance to the aerial jack you must give ita channel number To do this switch on the appliance then use the television to find the modulator channel see the appliance manua2. You can use external amplifiers instead of the television configuration see Speaker Connection page 23 Amplifier with a Dolby Pro Logic decoder Connect the left L and right R CINCH plugs from the television set to your amplifier If there are rear speakers Surround disconnect them from the television set Select Normal mode from the SOUND menu Setthe sound using the amplifier 17 Stereo amplifier Connect the left L and right R CINCH plugs from the television set to your amplifier Connect the rear speakers Surround to the television set Activate the Surround line in the SOUND SETTINGS menu Setthe sound ofthe Left and Right channels using the amplifier and the sound of the Center and Rear channels Surround using the television set SOUND SETTINGS menu In both cases activate the Ext amplifier function to cut the Left Right and Center channels of the television set if you have also activated the Surround option the central channel is not cut Note If you do not connect an external amplifier cancel this option LI Otherwise you will have no sound Sound type 1 The choices available to you depend on Sei the broadcast Select this line then select the type of sound you desire Sound mode 2 The choices available to you depend on the type of sound you previously selected The Magic and Dolby Virtual modes are only available in stereo if the Surround line has notb
3. gt Personal settings PERSONAL SETTINGS Return Menu language English Country UK Auto volume level AV1 name AV2 name AV3 name Prog to be used for reference time Select a station from which you want to get the reference time Select the line marked Return to return to the previous menu 15 Preferences 1 Display the SUMMARY by pressing and releasing the menu key on the remote control 2 Select the line marked Preferences 3 Display the menu using ok Make your choice from the proposed PREFERENCES Se options Use the information below to help Return you Show program number Show program number AV2 video input Video If you wish to permanently display the number AV3 video input S Video of the programme you are watching tick the box Format control Auto using the Left Right keys Press the Left Right Picture preferences keys again to deactivate this function AV2 video input Use the Left Right keys to select the type of video signal received at the AV2 SCART socket Video or S Video AV3 video input Use the Left Right keys to select the type of video signal received at the AV3 sockets these sockets are located on the front or the side of the television Format control Use the Left Right keys to select the desired picture format Auto if the transmitter for 16 9 format TV s or the appliance connected to one of the peripheral jacks delivers the switching signal the television autom
4. Audio visual AV Programmes Press the av key to call the last audio visual AV programme watched Press repeatedly to scroll the audio visual AV programmes on the screen Volume Control Use the volume keys to increase or decrease the volume Muting the Sound Press the En key to mute the sound Press again to restore the sound Zoom 16 9 models only This function is useful for 4 3 or letterbox pictures black bands at the top and bottom of the screen Use the Left Right keys to select the desired zoom position ZOOM 0 4 3 picture black bands at the sides FULL SCREEN for a 4 8 picture that fills the screen ZOOM 1 for letterbox pictures Displaying Information Press the info key to display the following information on the screen channel number and name time zoom type of sound Television Lock You can use this function to prevent anyone from switching on the television using the buttons on the television set The buttons on the television set are locked in the following cases If you switch off the set by pressing and holding the YO key on the remote control for more than 3 seconds After a programmed stop If the television is set to standby when the alarm has been set When the television is locked the red power will be light flashing The television can now only be operated from the remote control To release the lock press any number key on the remote control Switching Off the Television
5. To switch off the television press the Standby key on the remote control or press the ON OFF switch on the television set 21 Teletext Certain channels broadcast an electronic news page service with a range of different information services The presentation and use of the Teletext differ from one country to another and from one programme to another Teletext Fastext or Toptext Press the text key to display the Teletext Index page 100 A message will inform you if the programme you are watching has no Teletext service To call up a page Enter the 3 digits of the page number you wish to consult for example 150 or 170 After a moment the page appears Use the Left Right keys to consult the next or the previous page Standard Functions Rolling pages Some information is displayed over several sub pages It is scrolled on your screen as it is received To stop scrolling select STOP using the Up Down keys and validate using OK Press OK again to continue scrolling Masked text To reveal a hidden answer for example in a quiz programme select using the Up Down keys and validate using Ok Press OK again to hide the answers Zoom Select ZOOM using the Up Down keys then press the OK key once to magnify the top of the screen twice to magnify the bottom of the screen the page will scroll from top to bottom and a third time to return to the normal display Display You can superpose the Teletext page over th
6. 75W 24 Pin 19 pin 17 return 1 5 9 13 17 21 3 7 11 15 19 SIGNAL SELECTION Facilities are provided for automatic switching when the equipment connected provides switching voltages as follows Pin 8 9 5 V to 12 V Auto switching to auxiliary O AUX channel 4 5 V to 7 V 16 9 display Pin 16 1 V to 3 V Auto switching to RGB SIGNAL LEVEL Composite video 1Vp p 3dB in out positive going 75 W Sync 0 8 Vp p 3 dB 10 dB negative going 75 W RGB input 0 7Vp p positive going 75 W Audio in out 0 5 V r m s nominal Input impedance 10 kW 20 Hz 20 kHz Output impedance 31 kW 20 Hz 20 kHz THOMSON multimedia Sales UK Limited Crown road Enfield Middlesex EN 1 1DZ 253 408 80 CE THOMSON
7. Select program 2 Use the pr pr or Left Right keys and the programmes logos to find the programme Select programme number using to which you wish to give the No 1 PR PR or lt gt or 0 to 9 keys Its present number appears on the line marked Select program Select the line marked Return to return to the previous 3 Select the line marked Swap with PR menu Enter 01 A 5 Press Ok The two programmes swap position and the desired programme becomes N 1 6 Repeat the above procedure for the other channels To name your channels 1 Select the line marked Change pr name 2 Select the character you wish to modify using the Left Right keys 3 Use the 1 and 2 keys to display the letter you require The name you have entered will be memorised when you move to another line or exit the menu If you wish to change the order in which your programmes are displayed or if you wish to name other programmes repeat the procedures described above When you have finished organizing the programmes exit the menu using exit 11 Manual programming The manual installation function is useful if some programmes have not been installed even after AUTOMATIC INSTALLATION 1 Press and hold menu the SUMMARY is displayed first followed by the INSTALLATION MAIN MENU 2 Select the line marked programming 3 Display the menu using ok 4 Now continue by following the messages at the bottom of the
8. be displayed Country Indicate the country in which you are if you wish to rerun Automatic Programming LA Auto volume level This is a sound control function which aims to egualise the volume level between different channels and between different programmes on the same channel Activate or deactivate the auto volume level as required has been selected in the SOUND menu LA see Volume Control AV1 AV2 AV3 name Use these to give a name to each of your audio visual programmes Select the character you wish to modify using the Left Right keys Use the 1 or 2 keys to display the desired character For cable networks if certain channels have not been found select Other instead of the country name before run ning automatic installation again You may find that the characters of cer tain teletext languages are inaccess ible for the selected country On models equipped with Dolby Surround this function remains inactive if Dolby Virtual or Pro Logic Prog to be used for reference time To display the time using the info key or to use the alarm function the television clock must be set to the correct time Select the line marked Prog to be used for reference time and select a channel which broadcasts teletext The time is set automatically and is displayed after the channel number Exit the menu using exit INSTALLATION MAIN MENU Exit Manual programming Auto installation Programme organisation
9. of the programmes on the page displayed Enter the last digit of the programme number e g for 25 simply enter 5 on the remote control The list disappears and your programme is selected Or Select the programme using the Up Down keys Validate using ok Exit the menu using exit Page lt gt Programme 0 9 19 Daily viewing Time You can use this menu to switch your A television on or off automatically at a set time Return Display the SUMMARY using the menu key on Sleep timer the remote control Select the line marked Time Validate using ok The TIME menu is Current time displayed Wake up timer Sleep timer Wake up time Use the Left Right keys to choose how long you Programme number wish to view before the television switches off Daily The television will switch off automatically atthe OPIS period To cancel sot to 00 00 Select the line marked Return to return to the previous One minute before switching off a message will menu inform you that the television is about to go off If you wish to keep it on press any key on the remote control or the local keyboard The television switches to Child lock mode after an automatic stop It can only be switched on again from the remote control Current time The current time is given by the Teletext see PERSONAL SETTINGS menu You can also set the time manually using the number keys 0 to 9 on your remote control Wake up time
10. table below on models equipped with this function PLAY RECORD CALL Appliance SCART Socket Appliance SCART Socket PROGRAMME VCR ou Camcorder Peripheral Cinches or S Video AV3 Camcorder Speakers connection Internal external selection 9 cC mr U External amp 2 amp 2 Subwoofer TD do a Side speaker Side speaker A mm 5 Rear speaker n X Rear speaker E If you have connected external side speakers to the television set the internal external selection button located at the rear of the television set close to the connectors to the external position pushed down Use the tip of a pen 23 Euro AV socket connections The socket is shown as viewed from the rear of the TV NOTE If an unsynchronised TV l picture results after viewing an external source with a fast blanking signal connected to AV this voltage must be removed to return to TV mode VIDEO INPUTS Composite video or sync Pin 20 pin 17 return RGB Red Pin 15 pin 13 return Green Pin 11 pin 9 return Blue Pin 7 pin 5 return VIDEO OUTPUT Composite video AUDIO INPUTS A Pin 6 pin 4 return B Pin 2 pin 4 return AUDIO OUTPUTS A Pin 3 pin 4 return B Pin 1 pin 4 return FAST BLANKING INPUT Pin 16 1 V to V for fast blanking switching
11. updates The corresponding page number is indicated in the Telextext index Once you have found the page the sub title or the news flash will be overlaid onto the TV picture The navigation status bar disappears after a few seconds To display it again press the text key To exit Teletext press exit or text 22 Other Connections The CINCH Video and Audio sockets 1 are provided to 1 connect a VHS or 8mm camcorder The S and CINCH Audio sockets 1 are provided to connect a S VHS or Hi 8 camcorder S Touse the appliance you have connected press the av key several times until the AV3 programme is e e e l Y selected on the screen When you switch off the connected appliance the television will remain on VIDEO LE AUDIO R the AV3 programme and you must use the numerical keys on the remote control to select a programme The headphone socket 2 is provided to connect a on models equipped with this function headphone or earphones sound from the loudspeakers of the TV set Pressing the En button will mute the sound through the spea kers but not through the headphones Connecting a set of headphones does not mute the 2 f Y Other Possibilities Copying a cassette gt Plug the VCR you wish to record to into the SCART socket AV2 Plug the appliance you wish to copy from as follows into the peripheral jack AV1 for a VCR into the CINCH jacks lt for a camcorder see
12. 057 058 059 010 TOSHIBA 010 011 014 A If you cannot see the brand of your video recorder on this list try the codes of the other brands LI Navigation principles Calling up the INSTALLATION MAIN MENU If there is no menu displayed on the screen press and hold the menu key on the remote control The settings SUMMARY is displayed first followed by the INSTALLATION MAIN MENU which you can use to operate your television Calling up the SUMMARY Press and release the menu key on the remote control to display the list of menus available for using your television functions or adjusting your television Calling up a Menu Select the menu you wish using the Up Down keys Press the Ok key to validate Navigating within the Menus Use the Up Down keys to select a line Use the Left Right keys to Increase or decrease a value for example Fine tuning 4 mmm Select an option for example Reception Aerial Reception lt gt Cable Activate or deactivate an option for example Decoder Access a sub menu for example Picture preferences gt You can use the ok key to Activate or deactivate an option for example Decoder Access a sub menu for example Picture preferences gt Validate an action for example Store on PR number Use the exit 4 key to exit a menu INSTALLATION MAIN MENU Exit Manual programming Auto installation Programme organisat
13. Memorise using ok Name If the station has been identified by the transmitter its name will be inscribed automatically You can change the proposed name or enter it if it has not already been identified Select the character you wish to modify using the Left Right keys Use the7 or 2 keys to display the character you desire Decoder Use the Left Right keys to tick the box if the channel is coded and if a decoder is connected to the AV1 jack External sound path Switch on your decoder If the sound is coded or if you have no sound activate or deactivate the box as required using the Left Right keys Enter channel number or start autosearch with lt or gt Select the line marked Return to return to the previous menu you have made all the adjustments you wish to a programme go to Store on PR number and press ok to memorise these Then move on to the next channel Once you have completed your Manual Programming exit the menu using exit 12 Manual Programming Channel number guide Only the main transmitters are listed There are in addition many relay stations and full lists are available from the Broadcasting Authorities 0 London amp South East Bluebell Hill Crystal Palace Dover Heathfield Oxford South West Beacon Hill Caradon Hill Huntshaw Cross Redruth Stockland Hill Channel Islands Fremont Point South Hannington Midhurst Rowridge West Mendip East Sandy Heath Sudbury Tacoln
14. a n u a E e a n u a S e a n S e a n u a S e a n u a THOMSON About this manual This document is common to several television models Therefore certain functions or settings may not apply to the model you have purchased About the switch The position of the ON OFF switch D differs depending on the model It may be located on the front or on the right hand side of your set see the drawing inside the cover page of your manual About safety To ensure your own safety and safe operation of the equipment observe the following instructions thoroughly TV sets require sufficient ventilation to prevent their components from overheating which will cause failure Do not block the ventilation openings at the rear If you place your TV set in a special piece of furniture make sure there is enough space for unhindered air circulation Do not place the TV set in the close vicinity of a heater The TV set has been designed for use in dry rooms Should you use it in exceptional circumstances in the open air example on the balcony in the veranda or tent you must absolutely protect it against moisture dew rain splash water Before switching on a cold TV set in a warm room you should wait until any condensation in the screen has dried by itself Maximum ambient temperature 35 C Maximum humidity 8596 By the end of your TV evening or when away from home for a longer period we recommend that you turn off
15. again This procedure performs automatic degaussing of the screen Should there still be coloured spots on the screen repeat the operation e The pages of this publication are printed on recycled paper Installation Using the remote control and fitting the batteries About this manual 1 About the switch 000 1 About safely 5 222 Ad 1 About cleaning 1 About degaussing 1 Basic connections 3 TV VCR Antenna connections 4 TV Antena cse ES 4 TV NCR Antenna 4 Remote control 5 Television Functions 5 Video Recorder Functions 6 Navigation principles 8 Calling up the INSTALLATION MAIN MENU 232a dense dibus 8 Calling up the SUMMARY 8 Calling up a Menu 8 Navigating within the Menus 8 Installing your television for the first time 9 Automatic installation 10 Programme organisation 11 Manual programming 12 Channel number guide 13 Channel number guide Ireland 14 Personal settings 15 Preferences 16 How to call up a menu and how to select a function a setting or nOs option o Daily viewing 17 o Sound Settings
16. amming Channel number guide Ireland In addition to the RTE main transmitters listed there are many RTE transposers throughout the country If your area is not covered by a main transmitter and you are not sure of the channel numbers of your local transmissions your television dealer is the best person to advise you He will also know whether you need a horizontal or vertical aerial to suit the transmissions REPUBLIC OF IRELAND RTE 1 RTE2 North West Holywell Hill 23 26 Brougher Mountain 22 Truskmore 09 1 07 G Divis 31 North East Limavady 55 Clermont Carn 52 56 East Kippure 08 H 10 J Dublin amp East WALES BBC Three Rock 29 33 WALES West Presely 46 Maghera 02 B 08 H Central Cairn Hill 40 43 South West Mullaghanish 04 D 07 G South East Mount Leinster 06 F 09 1 Hol Hill lywell NORTHER IRELAND Truskmore gs 8 Clermont IRISH REPUBLIC Cairn Hill 14 28 27 62 BBC2 40 NORTHERN IRELAND BBC1 BBC2 UTV 25 24 59 HTV 43 CH4 32 21 65 S4C 50 Personal settings 1 Press and hold the menu key the SUMMARY is displayed first followed by the INSTALLATION MAIN MENU 2 Select the line marked Personal settings Display the menu using ok 4 Continue by following the messages at the bottom of the screen e For further details read the information below Menu language Select the language in which the menus are to
17. ancel press EXIT using the number keys 1 2 3 and the pr pr keys 10 Programme organisation During automatic installation your television will search for the channel name and assign it a programme number according to the selected country You can use the PROGRAMME ORGANISATION menu to name any channel name not found to change the order in which the channels are displayed or to delete channels for which reception is too poor Follow the messages at the bottom of the screen For further details read the information below R If you wish to access the d PROGRAMME ORGANISATION menu thereafter first press and hold the menu key on the remote control to display the INSTALLATION MAIN MENU the SUMMARY is displayed first followed by the INSTALLATION MAIN MENU then select Programme organisation and validate using Ok INSTALLATION MAIN MENU Exit Manual programming Auto installation gt Programme organisation Personal settings Todeletea programme for which reception is too poor 1 Select the line marked Select program 2 Use the pr pr or Left Right keys to list your channels 3 When you getto a channel you wish to delete Return select the line marked Delete program 4 Press ok to delete the programme PROGRAMME ORGANISATION Select program 5 Validate using ok Swap with PR Change pr name To organize your channels to suit you Delate Soora 1 Select the line marked
18. atically adapts to the transmitted picture format 16 9 manually selects widescreen picture format 4 3 manually selects this picture format If you have selected 16 9 or 4 3 the television will switch back to Auto when you change channels or you switch off Picture preferences To access the PICTURE PREFERENCES PICTURE PREFERENCES menu press ok Return If you wish you can personalize certain Settings ab Personal picture settings Select and set the Brigh ghtness proposed options Use the information Colour below to help you A Contrast Settings Select Standard or Personal Standard corresponds to the factory settings Personal corresponds to the settings that you have entered yourself The lines Brightness Colour and Contrast are displayed only if you have selected Personal on the Settings line Select each line one after the other and enter your required settings You can recall these picture settings by pressing the red key on the remote control Exit the menu using exit Select the line marked Return to return to the previous menu 16 Sound Settings The television set fitted with a Dolby Pro Logic decoder lets you create a cinema studio sound quality in your own home with a coded Dolby Surround signal or you can enjoy special sound effects with a stereo or mono signal by connecting 2 pairs of loudspeakers on some models one pair of speakers or simply using the sound faciliti
19. e TV picture To do this select MIX using the Up Down keys then validate by pressing the OK key Press again OK to return to the normal display Sub code You can use this to access a sub page directly Select using the Up Down keys Then enter the four digits of the required sub page number Certain programmes have Alarm pages that you can set to appear at the time you require For example e for 15h30 enter 1530 as the sub page number then press exit You must of course leave the television on the programme which is to transmit the Alarm page Index To call up the index page select 100 using the Up Down keys then validate using Ok Direct access You can use the yellow and blue keys to directly access the pages indicated in the bar at the bottom of the screen Fastext functions If the Teletext you receive is Fastext a sub menu at the bottom of the screen appears which you can use to select from the 4 headings according to its colour To select a heading press the key of the corresponding colour Toptext functions If the Teletext you receive is TOPtext the pages are arranged into headings and sub headings by subject You can select the first page of a heading directly by pressing the blue key or the first page of a sub heading by pressing the yellow key Other functions With certain Teletext channels it is possible to have sub titles overlaid on the screen for certain broadcasts as well as certain news flash
20. een activated in the SOUND SETTINGS menu Select this line then choose the desired mode using the Left Right keys Treble centre Bass centre These lines appear according to the 2 Sound mode selected Select each of the lines and set the bass and treble of the central channel Surround effect This line appears only if you have selected Sa Dolby Virtual on the Sound mode ine Select this line and adjust the surround effect to Suit you Treble Bass Select each of these lines and adjust to suit you Exit the menu using exit 18 Return Automatic Normal Sound type Sound mode Balance L R Treble Bass Surround effect 1 Broadcast Choice mono automatic mono stereo mono stereo dual sound 1 sound 2 NICAM 3 sound 1 sound 2 sound 3 AV Stereo sound 1 sound 2 2 Mode Effect Normal reproduces the original sound mono or stereo Wide gives a stereo effect on mono sounds Magic accentuates the stereo effects and adds echo Dolby Virtual Virtual Dolby Surround Hall Reverberation effect with rear speakers Pro Logic Cinema sound if the sound is coded in Dolby Surround with rear speakers Virtual Dolby Surround is based on Dolby Pro Logic decoding for the reproduction of the Left Right Centre and Virtual Surround sound channels using two loudspeakers Dolby Pro Logic and the double D symbol are trademarks of the Dolby Laboratories Licensing Corporation Ma
21. es of the television set Turn on the main switch and connect the speakers to the appropriate sockets The black terminals of the speakers must be connected to the black terminals of the television set likewise for the red terminals see Speaker Connection page 23 Display the SUMMARY using the menu key on the remote control Select the line marked Sound Validate using ok The SOUND menu is displayed Select and set the proposed options Use Sei the information below to help you Sound settings Use this menu to set the sound effect of your television To display the SOUND SETTINGS menu select the line and press ok According to your set up activate the external bass box Ext subwoofer line the external line Ext amplifier line the rear speakers Surround line Test balance Activate this function then set the following to the same sound level according to your set up the balance between the left and right channels Balance L R line the volume of the central channel Centre volume line the volume of the rear speakers Surround volume line Return To return to the SOUND menu Ext amplifier Return Sound settings Stereo Pro Logic Sound type Sound mode Treble centre Bass centre Treble Bass SOUND SETTINGS Return Ext subwoofer Ext amplifier Surround Test balance Balance L R Centre volume Surround volume
22. eston Midlands Ridge Hill Sutton Coldfield The Wrekin Waltham North Belmont Emley Moor North West Caldbeck Winter Hill North East Bilsdale West Moor Chatton Pontop Pike Scotland Angus Black Hill Sandale Caldbeck Craigkelly Darvel Durris Eitshal Keelylang Hill Knock More Rosemarkie Rumster Forest Selkirk 40 26v 50 49 57 57 22 55 51 33 51 39v 61 31v 58v 31v 51v 62v 22 46v 26 58v 22 46 33v 56 52 63v 63 28v 62 44 26 44 45v 55 24 64v 270 44 55v 28 40v 33 64v 28v BBC1 BBC2 ITV 43v 23v 66v 64v 60v 60v 25 59v 41 23v 41 42 58v 270 61v 24 41 59v 25 43v 23v 61v 25 47 28v 59v 29v CH4 65v 30v 583v 67v 583v 583v 32v 65v 47 29v 470 66v BBC1 BBC2 Wales Blaenplwyf 31v 27 Carmel 57 63 Llanddona 57w 63v Moel y Parc 52 45 Presely 46 40 Wenvoe 44w 51 Northern Ireland Brougher Mountain 22 28 Divis 31v 27 Limavady 55 62 1 So Orkney Keelylang ie bhnds lt Fremont Point Preselye Carm Wenvoe Rumster Forest Moor Phe Wrekin 9 Waltham Sutton Sandy Heath 2 Coldfield Rowridge Channel Blands 9 Belmont Ridge Hill Crystal 9 CH4 24 21 60y 53v 60y 53v 49 42 43v 50v 41 47 25 32 24w 21v 59v 65 Sudbury v Already transmitting NICAM 13 Manual Progr
23. ion Personal settings SUMMARY Exit Teletext gt Picture Sound List Time Preferences MANUAL PROGRAMMING Return Standard Reception Aerial Autosearch lt I gt CH Fine tuning Store on PR number Name Decoder External sound path Enter channel number or start autosearch with lt or gt c 292 OY n ni Installing your television for the first time First plug the television into a mains power outlet and to the external aerial or a cable network then switch on using the ON OFF switch CD located on the front or the side of your set When you switch on your television for the first time the language selection menu is displayed Fig 1 If this does not happen set the television to standby then press and hold the pr key on the television until this menu appears Installation Instructions start 1 Use the Up Down keys to select the language in which you wish the menus to be displayed 2 Then validate using ok 3 Alist of countries is now displayed Fig 2 Select the country in which you live or the country from which you wish to receive the broadcasts if you live in a border area 4 Then validate using ok 5 A welcome message is displayed 6 Run the automatic installation sequence using ok 7 A message appears to inform you that automatic installation has started Fig 3 Wait for a few minutes A new message will inform you when automatic installation i
24. l Now give it a programme number and memorise it see Manual Programming of channels Then when you wish to use the appliance simply select its programme number on the television This procedure is not required for VCR s not equipped with a modulator The SCART socket AV1 3 located on the rear of the television is intended to connect a VCR or a camcorder VHS 8 mm a Canal decoder a video games console or RGB signal emitting appliances The SCART socket AV2 3 located on the rear of the television is intended to connect a VCR or a camcorder VHS 8 mm S VHS or Hi 8 We strongly recommend the use of this type of connection which gives a better picture quality To use the peripheral appliance that you have connected press the AV key on your remote control press once to select AV1 twice to select AV2 three times for AV3 see Other Connections This selection is automatic for some appliances Pressing play on a VCR or switching on a satellite receiver connected to AV1 or AV2 will automatically switch on your television When you stop the VCR if you have not changed channels while watching the VCR the television automatically switches back to the channel you were watching beforehand If the television has been switched on from the VCR it switches to standby when the VCR is switched off The television automatically switches to 16 9 format if the connected appliance delivers the corresponding signal Conti
25. nental Europe AM 220 7240 V United Kingdom The plug is fitted with a fuse which protects your television If your television does not work the fuse may be blown In this case replace it with an identical 5 Amp ASTA or Ir BSI BS 1362 certified fuse Note the mains lead of your television is fitted with a moulded plug This lead contains all the safety equipment so you are advised when replacing it not to use a non specific commercially available model TV VCR Antenna connections In order to avoid any interference use the male to male adaptor and the male to female cable supplied with your TV set as shown below TV Antenna v d Male to male adaptor Male to female cable TV VCR Antenna jm to female cable supplied with TV Remote control lv vcr Display of channel time sound yellow button and zoom for models with zoom Television Functions is key is active only when using the Teletext blue key Call up programme list m green button Illumination of remote control buttons Standby Call up Teletext Toptext Fastext Reminder of picture preferences function purple button red button Right Left Selection within menus and Zoom Function for models with this Confirm an action or validate a function menu option To use the remote control for your TV set or video recorder Move Up Down in me
26. nufactured under licence from Dolby Laboratories Licensing Corporation Daily viewing Picture Adjustment PICTURE Display the SUMMARY using the menu key on the remote control Select Picture Validate Return using OK The PICTURE menu is displayed Select and set the proposed options Use the information below to help you Contrast Brightness Colour Contrast Sharpness Sharpness Select each of these lines one after the other and set as required Contrast expand Contrast expand Tone Select this line then choose the desired Contrast Select the line marked Return to return to the previous expand setting High or Low menu Tone Select this line then choose the desired colour tone Warm Neutral or Cold Exit the menu using exit List of Channels the number of programmes memorized For each programme the list indicates the station name or type and the programme number The 3 AV programmes are listed on page 11 A This list contains up to 10 pages The number of pages depends on To display the list press the list key on the remote control or Display the SUMMARY using the menu key on the remote control Select the line marked List Validate using ok The page displayed is the page containing the programme you are watching It is identified in the list by the symbol TV To display the next page press the Right key To display the previous page press the Left key If you wish to watch one
27. nus To leave a menu or Teletext Go to adjustment function MENU Volume adjustment Sound mute Change programme Go to programmes and enter Selecting appliances numerical values in menus connected to the television AV1 AV2 Video recorder functions For programme numbers higher than 10 press the 0 key on the remote control appears on the screen Now use the number keys on the remote control to enter first the tens digit then the units digit The red green yellow and blue keys are also used for the Teletext Please respect the environment Before throwing any batteries away consult your distributor who may be able to take them back for specific recycling Remote control tv ver You can use your remote control for some functions on most brands of video recorders Before using it you must enter the code of your video recorderjin the table on the next page following the adjustment procedure described below Video Recorder Functions You may find that this remote control is not compatible with your brand of video recorder or 4X that some functions are not available Entering your code Using the Video Recorder Set the remote control to 1 Set the remote control to VCR VCR To switch your video 2 While holding down the menu but recorderon ton enter a 3 digit code correspon ding to the brand of your video recor der These buttons have the same functions as some
28. of those on your video recorder remote control if it is from our brand 3 Release the menu button To change programme 4 Switch off your video recorder by pressing the button Selecting appliances con nected to the VCR AV1 AV2 Go to programmes and enter numerical values in menus 5 If the VCR does not switch off try one of the other codes correspon ding to your video recorder VCR functions rewind play forward When you change the bat teries you will have to enter the maker s code again Remote control YOUR BRAND OF VIDEO RECORDER MANUFACTURER S CODE X8 BLAUPUNKT 95 W8 2 BRANDT 001 012 002 059 010 DAEWOO 040 041 042 043 044 045 046 047 FERGUSON 001 002 060 012 053 055 057 059 010 FUNAI 030 GOLBSTAR 93 8 GRUNDIG 3 08 0b HITACHI 010 012 022 023 JVC 006 010 011 012 013 MITSUBISHI 048 049 NEC 039 NOKIA 003 010 035 038 NORDMENDE 001 002 012 054 057 058 059 010 ORION 024 025 026 027 028 029 PANSONC 08 00 00 RADIOLA 061 062 063 064 065 066 SABA 001 002 012 053 055 057 058 059 010 SAMSUNG 033 sw 09 00 01 SHARP 031 032 SONY 015 016 017 018 TELEAVIA 001 012 059 010 TELEFUNKEN 001 002 012 055 059 010 THOMSON 001 002 012 054
29. r A If you wish to be woken up by your television on the channel of your choice you must first set the television 2 clock to the correct time see above Use the Left Right keys to tick the box and display the Wake up timer menu A The lines Wake up time Programme number and Daily only appear if you have ticked the box on the line marked Wake up timer Wake up time Use the number keys 0 to 9 on the remote control to set the time at which you wish to be woken Programme number Select the programme you wish to be woken by Daily Tick this box if you wish to be awakened at this time every day Exit the menu using exit Set the television to standby using the D key on the remote control The red indicator light on the television flashes The television will come on automatically at the programmed time and will go off one hour later if you do not use the remote control 20 Selecting Programmes For channels 1 to 9 press the number key corresponding to the desired channel on the remote control For programme numbers higher than 10 press the key on the remote control appears on the screen Now use the number keys on the remote control to enter first the tens digit then the units digit If you press O while is already displayed the display returns to 0 in which case you can only select programmes 1 to 9 Scrolling the Programmes You can scroll through the programmes using the pr pr keys
30. s completed 8 If you wish to check or modify the channel organisation pre OK and see the hapter If you do not wish to modify the channel organisation you can exit the menu by pressing exit then watch the channel of your choice Choose the desired channel using the number keys 1 2 3 and the pr pr keys If you have a decoder see the Manual hapter Your television will only search for channels corresponding to the country you have selected See the Manual channel programming chapter to install any channels not found For cable networks read the channels not found The list of languages and countries may vary from one model to another Installation Instructions end 2_networ channel installation chapter to install any Fig 1 English gt Francais Deutsch Italiano Espanol Portugu s Nederlands Svenska Dansk Norwisch Fig 2 Exit United Kingdom Eire gt France Germany Italy Spain Portugal Holland Belgium and Luxembourg Switzerland Austria Sweden Denmark Norway COUNTRY SELECTION Other Select your country and press OK SEARCHING AUTO INSTALLATION 03 STATIONS FOUND Searching for TV stations Please wait To cancel press EXIT Automatic installation The Automatic installation function is useful if you have to go through the installation procedure again such as when moving house This function deletes all pre
31. screen For further details read the information below Standard Select the standard using Left Right keys that corresponds to your country from the list of standards The number of standards proposed will differ from one model to another Manual INSTALLATION MAIN MENU Exit gt Manual programming Auto installation Programme organisation Personal settings MANUAL PROGRAMMING Return Standard France for France and Luxemburg DKK eg for Eastern Europe and Reception the Middle East Autosearch for the United Kingdom and Fine tuning Ireland Store on PR number Euro BG for Western Europe Name Decoder Reception Your television can pick up channels either via External sound an aerial RF channels or via a cable network Certain cable networks use the same frequencies as the RF channels If this is the case you must select Aerial instead of Cable Autosearch Enter the programme number if you know it If not search using the Left Right keys Your television will stop at the first channel it tunes into If you wish to memorize it go to the line marked Store on PR number If not resume the search using the Left Right keys Fine tuning You can use this to improve the picture if the transmitter frequency is out of adjustment Use the Left Right keys to obtain the best possible picture and sound Store on PR number Enter the programme number you wish to give the channel e g 01 for BBC1
32. the TV set with the On Off switch The mains plug must be easily accessible In the following cases we recommend that you pull out the mains connector 1 During a thunderstorm In such a case it is advisable that you also disconnect the TV set from the aerial socket 2 When odour or smoke emanates from the set Never attempt to open your TV set yourself Further information The TV set shielding is sufficient to prevent X radiation to the exterior Any operation performed by a non skilled person change of high voltage or replacement of the picture tube by a model not complying with the manufacturer specification are likely to cause considerable increase in X radiation A TV set modified in such a way no longer complies with the manufacturers specification and must not be used About cleaning The screen is to be cleaned with liquid glass cleaners Never use abrasive products Clean the cabinet with a soft cloth soaked with neutral cleaner Do not use solvents such as white spirit or alcohol based cleaning products since they may damage your television At regular intervals clean the ventilation grids at the rear of the TV set About degaussing The terrestrial magnetic field may have an influence on your TV set This influence is revealed by the coloured spots which appear on the screen Should this be the case Turn the equipment off by means of the On Off switch Wait about one hour before switching the set on
33. viously memorised programmes To install a new channel you should use the Manual programming function Before running AUTO INSTALLATION check the PERSONAL SETTINGS menu to ensure that the country displayed is correct programming chapter to install any channels not found For cable networks if you have not found certain channels select Other instead of a country name in the PERSONAL SETTINGS menu then run automatic installation again A Your television will only search for channels corresponding to the selected country so see the Manual INSTALLATION MAIN MENU 1 Press and hold the menu key on the remote Exit control to display the INSTALLATION MAIN M I MENU The SUMMARY appears first ante programming followed by the INSTALLATION MAIN Auto installation MENU Programme organisation 2 Select the Auto installation line Personal settings 3 Validate using ok A message will inform you that Automatic installation has begun Wait for a few minutes A new message will inform you when Automatic installation is completed SEARCHING If you wish to check or reorganize your channel display press the OK key and see the Programme organisation chapter AUTO INSTALLATION 0000000000000 0 If do not wish to reorganize your 03 STATIONS FOUND programmes you can exit this menu by pressing exif then watch the programme of Searching for TV stations your choice Choose the desired programme Please wait To c
Download Pdf Manuals
Related Search